Base Gasket's Cagiva Mito!

TGR · Crazy Courier Joined: 10 Sep 2006 Karma :

Finally found abit more time to work on the Mito and this time I had to strip the top end. So I did the job I needed to do and then opened the full gasket kit and in the kit is 3 head gaskets Shocked

so since I took only one gasket off which one would I use?

https://img175.imagevenue.com/loc366/th_81490_001_122_366lo.jpg

top blue one is the thickest and the other blue and the black are basically the same thickness as each other just different colours.
____________________
1991 Kawasaki ZXR400L - 1999 Suzuki GS500E - 1990 Kawasaki ZX750R H2 - 1991 Honda CBR 600 - 2015 Skyteam Monkey 125

salty21 · World Chat Champion Joined: 07 Jun 2006 Karma :

maybe different thicknesses to adjust the squish thing(the gap between the cylinder head and the piston at TDC) but may be wrong, im sure someone will be along shortly to correct me if i am
____________________
04 NSR 125(sold) Sad

---- 03 CBR 600rr(sold) Sad

----90 pan euro ST1100 ' Shocked

' ----02 CG 125 Smile

94 CB400 Super Four ---- 2000 VTR SP1 (sold) ---- 08 ninja p8f(sold, meh) ----05 CBR600rr Smile

tatters · Exxon Valdez Joined: 04 Jan 2004 Karma :

There base gaskets the mito uses a orange "o" ring for the cyilnder head
____________________
Past:NRG50,AF1125(x2),NSR125RR,ZZR250,CX500,VFR400,KR1S,ZZR600(x2),CB400N,YZF1000(x2),KH125,Z200,FX400R,CBR954RR(x2)GPZ500S,GT550,VFR750F(x2),RD350N,XR650R,CBR600F,CB250,KDX250,YZF750R,CRM250,400EXC,KLR650,TTR600RE,DR350S,R100GSPD,RGV250,VMAX1200,DL650,KZ750 Present:G650XC,C12,CRF450X,1190ADV

TGR · Crazy Courier Joined: 10 Sep 2006 Karma :

@ tatters

Thank you for the correction Thumbs Up

changed the thread title to reflect the issue Smile

@ salty21

Thank you Smile

____________________
1991 Kawasaki ZXR400L - 1999 Suzuki GS500E - 1990 Kawasaki ZX750R H2 - 1991 Honda CBR 600 - 2015 Skyteam Monkey 125