Newish can :D

[-Savage-]

Well folks, just won a carbon fiber can off E-gay for the CBR, £33. It has the link pipe and all fittings, bit scuffed, but I'm happy like.

The thing is though it's stamped "not for road use". I know I can polish this off no problem, but I'm guessing its going to be loud. So say I was to go for MOT with this can, is there anyway I could improvise temporary baffles, like putting a load of wire wool into it or something to kill the noise a bit?

I can't wait to get it, seller hasn't got his address registered on E-bay though, so I have to wait for him to send me his details.

Tee hee. Link here
____________________
My Bikes - - - Royal Enfield 500 with sidecar, VFR800, CBR600FX,
Peugeot Speedfight 100, Kymco Hipster 125, GSXR750K5, Jawa TS 350

[Bardeey]

The noise won't make them fail it... It's the stamp that they will take note of!
____________________
:: P Speedfight 49cc => Gilera DNA 124cc => Suzuki Bandit GSF V 400cc ::
:: CBT=Passed 07/08/05 :: Theory=Passed 31/05/07 :: Practical= Passed 02/08/07::

[teampots]

most places will be ok with the can as long as you remove the stamp (do a good job of it mind) unless you get a really strict tester.
____________________
Current - Fazer 600
Prev - Bandit x2 (Killed) CB400 (Superfour) CBR125
Currently Restoring - Kawasaki S1 250 Triple (Slowly but surely)

[hmmmnz]

this is what i use on my very loud stubby can
https://cgi.ebay.co.uk/BSAU-Rivet-Band-for-Road-Legal-Race-Can_W0QQitemZ110132454143QQihZ001QQcategoryZ25623QQrdZ1QQssPageNameZWD1VQQcmdZViewItem
all you do is drill out the old rivets put the new srap in place and rivet it back together
10 min job
____________________
the humans are dead
I kick arse for the lord
Wiring Diagrams BIDNIP it bitches

[teampots]

or maybe one of these

Long Ebay Link



Long Ebay Link2



Long Ebay Link3
____________________
Current - Fazer 600
Prev - Bandit x2 (Killed) CB400 (Superfour) CBR125
Currently Restoring - Kawasaki S1 250 Triple (Slowly but surely)

[owdamer]

Just polish it out. its pointless paying money for a bs stamp. You dont need one.

[geordiecbrblo...]

Ta-da

https://search.ebay.co.uk/search/search.dll?from=R40&_trksid=m37&satitle=db+killer

Definately worth buying for the MOT and easily removed afterwards!