Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


Am i going to need a new fuel tap?

Reply to topic
Bike Chat Forums Index -> The Workshop
View previous topic : View next topic  
Author Message

AzzA1990
Nova Slayer



Joined: 28 Apr 2014
Karma :

PostPosted: 00:17 - 28 Nov 2015    Post subject: Am i going to need a new fuel tap? Reply with quote

Hi guys

Went to pull the tank off my little RXS100 today and as i gave the fuel pipe a little tug the brass nipple that the fuel line goes onto actually came out of the fuel tap! i went to place it back in and it's just very wobbly it doesn't go back in tightly, the brass nipple when it came out had a plastic type seal over it that was mangled i couldn't save it, what do you guys think? easier to get a new after-market tap? I've attached a photo that hopefully you'll be able to see Smile[img][/img]
 Back to top
View user's profile Send private message You must be logged in to rate posts

Suntan Sid
World Chat Champion



Joined: 07 May 2009
Karma :

PostPosted: 01:08 - 28 Nov 2015    Post subject: Reply with quote

If the nipple was sealed and held in place with a plastic type O-ring, then surely replacing the O-ring will fix the problem!
I'd be trying that before buying a new tap.

If a new O-ring doesn't fix it, as an absolute last resort, you could glue it back in place, with plastic metal.
____________________
"Everybody needs money, that's why they call it money!" Cool
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Noxious89123
World Chat Champion



Joined: 10 Jun 2007
Karma :

PostPosted: 01:34 - 28 Nov 2015    Post subject: Reply with quote

Looks like it has a groove for an o-ring, but I should hope it's held in by more than just friction!

Is it missing an internal circlip from the body of the tap?
____________________
'06 Honda CBR125RW-6 ~ '00 Honda CBR600F-Y ~ '07 Honda CBR600RR-7 ~ Bikeless Sad
'53 Ford Ka 1.3 ~ '03 Vauxhall Astra SRi 1.8 ~ '52 Vauxhall Astra SRi 2.2 ~ '53 Vauxhall Astra GSi
 Back to top
View user's profile Send private message You must be logged in to rate posts

Pete.
Super Spammer



Joined: 22 Aug 2006
Karma :

PostPosted: 09:46 - 28 Nov 2015    Post subject: Reply with quote

I have done that before. They are just glued in so either buy some fuel-safe loctite or believe it or not it's a perfect job for JB Weld, which is 100% fuel resistant once fully cured.
____________________
a.k.a 'Geri'

132.9mph off and walked away. Gear is good, gear is good, gear is very very good Very Happy
 Back to top
View user's profile Send private message Visit poster's website You must be logged in to rate posts

redeem ouzzer
World Chat Champion



Joined: 06 Oct 2015
Karma :

PostPosted: 10:14 - 28 Nov 2015    Post subject: Reply with quote

Pete. wrote:
I have done that before. They are just glued in so either buy some fuel-safe loctite or believe it or not it's a perfect job for JB Weld, which is 100% fuel resistant once fully cured.


^^this

I had one pull out on a twin exit 350 tap and used a good quality industrial epoxy to put it back in, never had an issue.
 Back to top
View user's profile Send private message You must be logged in to rate posts

AzzA1990
Nova Slayer



Joined: 28 Apr 2014
Karma :

PostPosted: 10:31 - 28 Nov 2015    Post subject: Reply with quote

Thanks for the replies! i am going to have a proper look at it today whilst i have the time and see what i can do
 Back to top
View user's profile Send private message You must be logged in to rate posts

MCN
Super Spammer



Joined: 22 Jul 2015
Karma :

PostPosted: 11:01 - 28 Nov 2015    Post subject: Reply with quote

Don't hold your camera/phone as close to the subject. The lens cannot focus properly. You can probably see where some of the background is in focus but the area in question is blurred. So there is little useful detail suitable for inspection.
____________________
Disclaimer: The comments above may be predicted text and not necessarily the opinion of MCN.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Ariel Badger
Super Spammer



Joined: 02 Dec 2006
Karma :

PostPosted: 11:17 - 28 Nov 2015    Post subject: Reply with quote

I know the film for a digital camera can be expensive but if the first picture does not work take a second one please.
____________________
Bikers make great organ donors, get 115 on your licence today.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts
Old Thread Alert!

The last post was made 10 years, 301 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> The Workshop All times are GMT + 1 Hour
Page 1 of 1

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 

Debug Mode: ON - Server: birks (www) - Page Generation Time: 0.10 Sec - Server Load: 1.76 - MySQL Queries: 14 - Page Size: 57.04 Kb