Help & FAQs    Search BCF    Members    Groups    Events Calendar
Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


please help

 Reply to topic
Bike Chat Forums Index -> The Workshop
View previous topic : View next topic  
Author Message

Karl Bird
Borekit Bruiser



Joined: 03 Sep 2008
Karma :
PostPosted: 18:47 - 07 Dec 2008    Post subject: please help Reply with quote
I have recently bought a Suzuki xf650 freewind and have noticed after adjusting the chain when it's on the center stand and then checking it again when sitting on the bike it's very loose does this mean I should tighen the rear shock.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

LeeR
World Chat Champion



Joined: 12 Dec 2006
Karma :
PostPosted: 18:55 - 07 Dec 2008    Post subject: Reply with quote
I wouldn't have thought so, it sounds right to me that when you take it off the centre-stand that the chain remains or goes lack.
You wouldn't want the chain to tighten up in the normal driven position as it'd cause too much stress and stretch it, maybe damage the drive shaft bearings, and worse case scenario snap.

If you've followed Suzuki's instructions it should be fine, it may just look wrong.
____________________
My claim to fame: Austin Vince nicked my pen...
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Karl Bird
Borekit Bruiser



Joined: 03 Sep 2008
Karma :
PostPosted: 18:57 - 07 Dec 2008    Post subject: Reply with quote
It' just I don't know what setting the shock is on and i'm a bit of a porker
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

ZRX61
Victor Meldrew



Joined: 05 Nov 2003
Karma :
PostPosted: 19:00 - 07 Dec 2008    Post subject: Reply with quote
LeeR wrote:
You wouldn't want the chain to tighten up in the normal driven position as it'd cause too much stress and stretch it, maybe damage the drive shaft bearings, and ....

It doesn't have a drive shaft if it's chain drive, you doofus. I know what you're refering to, but that isn't the name of it.. Wink
 Back to top
View user's profile Send private message You must be logged in to rate posts

Karl Bird
Borekit Bruiser



Joined: 03 Sep 2008
Karma :
PostPosted: 19:04 - 07 Dec 2008    Post subject: Reply with quote
er what sorry I never mentioned a shaft all i'm saying is if i adust the shock then maybe the chain wont slacken so much because swinging arm will have moved less.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

LeeR
World Chat Champion



Joined: 12 Dec 2006
Karma :
PostPosted: 19:18 - 07 Dec 2008    Post subject: Reply with quote
I'm refering to the shaft that comes out of the engine/gearbox assembly that the front sprocket is mounted to, too much tension here will cause the shaft to turn eccentrically and eventually shag the bearings it's supported by.

I know it's not a "shaft drive" and having owned one I'm in a position to know, forgive my lack of technically precise language. Rolling Eyes
____________________
My claim to fame: Austin Vince nicked my pen...
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

LeeR
World Chat Champion



Joined: 12 Dec 2006
Karma :
PostPosted: 19:26 - 07 Dec 2008    Post subject: Reply with quote
Funnily enough the Suzuki manual describes it as the driveshaft...

https://i217.photobucket.com/albums/cc162/lrogers_album/driveshaft.jpg
____________________
My claim to fame: Austin Vince nicked my pen...
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

LeeR
World Chat Champion



Joined: 12 Dec 2006
Karma :
PostPosted: 19:29 - 07 Dec 2008    Post subject: Reply with quote
Karl Bird wrote:
It' just I don't know what setting the shock is on and i'm a bit of a porker


Best thing I felt with mine (as it's quite a soft set-up) was to wind it up to the maximum setting and then take it back 2 turns. This'll be good enough for road riding, if you take a pillion or top-box then take it up a turn or stick it on maximum, if you intend to go off-road wind it down a turn or two (4 turns off max). Thumbs Up
____________________
My claim to fame: Austin Vince nicked my pen...
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts
Old Thread Alert!

The last post was made 17 years, 303 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> The Workshop All times are GMT + 1 Hour
Page 1 of 1

 
 You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 
Debug Mode: ON - Server: birks (www) - Page Generation Time: 0.07 Sec - Server Load: 0.85 - MySQL Queries: 14 - Page Size: 56.54 Kb