project time

[rusty_bawz]

I'm looking for a project bike just to fluff around with.

what would be the easiest bikes to work on as i'm not the best at the old spannering cause I want to try as much myself as possible
____________________
www.scottishbikerforum.myfreeforum.org
come in and say hello

[MaybeGuy]

something 2 stroke...

im going to be selling a mito 125 engine pretty soon, let me know if you're interested.
____________________
Blue_SV650S wrote: it was a sh1te wheelie, but it proves that he can get it up in 3rd and can do angles. In summery, mattsprattuk is a gobby little sh1tebag, dopehead tw4t, but sadly for all of us, he probably isn't THAT full of sh1te!!
Kickstart wrote: Hi I tend to agree with Matt. All the best Keith

[ms51ves3]

Yamaha FS1
Yamaha RX-S100
Yamaha YB100
Yamaha RS100
Yamaha RS125

All pretty simple to work on.

Personally, I'd go for the FS1 due to the vast amount of spare parts you can find.

[MaybeGuy]

saying that... how much would you be willing to pay for an RXS100 ''tidy up'' project?

recent tax and MOT etc.
____________________
Blue_SV650S wrote: it was a sh1te wheelie, but it proves that he can get it up in 3rd and can do angles. In summery, mattsprattuk is a gobby little sh1tebag, dopehead tw4t, but sadly for all of us, he probably isn't THAT full of sh1te!!
Kickstart wrote: Hi I tend to agree with Matt. All the best Keith

[Ichy]

Most bikes made between early '80s and 90's are easy enough to work on, basically anything with carbs.

CB250, GS500-650 can be had cheap and its still fairly easy to get parts for them. An early GSX600f could be had for a couple of hundred with loads of cheap spares on Ebay.

To be honest the list is endless, its all down to how much do you want to pay, whats available, and the availability of spares.
____________________
https://www.metacafe.com/watch/1972097/how_to_behave_on_a_forum/