how do you know if an exhaust fits your bike?

[clancy]

i have a Rieju RS2 50. been wanting to change the exaust but i have no idea what fits or is compatible? and help would be appreciated.
____________________
KLX 300r

[lonner]

[clancy]

yeah but unfortunately i cant find any made for my bike online.
well theres a few i can find online, but nothing that really appeals to me.

is there any particular places i should have a look ?

or a way to know if an exhaust would fit ?

any help appreciated.
leigh.
____________________
KLX 300r

[Blue_SV650S]

One thing you should keep in mind is that a 2-stroke (yours is a 2-stroke right?) is very heavily reliant on the length and shape of the exhaust.

Basically the exhausts are 'matched' to the porting etc of the bike, sling one on from a totally different design bike and realistically at best it'll run rough, at worst it'll run lean and you will blow it up!!

You'd have to be really lucky to find one from a random donor that just so happens to work properly with your motor (not fit - WORK) and that will actually increase power etc and not reduce it (which I assume you are after?).

In short, you are stuck with buying one for your bike or taking a massive gamble on if it will work. Its not just if it will fit, its if it will match your bikes tuning!

So if you can't get a zorst for your bike, then just knock the baffles out and ride it round until you can get a different/bigger bike!!
____________________
The purpose of life is to fight maturity.

[clancy]

yeah it is a 2-stroke.
yeah i didnt want to sink £150 odd on a exhaust if it weren't gonna work. but because its some chinese make theres not a lot in the way off "upgrades" so to speak on the internet.

im not to bothered about it bumping up the power or anything. just want it to finish off the look of the bike, because the stock one is rather crappy looking.

but obviously i dont want the power to suffer from buying one that wont work properly.

would it be worth asking in a garage if they could have a look and tell me what exhausts would work etc?

thanks for your help, leigh.
____________________
KLX 300r

[Blue_SV650S]

[clancy]

im not sure if its chinese or japanese. i know it has the same engine as an aprillia rs50 if thats any help ?
yeah ive found a nice can and im not to fussed about changing the whole system, so yeah that could be an option.

is there a chance it might fuck the can up though, i dont want to mess up a £150 can :S

leigh.
____________________
KLX 300r

[Blue_SV650S]

[clancy]

ok, so if i look for rs50 exhausts i should have more luck ?
and if i play it on the safe side and took it to a garage, surely theyd weld it properly yeah?
leigh.
____________________
KLX 300r

[Blue_SV650S]

[Blue_SV650S]

Just looked up what one looks like (in a big pic)

I think they look well cool for a 50 ... also I actually quite like the stock end silencer thingy!! ... it is a bit 'droopy' mind ... perhaps just get them to weld it at a different angle?


https://www.bikez.com/pictures/rieju/2006/23184_0_1_2_rs2%20pro%20matrix_Image%20credits%20-%20Rieju.jpg
____________________
The purpose of life is to fight maturity.

[clancy]

okeydoke.
thanks for the help mate. much appreciated
____________________
KLX 300r

[clancy]

[tutton]

Peugeot XR6 Exhaust (Very similar to your bike if i remember right your bike is a copy of the pug )
Peugot XPS exhaust (Uses rs50 engine i used to have one )
Motorhispania furia exhaust (Same as the xps different make model)

Have a squint at some of them.
____________________
Past: '05 Peugeot XPS '99 Aprillia RS125 '94 FZR600R
Current: '02 ZX636 A1P '51 CCM R30

[clancy]

yeah ill have a look, cheers
____________________
KLX 300r