Carb Set Up

[Hutchysrs50]

Sooooooooooo

my bikes been running fine apart from a little slow around 4-5k revs (i put the video on last time)

so i took your advice, moved the needle hight up 1, and it was better for a while, unless iv been out for a long time, then its a little wierd again?

so iv moved it up one more spot (its now on the middle grove) i started the bike and it seems fine, idle was higher than usual, so i unscrewed it about 1 and 1/2 turns and its happy around 900 - 1100, but what i want to know is, what do i do with the air mixture screw, im on the understanding that you need to change them both, not just one, so in short...

needle moved down a notch ( the clip moved up to the middle)
idle screw turned out 1 1/2 turns

what do i do with the air screw

Thanks
____________________
Gilera SC 125 - Current

[Hutchysrs50]

awhh come on!

iv took all the fairings off, the headlights off, sprayed the headlights, let them dry, put them back on the bike, put the nosecone and right hand fairing back on, and still nothing?

one of you must know how to set up a carb.
____________________
Gilera SC 125 - Current

[spitfire123]

[Hutchysrs50]