Hornet Rad Cover

[That_Hornet]

My radiator cover vibrates horibly when im on the bike.

Not loose bolts its in the middle at the bottom that had no support and vibrates, making loads of noises.

Any help?

[hellobaby]

You would probably be better off asking on the Hornets Nest, anyway are you sure its not just loose bolts, Torque everything up around the area of the noise and see if it makes a difference.
____________________
CBT - 10/05/08, Theory 7/05/08

[JakeyR]

or just take it off cos radiator covers scream "IM GAY"

[alun111]

[JakeyR]

yeah okay they serve a purpose because i got a stone through my rad, they look okay unless its a gash design, if its just a bog stock design without writing all over it i like um! lol.

[carlperkins00...]

i had that trouble too...
but the holes in my radiator cover were abit big for the bolt.
so i bought 4 little rubber gromits and drilled the holes in the radiator bigger, put the gromits in, loctite on the bolt and put it together. worked fine.

it must be the bolts, unless the rad cover is really thin and flimsy??

[That_Hornet]

It's beowolf cover. It's 2mm thick. I'll take it off tonight and get some grommets. Thanks