Help & FAQs    Search BCF    Members    Groups    Events Calendar
Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


Err... how can you have an 'inline' single?!?

 Reply to topic
Bike Chat Forums Index -> General Bike Chat
View previous topic : View next topic  
Author Message

Teflon-Mike
tl;dr



Joined: 01 Jun 2010
Karma :
PostPosted: 06:50 - 25 Oct 2010    Post subject: Err... how can you have an 'inline' single?!? Reply with quote
Just followed this link on the '125's will take you anywhere!' thread.
multijoy wrote:
Honda actually designed the CG125 on the basis that it would be thrashed to within an inch of its life, whilst carrying its own weight again, plus family.
Honda's spiel on the design/history

All about the History of the Honda CG125. Quite interesting but THIS bit got me wondering.
HONDA wrote:
That same night, Inagaki drew up a concept for a lightweight, OHV inline single-cylinder engine with a short pushrod; an idea much like the one he had thought of on the flight home to Japan.

____________________
My Webby'Tef's-tQ, loads of stuff about my bikes, my Land-Rovers, and the stuff I do with them!
Current Bikes:'Honda VF1000F' ;'CB750F2N' ;'CB125TD ( 6 3 of em!)'; 'Montesa Cota 248'. Learner FAQ's:= 'U want to Ride a Motorbike! Where Do U start?'
 Back to top
View user's profile Send private message Visit poster's website You must be logged in to rate posts

Frost
World Chat Champion



Joined: 26 May 2004
Karma :
PostPosted: 08:42 - 25 Oct 2010    Post subject: Reply with quote
Probably just means the conventional vertical cylinder transverse engine.

https://www.motorbase.com/uploads/candc/2009/07/03/fs_779044.jpg
As opposed to honda's highly successful horizontal cylinder transverse.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Kickstart
The Oracle



Joined: 04 Feb 2002
Karma :
PostPosted: 09:13 - 25 Oct 2010    Post subject: Reply with quote
Hi

I would think of an inline single as one with the crank in line (ie, pointing at the wheels) rather than having the crank across the frame.

An example would be the old BMW singles.

All the best

Keith
____________________
Traxpics, track day and racing photographs - Bimota Forum - Bike performance / thrust graphs for choosing gearing
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

ollieholt
World Chat Champion



Joined: 09 Apr 2010
Karma :
PostPosted: 12:55 - 25 Oct 2010    Post subject: Reply with quote
i agree with the post above. think it just means sat in the frame and following the wheels of the bike with the crank. a transverse honda cg would be something to behold...
____________________
Laughing < This? Well this is just a day brightner.
 Back to top
View user's profile Send private message You must be logged in to rate posts

Frost
World Chat Champion



Joined: 26 May 2004
Karma :
PostPosted: 18:14 - 25 Oct 2010    Post subject: Reply with quote
Kickstart wrote:
I would think of an inline single as one with the crank in line (ie, pointing at the wheels) rather than having the crank across the frame.


That would be a longitudinal engine like old cars, and piston engined aircraft were. The link posted is discussing the CG, so it means a transverse engine, which is what the CG is. Longitudinal engines only make sense for multi cylinder engines like a boxer or MotoGuzzi
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Kickstart
The Oracle



Joined: 04 Feb 2002
Karma :
PostPosted: 18:29 - 25 Oct 2010    Post subject: Reply with quote
Hi

In line I have heard as meaning longitudinal. Just like transverse and across the frame are used interchangeably.

There have been longitudinal singles. Makes perfect sense if you use shaft drive.

All the best

Keith
____________________
Traxpics, track day and racing photographs - Bimota Forum - Bike performance / thrust graphs for choosing gearing
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts
Old Thread Alert!

The last post was made 15 years, 326 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> General Bike Chat All times are GMT + 1 Hour
Page 1 of 1

 
 You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 
Debug Mode: ON - Server: birks (www) - Page Generation Time: 0.06 Sec - Server Load: 0.94 - MySQL Queries: 14 - Page Size: 51.13 Kb