clutch not working

[U_W v2.0]

so my clutch isnt working.

tightened up the cable at the hand lever no effect

moved the clutch arm on the engine casing all the way to the right with absolutely no effect what so ever.

so im going to remove the engine casing tomorow and have a look.

any ideas what i should be looking for?
____________________
BCF's biggest cunt list: Cansa, Pits, Rob

[Blau Zedong]

Oh Dillifag....


So much fail.
____________________
18:54:48 Rob Fzs: jews don't give away stuff for free

18:54:59 Rob Fzs: unless its their clothes/ hair/ golden teeth

[U_W v2.0]

how bout posting something helpful here?

further information:

the bike is up on its center stand, so the wheel spins off the ground.

the wheel speed increases when accelerator is rolled so im led to believe the clutch isnt working properly.
____________________
BCF's biggest cunt list: Cansa, Pits, Rob

[Blau Zedong]

[U_W v2.0]

completely unlreated and unhelpful to the thread.

there fore, SPAM, like your above post is abusive and will be rated as such.

back on topic please. need help with the clutch
____________________
BCF's biggest cunt list: Cansa, Pits, Rob

[P.addy]

[U_W v2.0]

sorry, yeah while holding the clutch in.

but i just made some more adjustments and it seems to be working just fine.

now i need to adjust the cable again so i got the movement in the handle lever
____________________
BCF's biggest cunt list: Cansa, Pits, Rob

[P.addy]

Also...it should spin in neutral.

Put it this way, if you sit on it and put it in 1st and release the lever totally and go nowhere...there is an issue.

If you release and it stalls, its fine.

Don't go by what happens on the centre stand.

[U_W v2.0]