Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


Tubeless tyre fix

Reply to topic
Bike Chat Forums Index -> The Workshop
View previous topic : View next topic  
Author Message

Ollyswing
L Plate Warrior



Joined: 16 Jun 2012
Karma :

PostPosted: 22:08 - 16 Jun 2012    Post subject: Tubeless tyre fix Reply with quote

Hi all! Sorry if I don't get some rules right straight away, I'm a newby. I'm looking for advice as it suggests in the heading. I have a honda s-wing with tubeless tires of which the rear one have a nail (or nail like object) stuck in it. The tyre apart from this is a healthy michellin one with good thread with couple thousand miles in it. After researching online i found a product which can plug this hole but for that i have to take the nail out first. After playing about for a while trying to get it out I lost sight of the object. It kind of plugged the tyre because it keeps the air in unless i fiddle around the hole in which case I can hear it coming out again (the air).. Could someone please advice regarding this issue? Can i carry out the "plugging in" while the nail is inside? I'd really apprechiate some help! Thank you very much!
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

stocksmenace
Scooby Slapper



Joined: 24 Apr 2012
Karma :

PostPosted: 23:35 - 16 Jun 2012    Post subject: Reply with quote

personally i say get it out ....
____________________
Triumph Sprint 900..Prev-ZZR600-Derbi terra-Mz251-Hyo Aquila
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

map
Mr Calendar



Joined: 14 Jun 2004
Karma :

PostPosted: 00:53 - 17 Jun 2012    Post subject: Reply with quote

Two options.
1.
Get one of the BMW style puncture repair kit where you put/screw a plug in the outside of the tyre to fit the leak. You first make the hole bigger first - see instructions. Do it correctly this time

or, if you've messed up the repair then

2.
Replace the tyre.

IIRC the new Honda S-Wing* - assuming this is what you have is a scooter. So no big money for rubber. If you can remove the wheel yourself and take to tyre shop it's not that expensive to get fitted to loose wheel.

HTH Thumbs Up


* hopefully not confusing this to the Silverwing which is a scooter or going back in time was actually the name Honda put on a motorcycle.
____________________
...and the whirlwind is in the thorn trees, it's hard for thee to kick against the pricks...
Gibbs, what did Duckie look like when he was younger? Very Happy
 Back to top
View user's profile Send private message Send e-mail Visit poster's website You must be logged in to rate posts

reckless_b
Trackday Trickster



Joined: 22 Feb 2009
Karma :

PostPosted: 16:28 - 17 Jun 2012    Post subject: Reply with quote

take it in for a repair , national tyres do a great service on loose wheels, or buy a "stop and go" diy plugging kit, m and p stock them, although these are only supposed to be a get you home fix, the plug can be fitted with the wheel still in place
____________________
40 years on the road on and sometimes off bikes with a very recent OFF
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

kestrel
Nearly there...



Joined: 04 Sep 2006
Karma :

PostPosted: 16:53 - 17 Jun 2012    Post subject: Reply with quote

reckless_b wrote:
take it in for a repair , national tyres do a great service on loose wheels,


^^^This

Take the wheel to your local tyre fitter and let him repair it. If the nail is in the treaded area it can be repaired, if it's in the side wall the tyre is fucked. National Tyres in my area charge £10 for a puncture repair on a loose wheel, or a fiver for the tea money if they aren't too busy.
____________________
Isle of Man.........Road Racing Capital Of The World
 Back to top
View user's profile Send private message You must be logged in to rate posts

Ollyswing
L Plate Warrior



Joined: 16 Jun 2012
Karma :

PostPosted: 23:46 - 17 Jun 2012    Post subject: Reply with quote

Thank you for quick reply. I ended up riding it to a workshop that's open on Sunday and had it replaced. It was 64 quid but at least it's done.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts
Old Thread Alert!

The last post was made 14 years, 101 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> The Workshop All times are GMT + 1 Hour
Page 1 of 1

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 

Debug Mode: ON - Server: birks (www) - Page Generation Time: 0.06 Sec - Server Load: 0.73 - MySQL Queries: 14 - Page Size: 48.42 Kb