Help & FAQs    Search BCF    Members    Groups    Events Calendar
Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


Reasonable price to fit chain and sprockets?

 Reply to topic
Bike Chat Forums Index -> General Bike Chat
View previous topic : View next topic  
Author Message

TimNorwich
Traffic Copper



Joined: 07 Apr 2008
Karma :
PostPosted: 19:01 - 07 Aug 2012    Post subject: Reasonable price to fit chain and sprockets? Reply with quote
I purchased a DID C&S kit for my Hornet off eBay with the hope my friend would fit it, turns out he can't and I'm wondering what a reasonable price to have a garage fit it would be?

Thank you
____________________
Speedshite 50cc > Honda XR125L > Kawasaki GPZ 500 S > 02 Honda Hornet > 05 Honda CG125 winter hack > 04 Kawasaki ER-5 > 99 Honda Hornet 600 > Kawasaki GPZ 500 S > 99 Honda Hornet 600 > 05 Honda CBR600F > 01 Honda Hornet
 Back to top
View user's profile Send private message You must be logged in to rate posts

Nick_Giles
Could Be A Chat Bot



Joined: 01 Jan 2012
Karma :
PostPosted: 19:07 - 07 Aug 2012    Post subject: Reply with quote
I bet someone on this site close to you will fit it for you in exchange for beer or vino. Very Happy


Nick
____________________
Peter Cook: "I have learned from my mistakes, and I am sure I can repeat them exactly".
 Back to top
View user's profile Send private message Send e-mail Visit poster's website You must be logged in to rate posts

moppy
World Chat Champion



Joined: 25 Apr 2011
Karma :
PostPosted: 19:09 - 07 Aug 2012    Post subject: Reply with quote
My local garage in Leicester did it for £30. Find someone on the forum with an angle grinder and riveter and get them to show you how to do it for a few beers.
 Back to top
View user's profile Send private message You must be logged in to rate posts

TimNorwich
Traffic Copper



Joined: 07 Apr 2008
Karma :
PostPosted: 19:12 - 07 Aug 2012    Post subject: Reply with quote
I live in East Anglia, don't think theres many people on here local to be honest Crying or Very sad
____________________
Speedshite 50cc > Honda XR125L > Kawasaki GPZ 500 S > 02 Honda Hornet > 05 Honda CG125 winter hack > 04 Kawasaki ER-5 > 99 Honda Hornet 600 > Kawasaki GPZ 500 S > 99 Honda Hornet 600 > 05 Honda CBR600F > 01 Honda Hornet
 Back to top
View user's profile Send private message You must be logged in to rate posts

colicabcadam
Trackday Trickster



Joined: 26 Jun 2012
Karma :
PostPosted: 19:12 - 07 Aug 2012    Post subject: Reply with quote
it's the primary sprocket nut that can be a pain to get off... unless it has multiple nuts ?
____________________
my rides ---->> https://img406.imageshack.us/img406/5051/ktmaudiducati2.jpg
 Back to top
View user's profile Send private message You must be logged in to rate posts

pendulum
Traffic Copper



Joined: 13 Feb 2012
Karma :
PostPosted: 19:14 - 07 Aug 2012    Post subject: Reply with quote
Learn to doeth oneself, with help of YouTube and reading materials. If you get stuck or have questions, this place is very handy for helping you out Wink
____________________
1998 CG125 (Sold) CB500 [+ Clio 172]
Usually_Wrong: I tend to fail more than pass. [Speaking about Theory Practice]
Usually_Wrong: im on unemployment at the moment
 Back to top
View user's profile Send private message You must be logged in to rate posts

TimNorwich
Traffic Copper



Joined: 07 Apr 2008
Karma :
PostPosted: 19:44 - 07 Aug 2012    Post subject: Reply with quote
Is there any recommended guides for the job? I'm up for giving it a bash myself providing it's a job that's not easy to F up.
____________________
Speedshite 50cc > Honda XR125L > Kawasaki GPZ 500 S > 02 Honda Hornet > 05 Honda CG125 winter hack > 04 Kawasaki ER-5 > 99 Honda Hornet 600 > Kawasaki GPZ 500 S > 99 Honda Hornet 600 > 05 Honda CBR600F > 01 Honda Hornet
 Back to top
View user's profile Send private message You must be logged in to rate posts

Slacker24seve...
World Chat Champion



Joined: 10 May 2010
Karma :
PostPosted: 19:51 - 07 Aug 2012    Post subject: Reply with quote
colicabcadam wrote:
it's the primary sprocket nut that can be a pain to get off... unless it has multiple nuts ?


No it isn't, piece of piss on a Hornet. Have someone else stand on the back brake and use a breaker bar on it.

It is really, really easy. On a Hornet you don't even need to use a chain tool, all you have to do is remove the frame side plate where the swing arm bolt goes through. Remove the wheel and front sprocket and the chain just lifts out.

Put new sprockets on, join chain with a hammer and centre punch.

Job done

Laughing Laughing
____________________
Triumph Daytona 675 track bike + girlfriend's Honda Hornet 600
Selling a hack/winter bike for less than a grand? PM me.
Banger rallies are ace
 Back to top
View user's profile Send private message You must be logged in to rate posts

colicabcadam
Trackday Trickster



Joined: 26 Jun 2012
Karma :
PostPosted: 19:56 - 07 Aug 2012    Post subject: Reply with quote
i had no chance doing it on my ktm, maybe it has a higher torque rating
____________________
my rides ---->> https://img406.imageshack.us/img406/5051/ktmaudiducati2.jpg
 Back to top
View user's profile Send private message You must be logged in to rate posts

Pie-Roe
World Chat Champion



Joined: 05 Feb 2007
Karma :
PostPosted: 20:18 - 07 Aug 2012    Post subject: Reply with quote
I've done it on several different bikes. Generally seems people overtighten the front sprocket bolt. On SV650 I recently had I had to use a very large scaffold pole and two large friends.


HERE is how you do it without buying a riveter.

Quote:
If you don't have a chain riveter a size 8 spanner and a g clamp with a 4mm ball bearing will do exactly the same job for about 8 pounds.

Just put the spanner over the rivet coming through put gclamp over, tighten halfway, do over the next rivet, do halfway, repeat. Put ball bearing in middle of rivet and tighten with gclamp until it is riveted.

I've done this two or three times on bikes from 40hp to 150hp. It works just fine.

____________________
Previous: GSF600, FZR600 x2, ZXR750, XT600 Tenere, CB125, CZ125, ETZ 250, ER5, CCM R30, DRZ400, RF600x4, RF900x2, GS500, VTR1000F, 640 SMC, CB250 NIGHTHAWK, GT550x3, GPX750 TE610, CB500, X11x2, SV650, ZING 125, TL1000R,CB250 Superdream, CBR1100XX
 Back to top
View user's profile Send private message You must be logged in to rate posts

stonesie
World Chat Champion



Joined: 04 Jul 2010
Karma :
PostPosted: 20:37 - 07 Aug 2012    Post subject: Reply with quote
Do you have a car mechanic mate? If you do then he will have a impact gun, if hes a flash git it will be battery powered (mines air powered and I got a compressor for £30 off Ebay) these make the front sprocket nut a doddle, even when I left the bike in neutral Cool


You might also be able to get a cheap chain riveter from Hein Gericke Thumbs Up
 Back to top
View user's profile Send private message You must be logged in to rate posts

mfactor
Nova Slayer



Joined: 10 Jul 2012
Karma :
PostPosted: 09:37 - 08 Aug 2012    Post subject: Reply with quote
Pyro. wrote:
I've done it on several different bikes. Generally seems people overtighten the front sprocket bolt. On SV650 I recently had I had to use a very large scaffold pole and two large friends.


HERE is how you do it without buying a riveter.

Quote:
If you don't have a chain riveter a size 8 spanner and a g clamp with a 4mm ball bearing will do exactly the same job for about 8 pounds.

Just put the spanner over the rivet coming through put gclamp over, tighten halfway, do over the next rivet, do halfway, repeat. Put ball bearing in middle of rivet and tighten with gclamp until it is riveted.

I've done this two or three times on bikes from 40hp to 150hp. It works just fine.



Cane also be done with a pair of mole grips and a 10mm nut to push the rivet thru then put a lump hammer behind the link and use a ball pein hammer to rivet the link
 Back to top
View user's profile Send private message You must be logged in to rate posts
Old Thread Alert!

The last post was made 13 years, 178 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> General Bike Chat All times are GMT
Page 1 of 1

 
 You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 
Debug Mode: ON - Server: birks (www) - Page Generation Time: 0.07 Sec - Server Load: 1.22 - MySQL Queries: 14 - Page Size: 73.79 Kb