Mot question regarding levers

[Pol Anorl]

I have adjustable clutch + front brake lever but the adjust from the brake lever is gone/non existant wasn't there when i got the bike.

Would this affect my mot?
____________________
GOOD GAME BODYGUARD: https://i.imgur.com/8WePGgf.jpg
20:30:37 Pyro.: I don't sort of like men, I take every advantage to choke on dick.
Jewlio Iglesias: You live in Liverpool - Chances are, the front door has already been kicked off the hinges

[nowhere.elysium]

Provided it doesn't affect the actuation of the lever, I don't see why it should. As far as I can remember, there's nothing about lever reach adjustability mentioned in the MOT guidelines.
____________________
'10 SV650SF, '83 GS650GT (it lives!), Questionable DIY dash project, 3D Printer project, Lasercutter project

[Kickstart]

Hi

I would be a bit concerned about how much play there is in the lever with the reach adjuster missing.

All the best

Keith
____________________
Traxpics, track day and racing photographs - Bimota Forum - Bike performance / thrust graphs for choosing gearing

[Easter Bunny]

I guess if its adjusted correctly and without excess play it'd be ok
____________________
The light at the end of the tunnel is an oncoming train!

[Pol Anorl]

The lack of adjuster dosen't increase nor decrease the ammount of play it has as far as i can tell, ill look into getting it replaced.
____________________
GOOD GAME BODYGUARD: https://i.imgur.com/8WePGgf.jpg
20:30:37 Pyro.: I don't sort of like men, I take every advantage to choke on dick.
Jewlio Iglesias: You live in Liverpool - Chances are, the front door has already been kicked off the hinges

[Kickstart]

Hi

Ah, span adjuster between the main pivot part and the actual lever.

Suppose they might fail it on An insecure brake control or mounting.

All the best

Keith
____________________
Traxpics, track day and racing photographs - Bimota Forum - Bike performance / thrust graphs for choosing gearing