xj900 diversion - any straight swap for the brakes?

[c_dug]

I knackered my reservoir at the beginning of January, and today being pay day I would like to get it sorted.

The original reservoirs seem to be a bit like hens teeth so I'm wondering if there is an easy swap?
____________________
I am a bellend, I am a man of constant sorrow, I am a gummy bear, I am a rock.

[jjdugen]

I put EXUP 1000 calipers and master cyl on mine. You could (almost) bend the forks with those suckers! Calipers bolt straight on, dual piston instead of sliding pin type.
____________________
The CBR900RR has been sold. Aprilia Falco worms its way into my heart.
Try Soi 23 on Amazon for a good read.... Self promotion? Moi?

[chris-red]

If EXUP1000 callipers fit then so should R1 blue spots. Now they will bend the forks!
____________________
Well, you know what they say. If you want to save the world, you have to push a few old ladies down the stairs.
Skudd:- Perhaps she just thinks you are a window licker and is being nice just in case she becomes another Jill Dando.
WANTED:- Fujinon (Fuji) M42 (Screw on) lenses, let me know if you have anything.

[c_dug]

Found out through the divvy forum that bluespots do fit, not compatible with the divvy master though so need to find an easy swap for that.
____________________
I am a bellend, I am a man of constant sorrow, I am a gummy bear, I am a rock.

[temeluchus]

I suspect your OE master will work with blue spots. Worked fine on a fj1200 with its original master.

MandP sell pattern master cylinders that will work fine.
____________________
Some shite cruiser. Now with guns and FREEDOM!