Honda hornet 600 HT Lead order??

[Lynchasaurus]

Just got a hornet 600 and it came in bits and was wondering if anyone had a picture of what order the ht leads go in since everything's hanging out and nothing's numbered?

The ignition coils are still mounted to the frame so that's my only reference point unless there's a better way to figure this out?

Grateful for any positive advice, thanks

[P.]

Left ignition coil (closest to left footpeg) does 1 and 4, right hand does 2 and 3.

Just switch them round till it runs sweet.

[Lynchasaurus]

Thanks mate, ill give it a go.

It won't even start atm lol

[Lynchasaurus]

Where does this go? lol

[Nick_Giles]

[Casper]

[Nick_Giles]

.
What year Hornet is it.?

I 'think' I have a workshop manual in .pdf format on my PC at work. - Would a copy be of use to you.?


Nick
____________________
Peter Cook: "I have learned from my mistakes, and I am sure I can repeat them exactly".

[Lynchasaurus]

Well the vacuum pipe and fuel line are attached to the tank so don't think it's either of them lol Yea it could come in handy mate, thanks

[Lynchasaurus]

*2001 Hornet

[Nick_Giles]

[Lynchasaurus]

Yea that's no problem, thanks alot

[GrumpyGuts]

That looks like the crankcase breather tube. It goes on the top left hand side of the air box.

If not, could it be the fuel tank breather tube? Where does the other end go? If it is not attached to anything but runs down towards the ground, it must be the fuel tank breather hose. (<<< This is my betting...seems the correct size to be this. Breather port is on the right hand side)

If not, it could also be the sub air cleaner tube. That end should connect to the sub air cleaner:

https://i48.tinypic.com/nyvaq9.jpg
____________________
My Bikes: Lifan Beat 125cc '11 -> Suzuki B120P '76 -> Suzuki EN 125-2A '08 -> Honda CG 125 '04 -> Honda CB600F Hornet '98 -> Kawasaki ZZR 600 '99 -> Kawasaki GPZ 500S '95 (Current)
Theory test passed - 09/02/2012 >>>> Module 1 passed 24/07/2012 >>>> Module 2 passed 24/10/2012

[Casper]

[MarkJ]

Looks too small for the crankcase breater to me, looks more like the fuel tank breather/overflow to me, or possibly the tube that links the radiator to the coolant tank.

If you follow the tube, where does it lead to? If it is the fuel tank breather it should route down the RHS unto the round 'hook' on the RHS bracket that holds the swingarm on the frame.

[Nick_Giles]