Help & FAQs    Search BCF    Members    Groups    Events Calendar
Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


Stupid newbie question

 Reply to topic
Bike Chat Forums Index -> The Workshop
View previous topic : View next topic  
Author Message

Rob1970
Nova Slayer



Joined: 13 Dec 2012
Karma :
PostPosted: 15:45 - 25 Mar 2013    Post subject: Stupid newbie question Reply with quote
When people are removing rear wheel/adjusting chain etc do they use a socket, ring spanner or torque wrench to undo and do up the axle bolts

Reason i ask is that i've used the little stubby ring spanners in my toolkit but they are obviosuly hard work and I don't have anything 27mm or 22mm in my tool kit so need to buy a workshop tool to do the job
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

G
The Voice of Reason



Joined: 02 Feb 2002
Karma :
PostPosted: 15:48 - 25 Mar 2013    Post subject: Re: Stupid newbie question Reply with quote
Rob1970 wrote:
When people are removing rear wheel/adjusting chain etc do they use a socket, ring spanner or torque wrench to undo and do up the axle bolts

Yes, I do use those.

Smile

I'd probably use a socket on normal ratchet - however very occasionally have used an torque wrench.
Probably have a ring spanner the other side.

If ring spanner's are to hand, I'll may use them on both sides.

Oh and to be pedantic - it's generally referred to as a spindle rather than an axle Smile.
 Back to top
View user's profile Send private message You must be logged in to rate posts

Rob1970
Nova Slayer



Joined: 13 Dec 2012
Karma :
PostPosted: 15:58 - 25 Mar 2013    Post subject: Reply with quote
Ok - I'll get a big hefty ring spanner then and guess the torque!
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

CarlosCBR
World Chat Champion



Joined: 12 Mar 2010
Karma :
PostPosted: 16:02 - 25 Mar 2013    Post subject: Reply with quote
I normally use a ring spanner one side and a socket/wrench on the nut side, then torque wrench when doing it back up again.
____________________
https://www.youtube.com/watch?v=1OPv5mDPQ14

https://www.facebook.com/carl.simmonds.7
 Back to top
View user's profile Send private message Send e-mail Visit poster's website You must be logged in to rate posts

G
The Voice of Reason



Joined: 02 Feb 2002
Karma :
PostPosted: 16:03 - 25 Mar 2013    Post subject: Reply with quote
If you're on a budget and buying a spanner, I'd recommend this set:
www.ebay.co.uk/itm/120946134532
Compared to the cost of a single spanner, much better value and should cover 'much everyhing on a bike.

I have got the above spanner set and am happy with it. I haven't got the below socket set, but have had a similar one and again happy with it:
www.ebay.co.uk/itm/190682579772
Note that the extension bar can be used as a t-bar 1/2" wrench, meaning you can use your 27mm and 22mm at the same time.
 Back to top
View user's profile Send private message You must be logged in to rate posts

Islander
World Chat Champion



Joined: 05 Aug 2012
Karma :
PostPosted: 16:08 - 25 Mar 2013    Post subject: Reply with quote
Rob1970 wrote:
Ok - I'll get a big hefty ring spanner then and guess the torque!


You're unlikely to shear the spindle or strip the thread that way so go for it - it needs to be tight!
 Back to top
View user's profile Send private message You must be logged in to rate posts

Walloper
Super Spammer



Joined: 24 Feb 2005
Karma :
PostPosted: 16:37 - 25 Mar 2013    Post subject: Reply with quote
Rob1970 wrote:
Ok - I'll get a big hefty ring spanner then and guess the torque!


To Guess Motorcycle Axle/Spindle Torque: Tighten nuts until the axle breaks then back it off 1/3 of a turn.

Jest ^^^
____________________
W-ireless A-rtificial L-ifeform L-imited to O-bservation P-eacekeeping and E-fficient R-epair
 Back to top
View user's profile Send private message You must be logged in to rate posts
Old Thread Alert!

The last post was made 13 years, 237 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> The Workshop All times are GMT
Page 1 of 1

 
 You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 
Debug Mode: ON - Server: biskey (www) - Page Generation Time: 0.04 Sec - Server Load: 0.37 - MySQL Queries: 14 - Page Size: 53.03 Kb