All 4 indicators stopped working

[Bandit6]

No green light on board for indicating, relay is making click, front light is ok, tail one ok. Fuse I put new spare, but it was not necessery. Can it be relay even its clicking sound.

At beggining there was very light green light on board visible, but now not green light showing indicators.

its honda Anf 125, thanks for advice

[Polarbear]

Yes, the relay can still click even if it isn't making the contacts properly.

If neither left or right are working and the bulbs are ok it has to be part of the common circuit.

https://img5.imageshack.us/img5/7839/indicator.jpg

So really can only be supply (fuse) relay or switch (very unlikely). Do you have a multimeter? You can get really cheap ones that will save you pounds diagnosing what is wrong rather than buying each bit and changing it to find the fault.
____________________
Triumph Trophy Launch Edition

[Bandit6]

Firstly, thank you for your time reading and writing your point. It must be that flasher (ignition relay) or switcher on handlebar. I have already ordered new relay. I couldnt find it, finally I found it, its stuck under front board. I dont want go to garage, its not so big deal not to be able to do it myself, even I am not so technicall type.

I know its some simple stuff and belief that its matter of couple of minutes for handly man in garages, but I got feeling they sometime just doing big things from piece of cake.

[Bandit6]

[smegballs]

[Bandit6]