Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


Front brake still binding after service

Reply to topic
Bike Chat Forums Index -> The Workshop
View previous topic : View next topic  
Author Message

Baffler186
World Chat Champion



Joined: 31 May 2013
Karma :

PostPosted: 15:32 - 05 Mar 2014    Post subject: Front brake still binding after service Reply with quote

Mk1 bandit 600 - the brakes were binding and last time it was in the garage (200 miles ago) they were apparently serviced, but now they are binding again. Just wondered if this means that either they weren't serviced properly or that the discs are warped? They seem to be rubbing uniformly so thought maybe they are not warped.

Also, how do you tell if the discs are worn (i.e. too worn and need to be replaced)? What are the symptoms?

thanks,
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Rogerborg
nimbA



Joined: 26 Oct 2010
Karma :

PostPosted: 15:35 - 05 Mar 2014    Post subject: Reply with quote

What exactly did they "service"? If they just gave the exposed pistons a quick blast of brake cleaner that won't have fixed swollen seals.
____________________
Biking is 1/20th as dangerous as horse riding.
GONE: HN125-8, LF-250B, GPz 305, GPZ 500S, Burgman 400 // RIDING: F650GS (800 twin), Royal Enfield Bullet Electra 500 AVL, Ninja 250R because racebike
 Back to top
View user's profile Send private message You must be logged in to rate posts

P.addy
Red Rocket



Joined: 14 Feb 2008
Karma :

PostPosted: 15:38 - 05 Mar 2014    Post subject: Reply with quote

How are they "binding" is it first thing in the morning?
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts
_Iain_ This post is not being displayed because the poster is banned. Unhide this post / all posts.
- This post is not being displayed because the poster has bad karma. Unhide this post / all posts.

Busa1340R
Nova Slayer



Joined: 18 Feb 2014
Karma :

PostPosted: 17:12 - 05 Mar 2014    Post subject: Reply with quote

If you have fairly old rubber brake hoses they can perish from the inside. Small pieces of rubber then block the return passage of brake fluid and subsequently don't allow the caliper pistons to return fully.

This is particulary prevalent when the hoses have been clamped for some reason (such as removing caliper for overhaul)
____________________
Current: 2010 Suzuki GSX1340R Hayabusa, 2013 Yamaha YP250R X-Max Sport - Previous: Triumph Sprint ST1050ABS, Honda XL600V Transalp, Honda NT650V Dullsville (don't ask!), Kawasaki ZX9R E1, Honda NX650 Dominator, Suzuki GSX1300RKZ Hayabusa, Honda CBR1000FM, Kawasaki GPZ500S, etc etc
 Back to top
View user's profile Send private message You must be logged in to rate posts

Baffler186
World Chat Champion



Joined: 31 May 2013
Karma :

PostPosted: 06:42 - 06 Mar 2014    Post subject: Reply with quote

Break levers are stock and old. They are binding quite badly i.e makes it hard to push, they are the same cold as they are after miles of riding. Not sure how they were serviced bjt judging by the other work this particular garage carried out I'm not certain it was done properly. Will check disc specs against new, and see what they are like.

Cheers
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Benjums
Scooby Slapper



Joined: 12 Jun 2012
Karma :

PostPosted: 07:05 - 06 Mar 2014    Post subject: Reply with quote

Morning baffler I've just had to order pads and calliper rebuild kits for my bandit as the brakes were binding on mine as well. If you have to order rebuild kits then here is the link to the ones I have ordered, 150733049798 don't know what the quality is like on them yet as only ordered them last night, but they were one of the cheaper ones I could find after a lot of looking.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Rogerborg
nimbA



Joined: 26 Oct 2010
Karma :

PostPosted: 08:41 - 06 Mar 2014    Post subject: Reply with quote

Well, calipers off, pads out, have a look at the pistons. If they're grimed up, give them a clean. That's 15 minutes and you'll know where you stand.
____________________
Biking is 1/20th as dangerous as horse riding.
GONE: HN125-8, LF-250B, GPz 305, GPZ 500S, Burgman 400 // RIDING: F650GS (800 twin), Royal Enfield Bullet Electra 500 AVL, Ninja 250R because racebike
 Back to top
View user's profile Send private message You must be logged in to rate posts

Fizzer Thou
World Chat Champion



Joined: 06 Aug 2011
Karma :

PostPosted: 09:50 - 06 Mar 2014    Post subject: Reply with quote

If you were charged for work to be carried out and the brakes are binding after only 200 miles then return to the shop.

There is nothing I hate more than a shop charging for work that was not carried out.
____________________
Just talk bikes.What else is there?

Always have a 'Plan B'
 Back to top
View user's profile Send private message You must be logged in to rate posts

Rogerborg
nimbA



Joined: 26 Oct 2010
Karma :

PostPosted: 10:23 - 06 Mar 2014    Post subject: Reply with quote

To what end? If OP didn't pay for a rebuild, he won't have got a rebuild.
____________________
Biking is 1/20th as dangerous as horse riding.
GONE: HN125-8, LF-250B, GPz 305, GPZ 500S, Burgman 400 // RIDING: F650GS (800 twin), Royal Enfield Bullet Electra 500 AVL, Ninja 250R because racebike
 Back to top
View user's profile Send private message You must be logged in to rate posts

Baffler186
World Chat Champion



Joined: 31 May 2013
Karma :

PostPosted: 16:28 - 06 Mar 2014    Post subject: Reply with quote

Rogerborg wrote:
Well, calipers off, pads out, have a look at the pistons. If they're grimed up, give them a clean. That's 15 minutes and you'll know where you stand.


ok will do. I just assumed that the chap servicing them would have told me if they looked knackered. He gave me a list of everything else that looked worn and then told me to get rid of the bike as soon as I could.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Baffler186
World Chat Champion



Joined: 31 May 2013
Karma :

PostPosted: 16:29 - 06 Mar 2014    Post subject: Reply with quote

Benjums wrote:
Morning baffler I've just had to order pads and calliper rebuild kits for my bandit as the brakes were binding on mine as well. If you have to order rebuild kits then here is the link to the ones I have ordered, 150733049798 don't know what the quality is like on them yet as only ordered them last night, but they were one of the cheaper ones I could find after a lot of looking.


thanks - could you re-post the link as I just see numbers Confused
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Minty
World Chat Champion



Joined: 23 Dec 2005
Karma :

PostPosted: 16:47 - 06 Mar 2014    Post subject: Reply with quote

Search for those numbers in eBay - they are the the listing reference numbers. Thumbs Up
____________________
My fingers smell of your mum.
 Back to top
View user's profile Send private message You must be logged in to rate posts

Rogerborg
nimbA



Joined: 26 Oct 2010
Karma :

PostPosted: 17:59 - 06 Mar 2014    Post subject: Reply with quote

Baffler186 wrote:
He gave me a list of everything else that looked worn and then told me to get rid of the bike as soon as I could.

Sounds like a plan.

I'm completely onboard with the issue of dodgy mechanics not doing work properly, but there's also the consideration that if you put a bike in and say "Fix it mister" then they might be doing you a favour by getting it rolling again and then offering advice as above.
____________________
Biking is 1/20th as dangerous as horse riding.
GONE: HN125-8, LF-250B, GPz 305, GPZ 500S, Burgman 400 // RIDING: F650GS (800 twin), Royal Enfield Bullet Electra 500 AVL, Ninja 250R because racebike
 Back to top
View user's profile Send private message You must be logged in to rate posts

bikertomm
World Chat Champion



Joined: 03 Jul 2010
Karma :

PostPosted: 18:04 - 06 Mar 2014    Post subject: Reply with quote

If you do start having a go yourself and are unsure, make sure you check 'delboys garage' on youtube out.

The blokes an actual legend - really helpful videos of maintenance, it's all on a bandit too!

https://www.youtube.com/watch?v=7LtlhEg1eys

There's also ones of him taking the caliper apart / cleaning ect.

He explains in good detail too Thumbs Up
____________________
07' Honda Hornet now full powaah! My guide on performing an oil change!
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts
Old Thread Alert!

The last post was made 12 years, 259 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> The Workshop All times are GMT
Page 1 of 1

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 

Debug Mode: ON - Server: biskey (www) - Page Generation Time: 0.07 Sec - Server Load: 1.25 - MySQL Queries: 14 - Page Size: 92.47 Kb