 znetkid L Plate Warrior
Joined: 01 Mar 2014 Karma :  
|
|
 simonjb Nova Slayer

Joined: 04 May 2013 Karma :  
|
 Posted: 17:43 - 06 Mar 2014 Post subject: |
 |
|
If there might be a circuit fault, I recommend checking behind the headlight, a connector may simply have come loose. If you have a haynes manual, page 8-14 onwards is where you need to look to find the removal of the instrument cluster and how to replace the bulbs.
To check the wiring, for the YBR (at least the older ones - I presume it's the same) you need to take off the beam unit (the main headlight) by the 2 small screws on the sides of the front chrome part (not the large bolts that hold the whole thing, just the front part). Check all the wiring behind there, specifically the connectors from the instrument cluster, as they come in through the back of the headlight casing.
If you cannot find a problem, you'll need to take off the instrument cluster, take the back off and pull out the bulb holders. I'll post the pages from the haynes manual if you need them. ____________________ Current Bike: 2008 Yamaha YBR 125 |
|