 Queeg500 L Plate Warrior

Joined: 07 Nov 2013 Karma :  
|
 Posted: 13:33 - 21 Apr 2014 Post subject: Suzuki DR 125SM not turning over. These wires to blame?[pic] |
 |
|
My bike is a Suzuki DR 125 sm k9, recently the engine would no longer turn over, the FI light came on and the error code suggested a problem with the ignition, upon inspecting the ignition I found some wires had been damaged, I've just repaired those.
The battery (few months old) has been on a trickle charger for a few days since the bike developed the initial fault, upon reinstalling it I noticed the wires pictured below. When I try to start the bike now I no longer get the FI warning light but the bike wont turn over, I've no reason to believe the battery is faulty, lights look bright as ever, instrument cluster is working and as far as I can test it with a multimeter it seems ok. I've checked all the obvious, kill switch etc.
I accidentally touched wires 1 and 2 and the bike turned over as strong as it should, wire 3 runs straight into the bike and 4 + 5 look like earth wires. I'm guessing this is where the fault lies as the battery fell out and snagged on its wires when I removed it, so that has probably pulled these wires apart (?).
Cheers!
https://s21.postimg.org/pwo4kn52f/wires.jpg |
|
 Queeg500 L Plate Warrior

Joined: 07 Nov 2013 Karma :  
|
|