Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


AM6 engine damage advice??? Furia 50cc

Reply to topic
Bike Chat Forums Index -> The Workshop
View previous topic : View next topic  
Author Message

Dan Moto
Derestricted Danger



Joined: 15 Apr 2014
Karma :

PostPosted: 13:43 - 21 Apr 2014    Post subject: AM6 engine damage advice??? Furia 50cc Reply with quote

Posted this in my project part but no replies, come to take the engine out of the bike and noticed there is some damage to the casings. Obviously the cases need replacing but should I just buy a replacement engine an go from there it the am6 50cc.

https://www.bikechatforums.com/files/image_159.jpg

https://www.bikechatforums.com/files/image_162.jpg
____________________
Life's Short Have Fun, Grab The Bull By the Horns And Give It A Shake.
Never Say Never... As It Might Just Happen, If It To Good To Be True It Probably Is.
Wake Up And Smell The Coffee, If It Ain't Broke Don't Fix It As then It Will Be.
 Back to top
View user's profile Send private message You must be logged in to rate posts

The Artist
Super Spammer



Joined: 06 Jan 2008
Karma :

PostPosted: 13:50 - 21 Apr 2014    Post subject: Reply with quote

The first pic is standard damage on AM6.

The 2nd is a bit unusual. Not really sure, do you have more pictures from the area?
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Dan Moto
Derestricted Danger



Joined: 15 Apr 2014
Karma :

PostPosted: 13:57 - 21 Apr 2014    Post subject: Reply with quote

The Artist wrote:
The first pic is standard damage on AM6.

The 2nd is a bit unusual. Not really sure, do you have more pictures from the area?


Will take one now.
____________________
Life's Short Have Fun, Grab The Bull By the Horns And Give It A Shake.
Never Say Never... As It Might Just Happen, If It To Good To Be True It Probably Is.
Wake Up And Smell The Coffee, If It Ain't Broke Don't Fix It As then It Will Be.
 Back to top
View user's profile Send private message You must be logged in to rate posts

Dan Moto
Derestricted Danger



Joined: 15 Apr 2014
Karma :

PostPosted: 14:06 - 21 Apr 2014    Post subject: Reply with quote

Thanks for the reply here's the pics.
https://www.bikechatforums.com/files/image_402.jpg

https://www.bikechatforums.com/files/image_808.jpg

It's near the kick start on the case.
____________________
Life's Short Have Fun, Grab The Bull By the Horns And Give It A Shake.
Never Say Never... As It Might Just Happen, If It To Good To Be True It Probably Is.
Wake Up And Smell The Coffee, If It Ain't Broke Don't Fix It As then It Will Be.
 Back to top
View user's profile Send private message You must be logged in to rate posts

The Artist
Super Spammer



Joined: 06 Jan 2008
Karma :

PostPosted: 14:27 - 21 Apr 2014    Post subject: Reply with quote

It is possible the kick starter gear has come off. Behind the input shaft, there is a gear mechanism and it looks like it has kicked outwards.

I would take the covers off and inspect. It isn't necessarily structurally important IIRC.

Also, that bolt in the top looks like a bodge job which isn't a good sign. It means someone has had a go at fixing something and not done it properly so there could be other hidden issues.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Dan Moto
Derestricted Danger



Joined: 15 Apr 2014
Karma :

PostPosted: 14:33 - 21 Apr 2014    Post subject: Reply with quote

The Artist wrote:
It is possible the kick starter gear has come off. Behind the input shaft, there is a gear mechanism and it looks like it has kicked outwards.

I would take the covers off and inspect. It isn't necessarily structurally important IIRC.


Ok thank you for the reply. I will take the covers off and inspect the cause I will post pics of my findings. also I am a a bit fussy and this bothers me so some cases or another engine will be purchased will probably strip this one for spare parts parts.
____________________
Life's Short Have Fun, Grab The Bull By the Horns And Give It A Shake.
Never Say Never... As It Might Just Happen, If It To Good To Be True It Probably Is.
Wake Up And Smell The Coffee, If It Ain't Broke Don't Fix It As then It Will Be.
 Back to top
View user's profile Send private message You must be logged in to rate posts

Dan Moto
Derestricted Danger



Joined: 15 Apr 2014
Karma :

PostPosted: 15:09 - 21 Apr 2014    Post subject: Reply with quote

Ok so removed the cover an find no gasket and the damage in the pics.
https://www.bikechatforums.com/files/image_168.jpg
https://www.bikechatforums.com/files/image_204.jpg
https://www.bikechatforums.com/files/image_485.jpg
Clearly a bodge job not sure what other horrors I'm going to find.
____________________
Life's Short Have Fun, Grab The Bull By the Horns And Give It A Shake.
Never Say Never... As It Might Just Happen, If It To Good To Be True It Probably Is.
Wake Up And Smell The Coffee, If It Ain't Broke Don't Fix It As then It Will Be.
 Back to top
View user's profile Send private message You must be logged in to rate posts

The Artist
Super Spammer



Joined: 06 Jan 2008
Karma :

PostPosted: 16:10 - 21 Apr 2014    Post subject: Reply with quote

That oversized bolt may well have caused the kickstart issue.

I would look around for a spare AM6 engine with solid casings.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Dan Moto
Derestricted Danger



Joined: 15 Apr 2014
Karma :

PostPosted: 16:55 - 21 Apr 2014    Post subject: Reply with quote

The Artist wrote:
That oversized bolt may well have caused the kickstart issue.

I would look around for a spare AM6 engine with solid casings.


Was on the bay while typing watching a few at the mo. also are they easy to rebuild as it's my first project build thank for the replies and advice it much appreciated.
____________________
Life's Short Have Fun, Grab The Bull By the Horns And Give It A Shake.
Never Say Never... As It Might Just Happen, If It To Good To Be True It Probably Is.
Wake Up And Smell The Coffee, If It Ain't Broke Don't Fix It As then It Will Be.
 Back to top
View user's profile Send private message You must be logged in to rate posts

hmmmnz
Super Spammer



Joined: 22 Aug 2006
Karma :

PostPosted: 18:10 - 21 Apr 2014    Post subject: Reply with quote

yeah id be looking for another engine, and keeping that one as spares,
it looks repairable, but probably not economically so
____________________
the humans are dead
I kick arse for the lord
Wiring Diagrams BIDNIP it bitches
 Back to top
View user's profile Send private message You must be logged in to rate posts

Dan Moto
Derestricted Danger



Joined: 15 Apr 2014
Karma :

PostPosted: 19:36 - 21 Apr 2014    Post subject: Reply with quote

hmmmnz wrote:
yeah id be looking for another engine, and keeping that one as spares,
it looks repairable, but probably not economically so


Watching one on the bay it says running but won't select first gear, so if won was going to make a good one from both using a naraku piston set and crank shaft and naraku seals and other new bits if needed. But I will practice tacking it part and putting it back together never done owt like this before.
____________________
Life's Short Have Fun, Grab The Bull By the Horns And Give It A Shake.
Never Say Never... As It Might Just Happen, If It To Good To Be True It Probably Is.
Wake Up And Smell The Coffee, If It Ain't Broke Don't Fix It As then It Will Be.
 Back to top
View user's profile Send private message You must be logged in to rate posts

The Artist
Super Spammer



Joined: 06 Jan 2008
Karma :

PostPosted: 19:56 - 21 Apr 2014    Post subject: Reply with quote

They are pretty simple and a lot of people know them inside out so any issues, post pics and as much description as possible and someone will know.

If you plan on using this bike long term, expect a top end rebuild in 10k miles give or take depending on how you use it.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Dan Moto
Derestricted Danger



Joined: 15 Apr 2014
Karma :

PostPosted: 20:54 - 21 Apr 2014    Post subject: Reply with quote

The Artist wrote:
They are pretty simple and a lot of people know them inside out so any issues, post pics and as much description as possible and someone will know.

If you plan on using this bike long term, expect a top end rebuild in 10k miles give or take depending on how you use it.


Thanks it gives you piece of mind to know there's people with knowledge that are willing to help. And yeah I remember someone said top end rebuild every 10k or so.
____________________
Life's Short Have Fun, Grab The Bull By the Horns And Give It A Shake.
Never Say Never... As It Might Just Happen, If It To Good To Be True It Probably Is.
Wake Up And Smell The Coffee, If It Ain't Broke Don't Fix It As then It Will Be.
 Back to top
View user's profile Send private message You must be logged in to rate posts
Old Thread Alert!

The last post was made 12 years, 213 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> The Workshop All times are GMT
Page 1 of 1

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 

Debug Mode: ON - Server: biskey (www) - Page Generation Time: 0.08 Sec - Server Load: 0.34 - MySQL Queries: 14 - Page Size: 78.63 Kb