|
|
| Author |
Message |
| Darkstar82 |
This post is not being displayed .
|
 Darkstar82 Borekit Bruiser
Joined: 12 Jan 2013 Karma :     
|
 Posted: 12:14 - 28 Apr 2014 Post subject: clutch wont engage / disengage after rebuild. Help :( Rotax |
 |
|
Well, my rebuild of my AF1 Futura is complete, she looks lovely, you can pop her in to neutral and start her, no problem. She sits there and purrs, a testiment to my fine mechanical skills...
as long as you dont want to go anywhere.
Problem:
Starts in neutral and idles well, but, pull in clutch and step down a gear and the bike jolts, engine cuts. Its like starting the bike in gear even though the clutch feels firm.
Now, before I bolted the engine back up I checked the gears moved through their sequences and they do, 1 down, 5 up, .5 between 1st and second for neutral so I am praying to God above that I don't need to split my engine again to fix this.
Please help / give me hope.
Engine is two stroke, rotax 123,
Last edited by Darkstar82 on 14:48 - 28 Apr 2014; edited 1 time in total |
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| stirlinggaz |
This post is not being displayed .
|
 stirlinggaz World Chat Champion

Joined: 22 Jul 2007 Karma :    
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| Darkstar82 |
This post is not being displayed .
|
 Darkstar82 Borekit Bruiser
Joined: 12 Jan 2013 Karma :     
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| SQL |
This post is not being displayed .
|
 SQL World Chat Champion

Joined: 08 Aug 2012 Karma :   
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| Darkstar82 |
This post is not being displayed .
|
 Darkstar82 Borekit Bruiser
Joined: 12 Jan 2013 Karma :     
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| SQL |
This post is not being displayed .
|
 SQL World Chat Champion

Joined: 08 Aug 2012 Karma :   
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| thomp1983 |
This post is not being displayed .
|
 thomp1983 Crazy Courier

Joined: 05 Feb 2011 Karma :   
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| Kickstart |
This post is not being displayed .
|
 Kickstart The Oracle

Joined: 04 Feb 2002 Karma :     
|
 Posted: 19:11 - 28 Apr 2014 Post subject: |
 |
|
Hi
They quite often can do that if stood for a while. So first thing to check is that if you hold the brake on, give it a few revs (not that many, maybe 4k or so) and knock it into gear see if it frees the clutch off.
There is no cutout on the side stand. Indeed you can start the bike in gear with the stand down (not recommended).
However after that I would suggest the clutch adjustment. The adjuster at the lever is of little importance compared to the one under the clutch cover. Slacken the adjuster at the lever. Undo the cover in the middle of the clutch cover. Undo the locknut in there and undo the screw in the middle a bit. then lightly tighten it until you feel resistance (ie, when it starts to push against the clutch springs), then back it off half a turn or so. Then hold the adjuster steady and tighten up the lock nut. Replace the cover and then adjust at the lever to suit yourself.
Failing that you have probably got something wrong in assembling the clutch.
All the best
Keith ____________________ Traxpics, track day and racing photographs - Bimota Forum - Bike performance / thrust graphs for choosing gearing |
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| andy_uk |
This post is not being displayed .
|
 andy_uk World Chat Champion

Joined: 13 Aug 2011 Karma :   
|
 Posted: 20:48 - 28 Apr 2014 Post subject: |
 |
|
| Kickstart wrote: | Hi
They quite often can do that if stood for a while. So first thing to check is that if you hold the brake on, give it a few revs (not that many, maybe 4k or so) and knock it into gear see if it frees the clutch off. |
+1 to this!
While your engine was in bits, how did you store the clutch?
If it was stored 'dry' then there's a good chance that the plates have bonded.
if Keith's remedy doesn't work, then you may need to take the clutch basket out again. (drain oil, remove side panel - no engine split required)
Once it's out, dismantle it, soak the plates in oil overnight, re-assemble & refit. From what I can remember, there isn't a ball bearing that can easily come out (although mine's a Rotax122, so it could be different). ____________________ Aprilia Classic 125, GS500E, ER5-A1, ER5-C4, ER6 & an XJ6 project frame... |
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| Darkstar82 |
This post is not being displayed .
|
 Darkstar82 Borekit Bruiser
Joined: 12 Jan 2013 Karma :     
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| andy_uk |
This post is not being displayed .
|
 andy_uk World Chat Champion

Joined: 13 Aug 2011 Karma :   
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
Old Thread Alert!
The last post was made 12 years, 203 days ago. Instead of replying here, would creating a new thread be more useful? |
 |
|
|