Help & FAQs    Search BCF    Members    Groups    Events Calendar
Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


Thoughts on noisy Zed?

 Reply to topic
Bike Chat Forums Index -> The Workshop
View previous topic : View next topic  
Author Message

mentalboy
World Chat Champion



Joined: 05 May 2012
Karma :
PostPosted: 21:18 - 02 Nov 2014    Post subject: Thoughts on noisy Zed? Reply with quote
My old workhorse, '94 ZZR1100 D2, 45K, appears to have developed a new noise that I'm finding hard to pin down. Not plugging something in my ears whilst I ride does mean that I can pick up on nasty noises developing rather than when they become terminal or affect performance, so we aren't talking about a proper racket!

The air intake systems on these are always noisy and it sounds like a more magnified version of that, like a whirring sound but coming from what sounds like the top end. I'm away from the workshop for a while and lacking in tools so my diagnostics are limited to 'oh shit, I hope it gets me back to Devon'! Wink

It's more noticeable at idle (but that could be because the air intakes are noisier at higher revs and road noise doesn't help). No problems running, everything else seems normal.

Things it's not:
CCT
Valves
Piston slap
Exhaust headers
Big ends
Little ends
Rings
Low oil/coolant/lack of servicing
Also sounds as though it's too high up the lump for the dreaded clutch/ starter chain tensioner problem that these beasts suffer from

The only thing I can think is that the Camshaft /bearers have had a disagreement. Does anyone know if the Zed 1100's are prone to dry camshafts? I can't find anything by trawling google, etc.

Thoughts anyone?
____________________
Make mine a Corona.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts
Vincent This post is not being displayed because the poster is banned. Unhide this post / all posts.

mentalboy
World Chat Champion



Joined: 05 May 2012
Karma :
PostPosted: 21:35 - 02 Nov 2014    Post subject: Reply with quote
Vincent wrote:
Try a DIY stethoscope to localise the noise? 'May give you a better idea.

Works for me ..........usually.


Ta, may I draw your attention to line 4 Wink
____________________
Make mine a Corona.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

temeluchus
World Chat Champion



Joined: 01 Oct 2008
Karma :
PostPosted: 21:39 - 02 Nov 2014    Post subject: Reply with quote
That era of Kawasaki are known for lunching their cams.
____________________
Some shite cruiser. Now with guns and FREEDOM!
 Back to top
View user's profile Send private message Visit poster's website You must be logged in to rate posts
Vincent This post is not being displayed because the poster is banned. Unhide this post / all posts.

mentalboy
World Chat Champion



Joined: 05 May 2012
Karma :
PostPosted: 00:43 - 03 Nov 2014    Post subject: Reply with quote
Vincent wrote:

.............that's why I said "DIY" . gotta be sommat lying about - kitchen implement maybe? A knife steel Idea

Improvisation is key when tool-less Thumbs Up


Very true, although access is somewhat limited by the bodywork. If the weather brightens up a bit I'll probably find a strip of something in my brother's 'workshop' to use.


temeluchus wrote:

That era of Kawasaki are known for lunching their cams.


I was aware of the problems with the early model 1200's and there are references on the net to slight pitting problems on the 1100 shafts.

Sounds like I'll have to get the tank off and have a better listen. Bit of a bugger if it's a bent shaft as these are shell-less types and bear directly on the head!!
____________________
Make mine a Corona.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

temeluchus
World Chat Champion



Joined: 01 Oct 2008
Karma :
PostPosted: 05:05 - 03 Nov 2014    Post subject: Reply with quote
It was an issue for a lot of bikes with that engine and related lumps.

The cams on my gpz1100s (zx11e) were replaced due to wear of the cam lobes, apparently Kawasaki were cheaping out on the hard chroming. The gpz 11 uses basically the same engine but with the older gpz900 style side draught head.
____________________
Some shite cruiser. Now with guns and FREEDOM!
 Back to top
View user's profile Send private message Visit poster's website You must be logged in to rate posts
Old Thread Alert!

The last post was made 11 years, 234 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> The Workshop All times are GMT + 1 Hour
Page 1 of 1

 
 You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 
Debug Mode: ON - Server: birks (www) - Page Generation Time: 0.14 Sec - Server Load: 2.76 - MySQL Queries: 14 - Page Size: 55.83 Kb