Help & FAQs    Search BCF    Members    Groups    Events Calendar
Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


choke lever trouble

 Reply to topic
Bike Chat Forums Index -> The Workshop
View previous topic : View next topic  
Author Message

karl1963
Two Stroke Sniffer



Joined: 22 Aug 2014
Karma :
PostPosted: 21:12 - 06 Nov 2014    Post subject: choke lever trouble Reply with quote
Hi does anyone know how to fix my choke lever which is connected directly to the carb but as soon as I let go it closes back off. Ive tried tightening the nut but that just makes it stiff to pull up. Thanks.
 Back to top
View user's profile Send private message You must be logged in to rate posts

Nash GT
World Chat Champion



Joined: 12 Sep 2014
Karma :
PostPosted: 21:32 - 06 Nov 2014    Post subject: Reply with quote
Is the cable lubricated ?
____________________
Suzuki GSF600N
 Back to top
View user's profile Send private message You must be logged in to rate posts

Nemo
Could Be A Chat Bot



Joined: 30 Apr 2010
Karma :
PostPosted: 21:34 - 06 Nov 2014    Post subject: Reply with quote
What bike is it? Some bikes are meant to do that, one of my old bikes (can't remember which) did the same.
____________________
Previously owned: Kawasaki KH125, Suzuki GP125, Suzuki GX 125, Honda CB125 TDC '83, Honda ntv 600, Kawasaki ER5, Kawasaki ZZR600, Aprilia RSV 1000 Mille
Now own: Ducati 848 evo
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

karl1963
Two Stroke Sniffer



Joined: 22 Aug 2014
Karma :
PostPosted: 21:39 - 06 Nov 2014    Post subject: Reply with quote
It doesn't have a cable it is connected directly to the carb. The bike is a 1988 Suzuki Dr 125.
 Back to top
View user's profile Send private message You must be logged in to rate posts

Nemo
Could Be A Chat Bot



Joined: 30 Apr 2010
Karma :
PostPosted: 22:04 - 06 Nov 2014    Post subject: Reply with quote
https://www.cmsnl.com/suzuki-dr125-1988-sj_model13161/partslist/FIG-08.html#results

Looking at that it's on a spring, so assume it's meant to.

Also they call it a "starter valve" on this, which makes it sound like you use that to start it, then use the throttle to warm it up.
____________________
Previously owned: Kawasaki KH125, Suzuki GP125, Suzuki GX 125, Honda CB125 TDC '83, Honda ntv 600, Kawasaki ER5, Kawasaki ZZR600, Aprilia RSV 1000 Mille
Now own: Ducati 848 evo
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

331X2
Crazy Courier



Joined: 10 Jul 2013
Karma :
PostPosted: 22:24 - 06 Nov 2014    Post subject: Reply with quote
Has the raised part near the mounting hole worn away or has the lever bent away? Looks like the lever springs sideways over part of the casting to hold it up.
 Back to top
View user's profile Send private message You must be logged in to rate posts

Nemo
Could Be A Chat Bot



Joined: 30 Apr 2010
Karma :
PostPosted: 22:34 - 06 Nov 2014    Post subject: Reply with quote
Lee Wright wrote:
Has the raised part near the mounting hole worn away or has the lever bent away? Looks like the lever springs sideways over part of the casting to hold it up.


I don't get what you're asking? There wouldn't be any sideways movement the way the lever is mounted.
____________________
Previously owned: Kawasaki KH125, Suzuki GP125, Suzuki GX 125, Honda CB125 TDC '83, Honda ntv 600, Kawasaki ER5, Kawasaki ZZR600, Aprilia RSV 1000 Mille
Now own: Ducati 848 evo
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

331X2
Crazy Courier



Joined: 10 Jul 2013
Karma :
PostPosted: 22:56 - 06 Nov 2014    Post subject: Reply with quote
Where bolt No 43 enters the main body of the carb, there is what looks like a raised part of the casting that the lever could ride up and over if it was under a little tension toward the body.

I'm only throwing ideas out there, although as I know nothing about that particular bike, it may never have held in the open position unaided Laughing
 Back to top
View user's profile Send private message You must be logged in to rate posts

YBR Ric
Spanner Monkey



Joined: 16 Jan 2012
Karma :
PostPosted: 10:15 - 07 Nov 2014    Post subject: Reply with quote
Bought one of those new in the eighties! brings back such bad memories...

It simply relies upon friction to hold the plunger shaft against the spring.

However if tightening the nut can increase friction to the point it's too stiff, try backing it off a little.

Failing that make a wedge to hold the button up and attach it with fishing line or similar to the body and just
pull it out of the way to let the plunger descend once the engine no longer needs the enrichening port open.
 Back to top
View user's profile Send private message You must be logged in to rate posts
Old Thread Alert!

The last post was made 11 years, 246 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> The Workshop All times are GMT + 1 Hour
Page 1 of 1

 
 You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 
Debug Mode: ON - Server: birks (www) - Page Generation Time: 0.07 Sec - Server Load: 3.67 - MySQL Queries: 14 - Page Size: 58.27 Kb