Help & FAQs    Search BCF    Members    Groups    Events Calendar
Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


Damper rod bolts - best way to remove?!

 Reply to topic
Bike Chat Forums Index -> The Workshop
View previous topic : View next topic  
Author Message

Dave M
Scooby Slapper



Joined: 03 May 2013
Karma :
PostPosted: 22:01 - 12 May 2015    Post subject: Damper rod bolts - best way to remove?! Reply with quote
Evening,

I'm changing fork seals and can't get damper rod bolts free? I've tried the broom stick down the stanchion but no joy, it just keeps spinning! I have an impact driver but hex piece isn't long enough. Any tips please? Thanks.

Last edited by Dave M on 22:30 - 12 May 2015; edited 1 time in total
 Back to top
View user's profile Send private message You must be logged in to rate posts

Raffles
World Chat Champion



Joined: 14 Apr 2009
Karma :
PostPosted: 22:15 - 12 May 2015    Post subject: Reply with quote
Either buy a long impact hexagon socket bit or just simply drill the head off the screw.
____________________
A good loser will always be a loser.
 Back to top
View user's profile Send private message You must be logged in to rate posts

lihp
World Chat Champion



Joined: 22 Sep 2010
Karma :
PostPosted: 23:23 - 12 May 2015    Post subject: Reply with quote
Are these upside down forks?

If not, and they're RWU, then you don't need to split the fork to change the seals. You can carefully screw a self tapper in each side of the seal and lift it out.
____________________
covent.gardens: lihp is my most favourite member ever
 Back to top
View user's profile Send private message You must be logged in to rate posts

Nemo
Could Be A Chat Bot



Joined: 30 Apr 2010
Karma :
PostPosted: 23:57 - 12 May 2015    Post subject: Reply with quote
Get a long hex socket, and next time wizz it loose with the fork still assembled.
____________________
Previously owned: Kawasaki KH125, Suzuki GP125, Suzuki GX 125, Honda CB125 TDC '83, Honda ntv 600, Kawasaki ER5, Kawasaki ZZR600, Aprilia RSV 1000 Mille
Now own: Ducati 848 evo
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

barrkel
World Chat Champion



Joined: 30 Jul 2012
Karma :
PostPosted: 00:00 - 13 May 2015    Post subject: Reply with quote
If you can't find a long enough hex bit (I couldn't), buy a cheap allen key of the correct size, slice the angle off it (I used a dremel), and use it in an impact socket of a matching size. Use it in combination with an impact wrench with enough juice. I've found cordless ones to be lacking in the juice department.

Also, your local friendly garage will probably do it for free if you ask nicely. I have done this also.
____________________
Bikes: S1000R, SH350; Exes: Vity 125, PS125, YBR125, ER6f, VFR800, Brutale 920, CB600F, SH300x4
Best road ever ridden: www.youtube.com/watch?v=s2MhNxUEYtQ
 Back to top
View user's profile Send private message You must be logged in to rate posts

Dave M
Scooby Slapper



Joined: 03 May 2013
Karma :
PostPosted: 01:20 - 13 May 2015    Post subject: Reply with quote
Nemo wrote:
Get a long hex socket, and next time wizz it loose with the fork still assembled.


Lesson learnt Thumbs Up
 Back to top
View user's profile Send private message You must be logged in to rate posts

Dave M
Scooby Slapper



Joined: 03 May 2013
Karma :
PostPosted: 01:21 - 13 May 2015    Post subject: Reply with quote
barrkel wrote:
If you can't find a long enough hex bit (I couldn't), buy a cheap allen key of the correct size, slice the angle off it (I used a dremel), and use it in an impact socket of a matching size. Use it in combination with an impact wrench with enough juice. I've found cordless ones to be lacking in the juice department.

Also, your local friendly garage will probably do it for free if you ask nicely. I have done this also.


Great idea. Will try that tomorrow. Thumbs Up
 Back to top
View user's profile Send private message You must be logged in to rate posts

Dave M
Scooby Slapper



Joined: 03 May 2013
Karma :
PostPosted: 01:23 - 13 May 2015    Post subject: Reply with quote
lihp wrote:
Are these upside down forks?

If not, and they're RWU, then you don't need to split the fork to change the seals. You can carefully screw a self tapper in each side of the seal and lift it out.


I was going to ask if that was possible! Thanks.
 Back to top
View user's profile Send private message You must be logged in to rate posts
Old Thread Alert!

The last post was made 11 years, 148 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> The Workshop All times are GMT + 1 Hour
Page 1 of 1

 
 You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 
Debug Mode: ON - Server: birks (www) - Page Generation Time: 0.06 Sec - Server Load: 0.58 - MySQL Queries: 14 - Page Size: 54.5 Kb