Help & FAQs    Search BCF    Members    Groups    Events Calendar
Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


GSXR 400 Restoration

 Reply to topic
Bike Chat Forums Index -> General Bike Chat
View previous topic : View next topic  
Author Message

MiniMan96
Derestricted Danger



Joined: 02 Mar 2016
Karma :
PostPosted: 13:05 - 02 Mar 2016    Post subject: GSXR 400 Restoration Reply with quote
Hey again dudes,

My second motorcycle is a GSXR400. I haven't done a single thing on this yet. I've had to store it at my dad's due to the lack of space at home (where my workshop is). I only bought this for £500 (absolute bargain) and there is barely anything wrong with the bike. It needs some work on the rear quarter panel and a few wear and tear scratches on the rest of the fairing. The forks need re-chroming which is the expensive job, but I think I might upgrade the springs in the forks so Ill have them apart which makes it a tad cheaper when I send them off. The carbs also need a good clean out as it had been stood for roughly 8 years, also has shocking tyres, discs and pads. But im thinking of a full restoration besides the engine. The engine has run so I just need to clean that up.

Im just grabbing the photos so Ill upload those as soon as I can.
____________________
Classic Mini, Land Rover Defender 90, Kawasaki GPZ550 Custom (Bought from Fladdem), Honda VFR400 NC24, Suzuki GSXR400 gk73a
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

MiniMan96
Derestricted Danger



Joined: 02 Mar 2016
Karma :
PostPosted: 13:22 - 02 Mar 2016    Post subject: Reply with quote
Here are the GSXR 400 photos. Luckily it was still on ebay in my list so I could download instead of wait 3 hours for my phone Mr. Green
____________________
Classic Mini, Land Rover Defender 90, Kawasaki GPZ550 Custom (Bought from Fladdem), Honda VFR400 NC24, Suzuki GSXR400 gk73a
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

redeem ouzzer
World Chat Champion



Joined: 06 Oct 2015
Karma :
PostPosted: 14:54 - 02 Mar 2016    Post subject: Reply with quote
Sell me the carbs, mirrors and CDI please.
____________________
Be a REAL MAN!
 Back to top
View user's profile Send private message You must be logged in to rate posts

Nope.
World Chat Champion



Joined: 16 Feb 2011
Karma :
PostPosted: 14:55 - 02 Mar 2016    Post subject: Reply with quote
Hi,

Welcome to BCF. It might be worth posting these kind of threads over in Show and Tell:

https://www.bikechatforums.com/viewforum.php?f=50

(Show off your projects or share your epic biking tales here.)

rather than General Bike Chat.

I like GSXR 400's and theres a fair few of us here who have owned them/own them so we may be able to answer any questions you have.
 Back to top
View user's profile Send private message Send e-mail Visit poster's website You must be logged in to rate posts

MiniMan96
Derestricted Danger



Joined: 02 Mar 2016
Karma :
PostPosted: 15:00 - 02 Mar 2016    Post subject: Reply with quote
Nope. wrote:
Hi,

Welcome to BCF. It might be worth posting these kind of threads over in Show and Tell:

https://www.bikechatforums.com/viewforum.php?f=50

(Show off your projects or share your epic biking tales here.)

rather than General Bike Chat.

I like GSXR 400's and theres a fair few of us here who have owned them/own them so we may be able to answer any questions you have.



Arhhh ok man, sweet cheers. Yeah im still getting the hang of this stuff. Yeah im looking forward to having it finished so I can ride it. Ill bare that in mind though Smile


And GT200Fan79 why would I sell the parts when I want to restore the bike?
____________________
Classic Mini, Land Rover Defender 90, Kawasaki GPZ550 Custom (Bought from Fladdem), Honda VFR400 NC24, Suzuki GSXR400 gk73a
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Rob Fzs
World Chat Champion



Joined: 07 Oct 2015
Karma :
PostPosted: 15:11 - 02 Mar 2016    Post subject: Reply with quote
i had one this time last year, but found the engine mount on the back had snapped off and so had the one on gt200 fans, so you might want to check that
____________________
'00 Aprilia RS50 > '92 Honda CG > '99 Yamaha Fazer > '91 Yamaha RXS > '79 Suzuki X5 > 01' Honda Cg > 07' Honda Cg > 82' Kawasaki Z200 > suzuki gsxr 400 gk73a > honda vfr 400 NC30> Yamaha RD350 YPVS F2 > Kawasaki ZZR 600 D1 > Yamaha TZR 250 2MA >Suzuki TL1000R > Yamaha TDR250 > Honda 929 blade > Suzuki SV1000 > Honda H100
Mod 2 Passed 09/06/2011
 Back to top
View user's profile Send private message You must be logged in to rate posts

redeem ouzzer
World Chat Champion



Joined: 06 Oct 2015
Karma :
PostPosted: 15:12 - 02 Mar 2016    Post subject: Reply with quote
MiniMan96 wrote:



And GT200Fan79 why would I sell the parts when I want to restore the bike?


Because my needs outweigh yours
____________________
Be a REAL MAN!
 Back to top
View user's profile Send private message You must be logged in to rate posts

MiniMan96
Derestricted Danger



Joined: 02 Mar 2016
Karma :
PostPosted: 15:20 - 02 Mar 2016    Post subject: Reply with quote
GT200Fan79 wrote:
MiniMan96 wrote:



And GT200Fan79 why would I sell the parts when I want to restore the bike?


Because my needs outweigh yours



Nahhh, Im keeping this Baby GSXR for myself to hoon about on Very Happy
____________________
Classic Mini, Land Rover Defender 90, Kawasaki GPZ550 Custom (Bought from Fladdem), Honda VFR400 NC24, Suzuki GSXR400 gk73a
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

bladeblaster
Trackday Trickster



Joined: 19 Jan 2015
Karma :
PostPosted: 15:20 - 02 Mar 2016    Post subject: Reply with quote
Nice, I have the SP version, its sat patiently waiting to be restored.

https://i491.photobucket.com/albums/rr279/bladeblaster/32yt43245y24y5_zps1a73627d.png
 Back to top
View user's profile Send private message You must be logged in to rate posts

MiniMan96
Derestricted Danger



Joined: 02 Mar 2016
Karma :
PostPosted: 15:22 - 02 Mar 2016    Post subject: Reply with quote
bladeblaster wrote:
Nice, I have the SP version, its sat patiently waiting to be restored.

https://i491.photobucket.com/albums/rr279/bladeblaster/32yt43245y24y5_zps1a73627d.png


Restored? Dude, that looks pretty mint. Whats up with her?
____________________
Classic Mini, Land Rover Defender 90, Kawasaki GPZ550 Custom (Bought from Fladdem), Honda VFR400 NC24, Suzuki GSXR400 gk73a
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

bladeblaster
Trackday Trickster



Joined: 19 Jan 2015
Karma :
PostPosted: 15:28 - 02 Mar 2016    Post subject: Reply with quote
MiniMan96 wrote:
bladeblaster wrote:
Nice, I have the SP version, its sat patiently waiting to be restored.

https://i491.photobucket.com/albums/rr279/bladeblaster/32yt43245y24y5_zps1a73627d.png


Restored? Dude, that looks pretty mint. Whats up with her?


body work is worse than looks in the picture, when I bought it a couple of years ago it had be stood for about 5 years, it ran but very badly, its now been stood for another 2 years.

Engine is sound, but will tidy it up and do valve clearances. Strip & rebuild carbs. New bearings & bushes on the swing arm & suspension. Fork strip & service. Damn good clean up, fresh paint.
 Back to top
View user's profile Send private message You must be logged in to rate posts

MiniMan96
Derestricted Danger



Joined: 02 Mar 2016
Karma :
PostPosted: 15:33 - 02 Mar 2016    Post subject: Reply with quote
bladeblaster wrote:
MiniMan96 wrote:
Restored? Dude, that looks pretty mint. Whats up with her?


body work is worse than looks in the picture, when I bought it a couple of years ago it had be stood for about 5 years, it ran but very badly, its now been stood for another 2 years.

Engine is sound, but will tidy it up and do valve clearances. Strip & rebuild carbs. New bearings & bushes on the swing arm & suspension. Fork strip & service. Damn good clean up, fresh paint.



That sounds very similar to mine to be honest. The paint looks better in the photos for me as well, but really its faded and scratched to hell. You'll have to keep me updated with yours when you start it man, that will be pretty awesome when finished. It looks gorgeous as it is if im honest.
____________________
Classic Mini, Land Rover Defender 90, Kawasaki GPZ550 Custom (Bought from Fladdem), Honda VFR400 NC24, Suzuki GSXR400 gk73a
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

redeem ouzzer
World Chat Champion



Joined: 06 Oct 2015
Karma :
PostPosted: 15:42 - 02 Mar 2016    Post subject: Reply with quote
bladeblaster wrote:
Nice, I have the SP version, its sat patiently waiting to be restored.

https://i491.photobucket.com/albums/rr279/bladeblaster/32yt43245y24y5_zps1a73627d.png


Sell me it or break it so you can sell me all the SP specific bits.
____________________
Be a REAL MAN!
 Back to top
View user's profile Send private message You must be logged in to rate posts

bladeblaster
Trackday Trickster



Joined: 19 Jan 2015
Karma :
PostPosted: 16:40 - 02 Mar 2016    Post subject: Reply with quote
MiniMan96 wrote:
You'll have to keep me updated with yours when you start it man, that will be pretty awesome when finished. It looks gorgeous as it is if im honest.


It will be all posted in the show and tell section.

GT200Fan79 wrote:
Sell me it or break it so you can sell me all the SP specific bits.


Thumbs Down
 Back to top
View user's profile Send private message You must be logged in to rate posts

Nope.
World Chat Champion



Joined: 16 Feb 2011
Karma :
PostPosted: 16:48 - 02 Mar 2016    Post subject: Reply with quote
GT200Fan79 wrote:
bladeblaster wrote:
Nice, I have the SP version, its sat patiently waiting to be restored.

https://i491.photobucket.com/albums/rr279/bladeblaster/32yt43245y24y5_zps1a73627d.png


Sell me it or break it so you can sell me all the SP specific bits.


Isn't that just the shock, subframe, tail piece, rear light and tank/belly pan graphics?

I've got an RRSP subframe with lights somewhere here if anybody wants to make me an offer for it.
 Back to top
View user's profile Send private message Send e-mail Visit poster's website You must be logged in to rate posts

bladeblaster
Trackday Trickster



Joined: 19 Jan 2015
Karma :
PostPosted: 17:02 - 02 Mar 2016    Post subject: Reply with quote
Nope. wrote:


Isn't that just the shock, subframe, tail piece, rear light and tank/belly pan graphics?

I've got an RRSP subframe with lights somewhere here if anybody wants to make me an offer for it.


Forks and gearbox, are different as well. Forks have rebound adjustment that the standard doesn't have, and it also has a close ratio gearbox.

Not sure about the carbs, I think they are different but I not 100% sure about that, maybe just the jets.
 Back to top
View user's profile Send private message You must be logged in to rate posts

redeem ouzzer
World Chat Champion



Joined: 06 Oct 2015
Karma :
PostPosted: 17:11 - 02 Mar 2016    Post subject: Reply with quote
Carbs are 1mm bigger and air box is longer so inlet tracts don't have the alloy spacers.

Best gains are made by fitting flat slide carbs and fitting a decent pipe, but my pockets aren't deep enough yet, I would expect 70 odd BHP easy by doing this.
____________________
Be a REAL MAN!
 Back to top
View user's profile Send private message You must be logged in to rate posts

redeem ouzzer
World Chat Champion



Joined: 06 Oct 2015
Karma :
PostPosted: 21:50 - 02 Mar 2016    Post subject: Reply with quote
Has OP checked his frame yet?
https://www.bikechatforums.com/viewtopic.php?t=299639&postdays=0&postorder=asc&start=0
____________________
Be a REAL MAN!
 Back to top
View user's profile Send private message You must be logged in to rate posts

MiniMan96
Derestricted Danger



Joined: 02 Mar 2016
Karma :
PostPosted: 09:00 - 03 Mar 2016    Post subject: Reply with quote
GT200Fan79 wrote:


Best gains are made by fitting flat slide carbs and fitting a decent pipe, but my pockets aren't deep enough yet, I would expect 70 odd BHP easy by doing this.




How much are flat slide carbs, and what carbs would fit the GSXR 400? Somebody has previously mentioned it at work but I didn't really look into it or anything because I had the VFR 400 on my mind at the time.
____________________
Classic Mini, Land Rover Defender 90, Kawasaki GPZ550 Custom (Bought from Fladdem), Honda VFR400 NC24, Suzuki GSXR400 gk73a
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

bladeblaster
Trackday Trickster



Joined: 19 Jan 2015
Karma :
PostPosted: 09:35 - 03 Mar 2016    Post subject: Reply with quote
GT200Fan79 wrote:
Carbs are 1mm bigger and air box is longer so inlet tracts don't have the alloy spacers.

Best gains are made by fitting flat slide carbs and fitting a decent pipe, but my pockets aren't deep enough yet, I would expect 70 odd BHP easy by doing this.


Yeah flatsides are on my list, it has a race can, but I may go for a full custom system
 Back to top
View user's profile Send private message You must be logged in to rate posts

redeem ouzzer
World Chat Champion



Joined: 06 Oct 2015
Karma :
PostPosted: 12:32 - 03 Mar 2016    Post subject: Reply with quote
Keihn TM / TMR32 are favourite, expensive and usually found for sale on Yahoo Japan auctions. You can probably buy them in the UK new but they would be 1000 quid and need racking to suit a 400.

Yoshimura have done two pipes, a quiet one and a full race system, both are better than stock. Yahoo japan again.
____________________
Be a REAL MAN!
 Back to top
View user's profile Send private message You must be logged in to rate posts
Old Thread Alert!

The last post was made 9 years, 326 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> General Bike Chat All times are GMT
Page 1 of 1

 
 You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 
Debug Mode: ON - Server: birks (www) - Page Generation Time: 0.08 Sec - Server Load: 1.03 - MySQL Queries: 14 - Page Size: 112.68 Kb