Honda cbr 125 2004 indicator

[Tsears133199]

Hi guys, having abit of trouble with my Honda cbr 125 2004, when I switch the indicators on, can usually take about 5-10 seconds to actually come on. But once they have been used a few time, that time gap drops abit say about 2-3 seconds. Just wondering if you guys could help me don't know whether it's dodgy wiring, relay or bad contacts any help would be appreciated thanks
____________________
Tommy

[Stalk]

Probably dirty contacts in the switch. Try spraying some contact cleaner in there, can be got from toolstation for about £3. Someone recently posted a similar thread and was answered with a very helpful post complete with pictures of how to clean the switch properly. You could try trawling back through old posts.

[Stalk]

Found it[url] https://www.bikechatforums.com/viewtopic.php?t=310903. [/url]
You will have to unhide Vincent's posts, read all of it first.

[Islander]

A quick fix is to push the switch to one side, squirt electrical contact cleaner into the slot and work the switch, then push it to the other side and do the same. You might have to do this a few times but it will work.

[Tsears133199]

Ahh you guys are all such legends thanks for being such a help! I'll try that now
____________________
Tommy