Help & FAQs    Search BCF    Members    Groups    Events Calendar
Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


NSR rear brake caliper swap

 Reply to topic
Bike Chat Forums Index -> The Workshop
View previous topic : View next topic  
Author Message

fully677
Nova Slayer



Joined: 25 Mar 2006
Karma :
PostPosted: 12:32 - 20 Oct 2016    Post subject: NSR rear brake caliper swap Reply with quote
Hi my bike has undergone lots of changes and now has upside down forks and was hoping to get a matching caliper for the back.

As it is I have a brembo on the front and wanted to get one on the back.

I was wondering if anyone knew of a brembo caliper that would fit on the existing mounting?

Thanks in Advance
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

G
The Voice of Reason



Joined: 02 Feb 2002
Karma :
PostPosted: 14:57 - 20 Oct 2016    Post subject: Re: NSR rear brake caliper swap Reply with quote
Probably an all-round better option...
https://www.ebay.co.uk/itm/BREMBO-Brake-Caliper-Stickers-Decals-x-8-/310245646506

Often bikes are the other away around - Brembo rear brake, but other front brake.
 Back to top
View user's profile Send private message You must be logged in to rate posts

fully677
Nova Slayer



Joined: 25 Mar 2006
Karma :
PostPosted: 15:01 - 20 Oct 2016    Post subject: Reply with quote
yeah due to now having aprilia forks was easier getting the brembo.

I think I may just stick with the original NSR one at the back
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

skatefreak
World Chat Champion



Joined: 06 Feb 2010
Karma :
PostPosted: 15:03 - 20 Oct 2016    Post subject: Reply with quote
NSR 125 track bike?
I have an NSR knocking about... Where the heck are you taking this machine?

Am really tempted to take it to the usual track days just for a giggle but I would just be a hazard around all the litre bike track day heros :-\
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

fully677
Nova Slayer



Joined: 25 Mar 2006
Karma :
PostPosted: 15:06 - 20 Oct 2016    Post subject: Reply with quote
Got bored wanted a project, though this is my main bike not a track.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

G
The Voice of Reason



Joined: 02 Feb 2002
Karma :
PostPosted: 15:08 - 20 Oct 2016    Post subject: Reply with quote
skatefreak wrote:

Am really tempted to take it to the usual track days just for a giggle but I would just be a hazard around all the litre bike track day heros :-\

Derestricted NSR should still do ok, especially on a tighter track if you're decent in the corners.
 Back to top
View user's profile Send private message You must be logged in to rate posts

Kickstart
The Oracle



Joined: 04 Feb 2002
Karma :
PostPosted: 19:57 - 20 Oct 2016    Post subject: Reply with quote
Hi

Thought it was just a Grimeca copy of a Brembo basic twin opposed piston caliper. If so fairly standard on a lot of bikes.

All the best

Katy
____________________
Traxpics, track day and racing photographs - Bimota Forum - Bike performance / thrust graphs for choosing gearing
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

stirlinggaz
World Chat Champion



Joined: 22 Jul 2007
Karma :
PostPosted: 20:15 - 20 Oct 2016    Post subject: Re: NSR rear brake caliper swap Reply with quote
fully677 wrote:
Hi my bike has undergone lots of changes and now has upside down forks


Hi,
have you posted anywhere, your mods?
Genuinely Interested.
I have a "spare" jc22 & fancy fitting some usd's (maybe mito front end) & fitting better brakes, rear shock etc but need some clues/inspiration.

cheers,
GAZ
ps: apologies if this has been asked before (especially if it was me that asked Smile )
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

fully677
Nova Slayer



Joined: 25 Mar 2006
Karma :
PostPosted: 22:11 - 20 Oct 2016    Post subject: Reply with quote
Kickstart wrote:
Hi

Thought it was just a Grimeca copy of a Brembo basic twin opposed piston caliper. If so fairly standard on a lot of bikes.

All the best

Katy


Hi Katy, thanks for the reply, the brembos that I have seen online the mounting points seem to be further than the NSRs.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

fully677
Nova Slayer



Joined: 25 Mar 2006
Karma :
PostPosted: 22:13 - 20 Oct 2016    Post subject: Reply with quote
Hi Gaz, I haven't yet but the works nearly finished, I shall post all the work once I'm complete.

I will send you a message once done.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

skatefreak
World Chat Champion



Joined: 06 Feb 2010
Karma :
PostPosted: 10:57 - 21 Oct 2016    Post subject: Reply with quote
G wrote:
skatefreak wrote:

Am really tempted to take it to the usual track days just for a giggle but I would just be a hazard around all the litre bike track day heros :-\

Derestricted NSR should still do ok, especially on a tighter track if you're decent in the corners.


I agree, it wouldn't be to bad at all however I've only really ridden at Bedford Aerodrome and Snetterton both with plenty of straights :-\

Will be trying out Rockingham this weekend, should be interesting Very Happy
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

G
The Voice of Reason



Joined: 02 Feb 2002
Karma :
PostPosted: 11:22 - 21 Oct 2016    Post subject: Reply with quote
Gazdaman who used to post on here did his first trackday on a stock MZ250.
They do race them, but typically with some tuning and better tyres. He had tyres that were squarer than some car tyres and a stock engine that despite being a 250 2 stroke, with no expansion chamber probably made less than a NSR in good state.
This was old Snetterton (similar to 200); he was still managing to go past lots of people at Corams etc.

I did Bedford SW configuration and that's got a really, REALLY long straight - reckon I was topped out at 146 (my bike is downgeared a bit) for about half a kilometre and was still getting used to the track!
 Back to top
View user's profile Send private message You must be logged in to rate posts

Kickstart
The Oracle



Joined: 04 Feb 2002
Karma :
PostPosted: 19:15 - 22 Oct 2016    Post subject: Reply with quote
fully677 wrote:

Hi Katy, thanks for the reply, the brembos that I have seen online the mounting points seem to be further than the NSRs.


Not sure which ones you have seen. I mean the older style ones, such as this one used on the Cagiva Freccia:-

https://timoto.com/rear+brake+caliper-Cagiva+FRECCIA+125-139226.htm

If you can measure if I can check one I have floating around.

All the best

Katy
____________________
Traxpics, track day and racing photographs - Bimota Forum - Bike performance / thrust graphs for choosing gearing
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts
Old Thread Alert!

The last post was made 9 years, 103 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> The Workshop All times are GMT
Page 1 of 1

 
 You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 
Debug Mode: ON - Server: birks (www) - Page Generation Time: 0.07 Sec - Server Load: 0.86 - MySQL Queries: 14 - Page Size: 80.21 Kb