Yamaha YBR 125 Indicator Flasher / Relay

[gwernybwch]

Come to ride the ole YBR125 after several months of it being parked up and the indicators aren't flashing. (Checked all four bulbs are working and enough battery power to start the bike)

Have taken off the relay and sprayed it with some WD40, when I turn the indicators on I have hear a sort of grinding / clicking noise for the relay.
Is this the type of noise that faulty relay makes? Or is it more likely faulty wiring?

Thanks in advance for any replies.

[Easy-X]

Relays cost feck all, just buy one
____________________
Royal Enfield Continental GT 535, Husqvarna Vitpilen 401, Yamaha XSR700, Honda Rebel, Yamaha DT175, Suzuki SV650 (loan) Fazer 600, Keeway Superlight 125, 50cc turd scooter

[WD Forte]

Easy to test
Pull off the 2 way connector from the relay
Strip a small length of wire and push it into the connector
so the Brown and brown/White wires are linked

Turn on ignition and switch the flashers on and off both sides
If all blubs come on fully bright, buy new relay
____________________
bikers smell of wee

[stinkwheel]

Just replace it.

Get 2 pin electronic one. Be around a fiver
____________________
“Rule one: Always stick around for one more drink. That's when things happen. That's when you find out everything you want to know.”
I did the 2010 Round Britain Rally on my 350 Bullet. 89 landmarks, 3 months, 9,500 miles.