Car mobile phone mount that is secure?

[Ribenapigeon]

Can anyone recommend a phone holder for a car dash or windscreen that actually stays securely fixed in place and is much cheapness.

I bought one from The Range but the damn thing just falls off the window or the dash. It has some sticky stuff nonsense which just doesn't actually stick and the supposed suction cup clearly doesn't pull enough suction unless on an absolutely flat surface.

Cheers.

[Fat Angry Scotsman]

Quite simply, I don't think a good-quality, low-cost screen mount exists.

This is what I am getting for in the car after the £20 Belkin one that I got has started to constantly fall off the windscreen in my car:

https://www.quadlockcase.co.uk/collections/shop-mounts/products/quad-lock-car-mount
____________________
PRESENT: 2018 BMW S1000XR SE Sport.
PAST: 2009 Kawasaki ER-6F. 2021 Zontes ZT-125U.

[Islander]

Or replace the sticky pad with a decent quality 3M EHB double sided pad and thoroughly clean/degrease the surfaces before you stick it down...

[Ribenapigeon]

[Ribenapigeon]

[MarJay]

I have a magnetic air vent mount that is solid, it stays in place and it is easy to remove the phone from. You need a phone case with a metal plate in it, but it works very well.
____________________
British beauty: Triumph Street Triple R; Loony stroker: KR1S; Track fun: GSXR750 L1; Commuter Missile: GSX-S1000F
Remember kids, bikes aren't like lego. You can't easily take a part from one bike and then fit it to another.

[pepperami]

Super glue your phone directly to the windscreen


Once again the sage that is Pepperami provides the wisdom to solve the problem .
You’re welcome
____________________
I am the sum total of my own existence, what went before makes me who I am now!

[Ribenapigeon]

[Ribenapigeon]

[MarJay]

[MCN]

Ram should have wot u want.

If you don't value the worth of the device you're holding then the pound shop will suffice.

The better tools use a flat disc of prastic that you stick to the dash using its VHB tape/similar sized disc.
Then the tool's sucker has something suitable to sook onto.

Some surfaces may be flat but a little porous so air facks up the sucker's vaccum.

(VHB can be removed using a hair drier/heat gun to soften the adhesive.)
____________________
Disclaimer: The comments above may be predicted text and not necessarily the opinion of MCN.

[The Shaggy D.A.]

I have this on my dash. The 3M pad is stuck solid.

https://www.amazon.co.uk/gp/product/B07XDYPG1V
____________________
Chances are quite high you are not in my Monkeysphere, and I don't care about you. Don't take it personally.
Currently : Royal Enfield 350 Meteor
Previously : CB100N > CB250RS > XJ900F > GT550 > GPZ750R/1000RX > AJS M16 > R100RT > Bullet 500 > CB500 > LS650P > Bullet Electra X & YBR125 > Bullet 350 "Superstar" & YBR125 Custom > Royal Enfield Classic 500 Despatch Limited Edition (28 of 200) & CB Two-Fifty Nighthawk > ER5

[Ribenapigeon]

The device itself is well designed amd has wireless charging so im thinking hack off the sucker bit then fabricate a pad out of foamex and 3m it to the dash, either with 3m sticky pad or the 3m hook+eye pads.

[Kawasaki Jimbo]

I’ve got a £5 Halfords One Touch Universal Car Mount Holder which seems good although I don’t leave it on the windscreen all the time. I’ve also had it stuck on the music player’s 7” screen which allows a short and tidy connection to the 12v socket.