96 Diversion exhaust part needed!!

[White Noise]

Can anyone help me, i need to connect some new downpipes to the exsisting cans of a 1996 XJ600s diversion and i thought it would be simple but it seems not. from the attached picture i need to get parts "10" and "11", can anyone identify them and where i could get them from?

think 11 is a silencer gasket

Cheers
WN
____________________
Buy my wife: 96' Yam XJ600s (Diversion)
Wing Commander White Noise - SE Clique
Riding Tip #86: See God, then back off a bit: Problem is i haven't seen god yet, just a close up of tarmac on revett straight

[Guest]

Yamaha probably call them exhaust gaskets or seals - it'd be best to replace the one on the other side (#5) as well if you're having it apart. You'll only need to replace the clamp if you have to butcher it to get it off unless Yam sell them as a set - seal and clamp together.


You'll also need to replace the gaskets at the cylinder head (#13) so buy four of those as well. Any Yam dealer worth his salt should have all the parts in stock.

[White Noise]

yeah i am going to replace both sides anyway abd i am getting the header gaskes wih the downpipes so that side is sorted, does anyone one know where a can get this part number
cheers
WN
____________________
Buy my wife: 96' Yam XJ600s (Diversion)
Wing Commander White Noise - SE Clique
Riding Tip #86: See God, then back off a bit: Problem is i haven't seen god yet, just a close up of tarmac on revett straight

[Kickstart]

Hi

One looks like a clamp which should be easy to get from somewhere like M&P. The other bit looks like a gasket which might well be like the one on the FZR600. In this case it is a short tube made out of, for want of a better description, wire wool. They can be reused a few times, but the FZR one is quite expensive for what it is.

All the best

Keith
____________________
Traxpics, track day and racing photographs - Bimota Forum - Bike performance / thrust graphs for choosing gearing

[Guest]

From the Yamaha America site, these parts are for the XJ600SH Seca which I believe is the same model but I may be wrong



Part no. 5 - 3VD-14755-00-00 GASKET, SILENCER 2 off


Part no. 13 - 4BR-14613-00-00 GASKET, EXHAUST PIPE 4 off

[White Noise]

tonight before it got dark i took the end can off and now i can see a problem. the end can has a overlip thats welded to the endcan See diagram. on mine this is completely gone though rust, apart from a little stump. so i plan to patch it up with an exhaust bandage at the join, for now. then find someone who is handy with a welder to weld on this overhang buy using a larger diameter aluminum pipe that can be compressed by a exhaust clamp onto a gasket.
Has anyone got any suggestions for this plan? and does anyone know anyone that is handy with a welder in the south east of england,
cheers
Mike
____________________
Buy my wife: 96' Yam XJ600s (Diversion)
Wing Commander White Noise - SE Clique
Riding Tip #86: See God, then back off a bit: Problem is i haven't seen god yet, just a close up of tarmac on revett straight

[Kickstart]