Help & FAQs    Search BCF    Members    Groups    Events Calendar
Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


Throttle stop restrictor has rounded screws.

 Reply to topic
Bike Chat Forums Index -> The Workshop
View previous topic : View next topic  
Author Message

Reevo8
World Chat Champion



Joined: 30 Jun 2004
Karma :
PostPosted: 09:21 - 28 Jul 2005    Post subject: Throttle stop restrictor has rounded screws. Reply with quote
Right, the monkeys at Honda have managed to bork 2 crosspoint screws on my CBR. How should I get them off?

They are currently attached to the throttle stop which is on the throttle bodies. They need to go back in afterwards, so they are quite important!
____________________
05 ZX10R, (**05 WKR) Very Happy
 Back to top
View user's profile Send private message You must be logged in to rate posts

Klause
World Chat Champion



Joined: 25 Apr 2004
Karma :
PostPosted: 11:41 - 28 Jul 2005    Post subject: Reply with quote
So the screws are out? If so just go to your local hardware/auto place that sells screws, nuts and bolts etc.
____________________
Current bikes: 1960 Triumph 5ta x2, TTR600RE, KTM200EXC, Cagiva Elephant 900ie.
 Back to top
View user's profile Send private message You must be logged in to rate posts

Jrod
Page 3 Girl



Joined: 02 Aug 2004
Karma :
PostPosted: 13:48 - 28 Jul 2005    Post subject: Reply with quote
No they are still on the bike. He's trying to de-restrict it. Tut Tut
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Reevo8
World Chat Champion



Joined: 30 Jun 2004
Karma :
PostPosted: 14:56 - 28 Jul 2005    Post subject: Reply with quote
Klause wrote:
So the screws are out? If so just go to your local hardware/auto place that sells screws, nuts and bolts etc.


Dont be fucking silly, how stupid do you think I am?

Cheeky beggar.
____________________
05 ZX10R, (**05 WKR) Very Happy
 Back to top
View user's profile Send private message You must be logged in to rate posts

Guest
Brolly Dolly



Joined: 22 Apr 2004
Karma :
PostPosted: 15:51 - 28 Jul 2005    Post subject: Reply with quote
Use a flat-ended piece of bar or a drift and gently tap the ends over to 'fill' the cross-point hole up again with material. Then use an impact driver with the largest bit that will fit and give 'em a sharp tap.
 Back to top
View user's profile Send private message You must be logged in to rate posts

stinkwheel
Bovine Proctologist



Joined: 12 Jul 2004
Karma :
PostPosted: 16:22 - 28 Jul 2005    Post subject: Reply with quote
Guest wrote:
Use a flat-ended piece of bar or a drift and gently tap the ends over to 'fill' the cross-point hole up again with material. Then use an impact driver with the largest bit that will fit and give 'em a sharp tap.


And when you find that doesn't work, drill the heads off them and remove the stump with a pair of pliers.

They probably burred them off on purpose to stop you doing exactly what you are doing.

Quote:
They need to go back in afterwards, so they are quite important!


If you even THINK about putting screws back in that you know have burred heads, I will personally track you down, come round your house and give you the kick up the arse you so richly deserve on general principle.

Get them out, throw them in the bin and fit new ones! Even if they are an obscure size, a genuine honda part will only cost pennies.
____________________
“Rule one: Always stick around for one more drink. That's when things happen. That's when you find out everything you want to know.”
I did the 2010 Round Britain Rally on my 350 Bullet. 89 landmarks, 3 months, 9,500 miles.
 Back to top
View user's profile Send private message You must be logged in to rate posts

Guest
Brolly Dolly



Joined: 22 Apr 2004
Karma :
PostPosted: 23:49 - 28 Jul 2005    Post subject: Reply with quote
stinkwheel wrote:

They probably burred them off on purpose to stop you doing exactly what you are doing.



Derrrrr, never fort of that Embarassed Not used to this sort of thing you see. The only restrictors we had as a lad was the carb top vibrating off Laughing




stinkwheel wrote:
If you even THINK about putting screws back in that you know have burred heads, I will personally track you down, come round your house and give you the kick up the arse you so richly deserve on general principle.


Razz
 Back to top
View user's profile Send private message You must be logged in to rate posts
Old Thread Alert!

The last post was made 21 years, 79 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> The Workshop All times are GMT + 1 Hour
Page 1 of 1

 
 You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 
Debug Mode: ON - Server: birks (www) - Page Generation Time: 0.08 Sec - Server Load: 1.43 - MySQL Queries: 14 - Page Size: 52.85 Kb