nitromors

froggy128 · World Chat Champion Joined: 14 Mar 2005 Karma :

has anyone had any experiance at using nitromors on bike frames etc.?

Robby · Dirty Old Man Joined: 16 May 2002 Karma :

I used it on a fuel tank. Did the job. Took a fair while, but I had 20 years worth of bodged resprays to work through.

Ducati750s · Borekit Bruiser Joined: 01 May 2005 Karma :

I used to use it all the while on steel and aluminium mountain-bike frames, it used to work a treat.

I'd keep it off any plastics though.
____________________
It's all about the torque...

VFR400UK · Scooby Slapper Joined: 29 Jun 2004 Karma :

Keep it off your skin aswell! evil stuff!

Wear gloves and dab it on with a big brush that you can afford to wreck.
Keep it away from plastic rubber and fibreglass then scrape it all off.
You can use wire wool or a wire brush and only when you have scraped off all you can, otherwise you just gunge it up and splatter it all over yourself (speaks from expirence Laughing

)

Liono · Spanner Monkey Joined: 22 Jul 2004 Karma :

I used it to strip the old paint from the torque arm for my rear brake before I re-painted it. It was only a small area, but it worked well. I just sloshed a load of it on, left it a few minutes to do whatever chemical nastiness it does, then scraped if off with paint scraper. After a quick rinse and going over with a Scotchbrite pad to get off the bits I had missed it had worked nicely.

yzf750r · World Chat Champion Joined: 04 Nov 2004 Karma :

used it to take the factory paint off my rims, in order to polish them!

Works a treat! Thumbs Up

____________________
04 zx10r with mods - 187.4bhp at the wheel! :o

McGee · O RLY? Joined: 24 Jun 2005 Karma :

Jeez you have started 3 posts today and its like which one to reply to ..... Confused.
____________________
◙◙► K6 GSXR 600 ◄◙◙◙◙► K5 GSXR 1000 ◄◙◙◙◙► K5 GSXR 600 ◄◙◙◙◙► 96 RF600r ◄◙◙
◄◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙►◄◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙►◄◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙►
Its pronounced Jixxer!

shammon · World Chat Champion Joined: 24 Jun 2005 Karma :

Make sure you use gloves is Burns like fuk if it gets on your skin will strip paint of nicley use plenty with a stiff brush for the tuff bits.

froggy128 · World Chat Champion Joined: 14 Mar 2005 Karma :

ZRX61 · Victor Meldrew Joined: 05 Nov 2003 Karma :

wire brush, steel wool, plastic scrapers etc, helps if ya cover the stripper with tin foil which stops it drying out so it works longer/better.
I have some really spiffy carbon/carbon scrapers made from the tail of an F117 that work quite well Smile

deputy · Scooby Slapper Joined: 12 Jun 2004 Karma :

Only experience of Nitromors I have had was when a lad that I used to work with painted the interior walls of a portacabin with emulsion and got more paint on the floor than the walls. He then decided to clean the floor and poured Nitromors on the VINYL floor and used an industrial floor buffer to spread most of the floor all over the newly painted walls. Absolute classic.

DynaMight · World Chat Champion Joined: 27 Oct 2004 Karma :

Used it to take the paint off wheels and a swingarm, Works really well and has never needed more than 2 coats (although the 2nd coat is only applied to small areas)
____________________
My bikes are at https://www.bikepics.com/members/dynamight/