TT600 Indicator Not Working

[stowen]

Hi, I've just taken delivery of a W/2000 reg, TT600 and appear to have a faulty front r/hand indicator. Bulb's not faulty (swapped it with one of the others), I've got voltage as I'd expect.....but the lamp will not light.

Unfortunately, I've got large hands and I can't get under the faring to disconnect the leads to pull the entire thing out.

Any ideas on how to take the faring off, or if anyone else has had this issue before and fixed it with some double sided tape or something? (I hate to take the bike in to Triumph only to ask them to fix this!)

Thanks.
____________________
StoweN

[craigs23]

Could it just be the indicator connector's come loose? Are the others okay? Does the rear indicator come on but stay on?

[stowen]

Hi, the others all come on - the rear (same side) flashes at normal speed. I've checked the connection and it seems ok as there's voltage....don't understand to be honest.
____________________
StoweN

[colin1]

check the connection where the indicator is connected to the wiring loom

if you dont wanna do it with the fairing on, take the fairing off

you just undo the screws with an allen key

also check that the contacts to the bulb are as they should be and not bent out of place so they arent touching it properly
____________________
colin1 is officially faster than god

[stowen]

All sorted....thanks to everyone.
____________________
StoweN