Powerbronze Kawasaki Z750S hugger

[syl]

Just fitted a Powerbronze hugger to my Z750S. Hadn't seen one before on this bike, so thought I would post some pictures. Quite easy to fit. The only minor gripe I had is that the bracket comes in stainless steel - so sprayed it black before fitting.

Anyway, off out to ride it now.
____________________
Current bike: Kawasaki Z750S

[McGee]

Looks good mate
____________________
◙◙► K6 GSXR 600 ◄◙◙◙◙► K5 GSXR 1000 ◄◙◙◙◙► K5 GSXR 600 ◄◙◙◙◙► 96 RF600r ◄◙◙
◄◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙►◄◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙►◄◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙►
Its pronounced Jixxer!

[Whosthedaddy]

Smartens that arse up nicely
____________________
Current : MSX 125 Past : CBR 900RR Monkeybike : c50 LAC : ZXR750 H2 : FZR600 : ZX7R P3 : YW100 : TRX850: Trophy 900 T309 : GSXR 600 L0: Monkeybike : XJ6S Whosthedaddy

[short1uk]

sweet, looks well nice that mate!

Love that bike

[byke95]

What made you decide to get shot of the hugger that comes with the bike?

[Type_Mo]

My boss has had his one for a while He just fitted a Micron End can on saturday, sounds niice
____________________
- Typhoon ?0 - Yamaha DT125R - Aprilia SR125 - Yamaha DT125R - Honda Hornet 600 -

[syl]

[Andy C]

looks nice but not sure about the grill bits tbh, surely that means a little bit of muck still gets to the shock and other bits due to the grill (though a lot less than without hugger)

But other than that does look nice
____________________
99 RS125 --> 02 SV650s --> 03 Speed Four --> 92 RXS100 --> 93 CB400sf --> 01 CB600f Hornet

[syl]

Nah, due to the angles involved, anything that managed to get through the grill (and the mesh is very tight, not much is coming through) would be travelling in such a direction that it would probably hit nothing at all - and would certainly be miles away from the shock.

I decided I wanted a black one rather than colour matched, and I like the look of the mesh too. So for £80 I bought this, which I thought was not unreasonable.
____________________
Current bike: Kawasaki Z750S