mot question

code guru · Brolly Dolly Joined: 25 Jan 2006 Karma :

my nsr needs a new mot on the 20th of next month i think and i got a question

ok now theres this metal bit that holds the speedo cable and it bolts onto the inside pannels sort off see the pic's. i had to take it off because i fitted new indi's and the bolt that holds the metal thing is the stem of the indicators, now my new indicators r kinda diffrent so i couldnt put the thing back on.
will my bike pass the mot with out it? if it wont i will have 2 drill a hole and put a nut and bolt were or near were it was before.

this is how it is now
https://img435.imageshack.us/img435/5600/dsc00004xx2.th.jpg

this is how it looked before
https://img506.imageshack.us/img506/6102/dsc00005tz0.th.jpg

thanks
sorry the bad spelling and bad pics ect

McJamweasel · BCF Junkie Joined: 22 Mar 2002 Karma :

As long as it doesn't interfere with steering movement there is no reason why it should fail. However, just be aware that it will run on the fairing and will damage itself/the panel. If its rubbing on the panel I would probably stick an advisory notice on it.
____________________
BCF: Be yourself, just don't be an arse.

Ichy · World Chat Champion Joined: 15 Jul 2005 Karma :

For the amount of work involved I would do it properly and drill a hole.
____________________
https://www.metacafe.com/watch/1972097/how_to_behave_on_a_forum/

Dark · World Chat Champion Joined: 02 Jun 2004 Karma :

I doubt they'd fail your bike for that, as McJam says as long as it doesn't interfere with your steering you should be ok
____________________
My Bikes in order:- Yamaha RXS100 / Suzuki X7 250 / Yamaha RD350LC / Kawasaki
KR1S 250 / Kawasaki ZXR750 H2 / Honda C50 / Kawasaki ZX7R P5 / Kawasaki ZX10R / Suzuki GSXR 400 / Honda CBR1100 Blackbird & Yamaha FZR 600