Help & FAQs    Search BCF    Members    Groups    Events Calendar
Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


Z1000 (2003) Front sprocket change

 Reply to topic
Bike Chat Forums Index -> The Workshop
View previous topic : View next topic  
Author Message

Micron
Derestricted Danger



Joined: 15 Oct 2005
Karma :
PostPosted: 14:45 - 04 Jun 2006    Post subject: Z1000 (2003) Front sprocket change Reply with quote
Hi,
can someone tell me what I need to change the front sprocket on a Z thou?

do I need an extractor, or just a good socket?

thanks

Trev
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

instigator
Super Spammer



Joined: 19 Oct 2004
Karma :
PostPosted: 15:52 - 04 Jun 2006    Post subject: Reply with quote
Trev,

First google search wrote:

27mm and some muscle. I used my large torque wrench, if your by yourself use a zip tie to hold your front brake on. You also have to bend the washer down that holds the nut in place. Loosen the axle and the chain adjusters so the wheel can move all the way forward. It just takes a little strength and some maneuvering to get the sprocket out.


https://www.riderforums.com/archive/index.php/t-5208.html

Half way down the page or so.

I take it we are downgearing?
 Back to top
View user's profile Send private message You must be logged in to rate posts

Micron
Derestricted Danger



Joined: 15 Oct 2005
Karma :
PostPosted: 17:08 - 04 Jun 2006    Post subject: Reply with quote
No, just renewing the sprockets, it's done a few miles, all those trips abroad soon mount up.

thank's for the information will give it a go.

Trev
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

G
The Voice of Reason



Joined: 02 Feb 2002
Karma :
PostPosted: 17:24 - 04 Jun 2006    Post subject: Reply with quote
Personally I don't like using the chain to hold the sprocket - you can easily stick 1000ft-lb or so of torque through it.

Often you will find that using the rear brake to hold the wheel isn't enough - I've snapped a wooden hammer shaft using it to block the rear wheel up.

Personally, I try and use an impact wrench of some kind (air/electric) as it generally makes it a lot less hassle and with a lot less likely-hood of damaging the bike.
 Back to top
View user's profile Send private message You must be logged in to rate posts

Finglonga
World Chat Champion



Joined: 27 Jul 2004
Karma :
PostPosted: 21:16 - 04 Jun 2006    Post subject: Reply with quote
Micron wrote:
No, just renewing the sprockets, it's done a few miles, all those trips abroad soon mount up.

thank's for the information will give it a go.

Trev


Aren't you replacing the chain too?
____________________
Andy Sez....
F.Y.Y.F.F.
 Back to top
View user's profile Send private message You must be logged in to rate posts

Micron
Derestricted Danger



Joined: 15 Oct 2005
Karma :
PostPosted: 22:55 - 04 Jun 2006    Post subject: Reply with quote
Yes, complete chain and sprocket change, manged to do the rear one, just having probs with the front Wink
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

ZRX61
Victor Meldrew



Joined: 05 Nov 2003
Karma :
PostPosted: 00:50 - 05 Jun 2006    Post subject: Reply with quote
3ft breaker bar, put the front wheel against a wall, 2x4 thru the rear wheel & have someone of the other side of the bike to steady it as you will probably lift the rear of the bike off the ground.
 Back to top
View user's profile Send private message You must be logged in to rate posts

Micron
Derestricted Danger



Joined: 15 Oct 2005
Karma :
PostPosted: 17:41 - 05 Jun 2006    Post subject: Reply with quote
All sorted now, thanks everyone Wink
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts
Old Thread Alert!

The last post was made 19 years, 249 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> The Workshop All times are GMT
Page 1 of 1

 
 You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 
Debug Mode: ON - Server: birks (www) - Page Generation Time: 0.07 Sec - Server Load: 1.02 - MySQL Queries: 13 - Page Size: 55.06 Kb