Help & FAQs    Search BCF    Members    Groups    Events Calendar
Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


help with my nsr back wheel

 Reply to topic
Bike Chat Forums Index -> The Workshop
View previous topic : View next topic  
Author Message

code guru
Brolly Dolly



Joined: 25 Jan 2006
Karma :
PostPosted: 21:50 - 14 Jun 2006    Post subject: help with my nsr back wheel Reply with quote
ok i whant 2 take my nsr back wheel off 2 fit a new sproket. now i taken the nut off one side and i tryed 2 undo it from the other side but the axel or spindel wot ever its call just keeps moveing around and it wont come out Confused
i dont know wot 2 do. because by back tyre needs a new valve as well because if i pump it up it losses air so atm is ok well it rides ok but it need pumping up.
thanks
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

shaun_04
Brolly Dolly



Joined: 06 Aug 2005
Karma :
PostPosted: 21:56 - 14 Jun 2006    Post subject: Reply with quote
the other side isn't a nut, it's part of the big bolt.
just hit the other side of the axel (the bit sticking out from when you removed the nut) with a mallet and it will come out. All should become obvious from then on. Remember to keep track of the order that spacers and bearings etc came off.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

code guru
Brolly Dolly



Joined: 25 Jan 2006
Karma :
PostPosted: 22:17 - 14 Jun 2006    Post subject: Reply with quote
shaun_04 wrote:
the other side isn't a nut, it's part of the big bolt.
just hit the other side of the axel (the bit sticking out from when you removed the nut) with a mallet and it will come out. All should become obvious from then on. Remember to keep track of the order that spacers and bearings etc came off.

lol i tryed it before with a big hammer and fucked the end off the thing so the nut wouldnt go on but i had 2 grind the end off it off Embarassed
anyway all try again 2moro then with a mallet
thanks

Last edited by code guru on 22:20 - 14 Jun 2006; edited 1 time in total
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Handsome
World Chat Champion



Joined: 30 Dec 2005
Karma :
PostPosted: 22:19 - 14 Jun 2006    Post subject: Reply with quote
That's your Problem, if you'd have tried a Big Hammer it would have been sorted by now.....
____________________
Previous Bikes...Honda NSR 125 RR...Kawasaki Zephyr 550...Suzuki SV 1000 S...Yamaha FZ8...Current Bike...Suzuki GSX-R 750...
 Back to top
View user's profile Send private message You must be logged in to rate posts

code guru
Brolly Dolly



Joined: 25 Jan 2006
Karma :
PostPosted: 22:24 - 14 Jun 2006    Post subject: Reply with quote
NSR-AD wrote:
That's your Problem, if you'd have tried a Big Hammer it would have been sorted by now.....

i did try a big hammer but it wouldnt move Sad
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Handsome
World Chat Champion



Joined: 30 Dec 2005
Karma :
PostPosted: 22:27 - 14 Jun 2006    Post subject: Reply with quote
Doh! You missed it don't worry.....

Did you HIT it or TICKLE it, or try WD40 or the like to Free it a little.....
____________________
Previous Bikes...Honda NSR 125 RR...Kawasaki Zephyr 550...Suzuki SV 1000 S...Yamaha FZ8...Current Bike...Suzuki GSX-R 750...
 Back to top
View user's profile Send private message You must be logged in to rate posts

mr jamez
World Chat Champion



Joined: 04 Aug 2003
Karma :
PostPosted: 22:34 - 14 Jun 2006    Post subject: Reply with quote
If you haven't got the bike on stands with the back wheel in the air, the weight pushing down on the spindle is going to make it difficult to get out. Next time you want to smack a threaded bolt with a hammer, wind a nut on and hit that instead Wink
____________________
NSR 125F > BROS 400 > NC30 > BROS 400 > Trumpet S4 > '97 VFR 750
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

code guru
Brolly Dolly



Joined: 25 Jan 2006
Karma :
PostPosted: 22:36 - 14 Jun 2006    Post subject: Reply with quote
mr jamez wrote:
If you haven't got the bike on stands with the back wheel in the air, the weight pushing down on the spindle is going to make it difficult to get out. Next time you want to smack a threaded bolt with a hammer, wind a nut on and hit that instead Wink

yer i got a back paddock stand,
yer ill do that 1st then put the nut on like so it hits the nut and not the bolt
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts
Old Thread Alert!

The last post was made 20 years, 13 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> The Workshop All times are GMT + 1 Hour
Page 1 of 1

 
 You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 
Debug Mode: ON - Server: birks (www) - Page Generation Time: 0.11 Sec - Server Load: 2.6 - MySQL Queries: 16 - Page Size: 58.21 Kb