do you know how a datatool alarm works

[ronnieringdin...]

is there anybody out there that knows what sequence of button presses that will unarm the bike so it can be moved and worked on

the alarm is a datatool the fob has number 433 if this means anythin

thanx very much ronnie

[sickpup]

Go to www.datatool.co.uk and read the manual.

[Zimbo]

Usually you turn the ignition on, then press the arm / disarm (circle) button for about five seconds until the system chirps. The unit is now in service mode, and will chirp once every 30 seconds or so, but the alarm and immobiliser functions are disabled.

[smpayne321]

Just to add to what Zimbo said above, if you're only needing to move the bike about you can just press the triangle button. That disables the movement sensor but leaves it immobilised. Don't switch the ignition on though, the alarm will go off.

Its not ideal for all jobs, but it means you can do things like was your bike or check the chain without the bike chirping all the time and pissing you off.

[ronnieringdin...]

thanx chaps the mist has cleared