Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


Aerox speed issue PLEASE HELP!

Reply to topic
Bike Chat Forums Index -> The Workshop
View previous topic : View next topic  
Author Message

Hettrick44
L Plate Warrior



Joined: 28 Aug 2009
Karma :

PostPosted: 22:30 - 28 Aug 2009    Post subject: Aerox speed issue PLEASE HELP! Reply with quote

Hi all,
I have just bought a 2002 yamaha aerox which has a viper sports exahust, kevlar belt and 6g rollers all installed by the previous owner. However the bike only hits 38mph on a flat but can do 70 with ease down a hill. When i hit about 50 down a hill i can feel the next power band come into play and the bike takes off.
Is there any wany i can make the last power band come into play on the flat so i can get more flat speed? I want to be able to do at least 45 on a flat.
Any help appreciated!
Hettrick
____________________
"When the flag drops the b.s stops"
2002 Yamaha Aerox - proud 16 year old can't wait to move on to something bigger Smile
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

TUG
World Chat Champion



Joined: 12 May 2007
Karma :

PostPosted: 19:28 - 29 Aug 2009    Post subject: Reply with quote

Theres no power bands in your bike... a power band is when your bike hits it peak performance making its most power. all engines do it even 4ts (though very short an small).
Your bike probably needs the carb setting up correctly, i wouldnt know where to start personally, maybe mixture is off?
____________________
Haz ER-5, innit!
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

rockers
Scooby Slapper



Joined: 29 May 2008
Karma :

PostPosted: 22:54 - 29 Aug 2009    Post subject: Reply with quote

sounds like the belt is slipping, mate had same problem, different scooter but same prob and it was the belt
 Back to top
View user's profile Send private message You must be logged in to rate posts

TUG
World Chat Champion



Joined: 12 May 2007
Karma :

PostPosted: 23:01 - 29 Aug 2009    Post subject: Reply with quote

Depends how bad the belt has worn, if a belts on its way out if will fail and slip.
____________________
Haz ER-5, innit!
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

W
L Plate Warrior



Joined: 30 Aug 2009
Karma :

PostPosted: 04:15 - 30 Aug 2009    Post subject: Reply with quote

Could be your rollers are too light, is it a 50? If so, why does it have 70mph on the clock?

It could also be running lean/rich, have you checked your spark plug?
 Back to top
View user's profile Send private message You must be logged in to rate posts

Hettrick44
L Plate Warrior



Joined: 28 Aug 2009
Karma :

PostPosted: 17:56 - 30 Aug 2009    Post subject: Reply with quote

Hi all thanks for the replies,
How do you check that the belt is worn im a newbie to this?
I know how to get at the belt i just don't know how to tell how worn it is?
Also, it is a 50cc and the clock only goes to 50mph but we got 70mph from the gap between where 50mph is on the clock and where the needle ends up.
Also, the rollers are heavy at 6g.
____________________
"When the flag drops the b.s stops"
2002 Yamaha Aerox - proud 16 year old can't wait to move on to something bigger Smile
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

P.addy
Red Rocket



Joined: 14 Feb 2008
Karma :

PostPosted: 12:23 - 31 Aug 2009    Post subject: Reply with quote

it wont do 70, so dont worry..your speedo tells lies.
You could try running it hard and then pulling the spark plug, if its all shitty and black, or horribly white, your mixture/carb could do with some sorting.

Im not sure how to check belts as ive never owned a moped, but some guys here are ace at it.

Dont expect it to do 70, hell dont even expect 50...its meant to do 30, and as your sig say your 16...legally you arent allowed over 31mph?

But hey! Check your carb Smile
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Noxious89123
World Chat Champion



Joined: 10 Jun 2007
Karma :

PostPosted: 19:35 - 31 Aug 2009    Post subject: Reply with quote

The faster you go, the more inaccurate your speedo will read... Especially if it's out of it's working range.
____________________
'06 Honda CBR125RW-6 ~ '00 Honda CBR600F-Y ~ '07 Honda CBR600RR-7 ~ Bikeless Sad
'53 Ford Ka 1.3 ~ '03 Vauxhall Astra SRi 1.8 ~ '52 Vauxhall Astra SRi 2.2 ~ '53 Vauxhall Astra GSi
 Back to top
View user's profile Send private message You must be logged in to rate posts
Old Thread Alert!

The last post was made 17 years, 13 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> The Workshop All times are GMT + 1 Hour
Page 1 of 1

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 

Debug Mode: ON - Server: birks (www) - Page Generation Time: 0.06 Sec - Server Load: 0.6 - MySQL Queries: 13 - Page Size: 54.61 Kb