nsr125r g reg HELP !!!!

NSR125R-JON · L Plate Warrior Joined: 15 Sep 2009 Karma :

Well here we go went out to the bike started it it was on the main stand running turned it off with the kill switch took off the main stand wheeled it out started it again on side stand went to shut gate and it stopped runing didnt think anythin about went to start it again and nothin so got a kill switch and starter switch fitted that and still nothing

ANY HELP WOULD BE SOOOOO GRATEFUL PLEASE HELP ME

B10Hazard · World Chat Champion Joined: 29 Jan 2009 Karma :

Not much to go on really mate.
It just stopped and won't start again Confused

Got a spark
Got fuel
Any safety switched got stuck or something.
Lots of bikes have safety switches on the stand and things.
Is your fuel tap "off" i have done it before Thumbs Up

Fuel line blocked.
Could be loads of things ...
____________________
Current bike .. The police stole it
No longer any socks
Let me take you on a trip . . let me show the world in my eyes.

NSR125R-JON · L Plate Warrior Joined: 15 Sep 2009 Karma :

It just wont fire no noise like its even tryin recently had new starter just nothin at the start button and it aint got a stand switch

stirlinggaz · World Chat Champion Joined: 22 Jul 2007 Karma :

hi,
whats happening when you press the starter button?
nothing at all?
can you hear the starter relay clicking?
do you have power to the lights etc?
checked the fuse(s)?
is the battery fully charged? (stick a multi-meter on it)
will it bump start?
cheers,
GAZ

MarJay · But it's British! Joined: 15 Sep 2003 Karma :

Please use full stops.

Change the spark plug and try again.
____________________
British beauty: Triumph Street Triple R; Loony stroker: KR1S; Track fun: GSXR750 L1; Commuter Missile: GSX-S1000F; Cheap project: CBR900RR FireBlade
Remember kids, bikes aren't like lego. You can't easily take a part from one bike and then fit it to another.

G-dawg · L Plate Warrior Joined: 15 Sep 2009 Karma :

Hi im new to this.
ive just picked up an old NS125R, got the same sorta problem i think???
Had a minor electrical fault with the lights, other than that it was fine was sitting for a while so ran it on the stand then took it for a spin,fine. stopped it put it on the stand and then.....nothing.
tried starting it again, slight popping first time then nothing since.
i belive the oil pump wasnt working properly and thus not mixing,so after said period "pop" the ring blew and thats why its now doing nothing? however i am not a bike mechanic... far from it being honest and any help would be appreciated

Gazz Sad

____________________
"why do people belive you when you say there are a billion stars, but check when you say that paint is wet?"

NSR125R-JON · L Plate Warrior Joined: 15 Sep 2009 Karma :

When the problem first started i tried bump startin it an it wanted to go but got annoyed with so left it . Am gettin power to the lights,indicators , horn but no clickin when i press the start button

alains · World Chat Champion Joined: 08 Jul 2004 Karma :

you should know that this bike doesnot require any voltage in the battery because it's an AC-CDI . this means that the ignition power comes direct from the alternator which has 2 coils in serial dedicated for that . if your bike doesnot bump start , i recommand to check fuel line , ignition coil terminal , sparplug
if still non starter it's more likely an alternator problem
____________________
the worst day fishing is better than the best day working