Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


Rust

Reply to topic
Bike Chat Forums Index -> The Workshop
View previous topic : View next topic  
Author Message

Bambam3
Renault 5 Driver



Joined: 19 Feb 2010
Karma :

PostPosted: 18:48 - 12 May 2010    Post subject: Rust Reply with quote

Being a bike noob, I'm not too sure of what to do in regards to rust.

Little patches are appearing on bolts and metal, on the frame etc.. and I'm about to give the bike a good clean and get some ACF-50 to cover it with.

Am I right in thinking it's best to wire wool off the rust, clean, dry, coat in ACF-50?

The rims had spots of rust all over, but they rubbed off okay, apart from a small patch which had seemingly attacked the chrome, so I couldn't remove it.

The front disc brake, the shiny bit where the brake.. brakes, that's fine, but the outside has rust and in other places too.

Spoke nipples are rusty, spokes have a bit etc..

Would I be able to remove most of it using the above method and maintain a relatively rust-free bike from now?

Any tips/things to look out for or things to avoid?

Cheers in advance.
Thumbs Up
 Back to top
View user's profile Send private message You must be logged in to rate posts

el_oso
World Chat Champion



Joined: 17 May 2008
Karma :

PostPosted: 18:56 - 12 May 2010    Post subject: Reply with quote

depends how far you want to go. wire wool is the easiest option which should work fine unless there is some serious amount of rust.
large amounts of rust would require something a bit more heavy duty like a wire brush attachment to a drill or an electrolysis bath
____________________
Duke 390
Previous: '05 XR125L | '96 XJ600S Diversion |'05 Suzuki GSXR1000 | '05 Honda CBR125-R | '97 YZF 600R Thundercat | '11 Honda CBR250
Car: Jeep Wrangler 4.0L
 Back to top
View user's profile Send private message You must be logged in to rate posts

Paxovasa
World Chat Champion



Joined: 25 Apr 2010
Karma :

PostPosted: 19:30 - 12 May 2010    Post subject: Reply with quote

Don't spray ACF-50 on the brake discs or the pads Thumbs Up

You could also use WD40, but again don't get any on the discs or pads.
____________________
Suzuki GSF600 K3 (in the fastest colour, black).
 Back to top
View user's profile Send private message You must be logged in to rate posts

oldbiker
Nitrous Nuisance



Joined: 15 Nov 2009
Karma :

PostPosted: 19:38 - 12 May 2010    Post subject: Reply with quote

If you have a handful of small rusty bits that need cleaning. soak them for a day or so in pickling vinegar..

you can buy stronger stuff from halfords etc. its usualy a mixture of phosphoric and nitric acid.

as sugested wire brushes in a drill are pretty good..

you could also use a "wire cup" brush fitted to an angle grinder
https://www.drillspot.com/products/80808/Weiler_13286_Knot_Wire_Cup_Brush

these usualy cost about £5 ish from machinemart etc.

the next most serious measure is sand and shot blasting but only for heavy rust on substantial structures.
____________________
It`s all powerfull white mans magic
https://i897.photobucket.com/albums/ac178/tzrsteve/album%201/035.jpg
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

chris-red
Have you considered a TDM?



Joined: 21 Sep 2005
Karma :

PostPosted: 19:38 - 12 May 2010    Post subject: Reply with quote

What bike?
____________________
Well, you know what they say. If you want to save the world, you have to push a few old ladies down the stairs.
Skudd:- Perhaps she just thinks you are a window licker and is being nice just in case she becomes another Jill Dando.
WANTED:- Fujinon (Fuji) M42 (Screw on) lenses, let me know if you have anything.
 Back to top
View user's profile Send private message You must be logged in to rate posts

Bambam3
Renault 5 Driver



Joined: 19 Feb 2010
Karma :

PostPosted: 19:47 - 12 May 2010    Post subject: Reply with quote

chris-red wrote:
What bike?


Honda XR125L.
 Back to top
View user's profile Send private message You must be logged in to rate posts
Old Thread Alert!

The last post was made 16 years, 133 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> The Workshop All times are GMT + 1 Hour
Page 1 of 1

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 

Debug Mode: ON - Server: birks (www) - Page Generation Time: 0.07 Sec - Server Load: 0.6 - MySQL Queries: 13 - Page Size: 48.14 Kb