DOMED WASHERS?

[stirlinggaz]

Hi all,
im looking for some domed washers like the ones at the front of this pic https://www.tastynuts.com/prodimage.php?prodcode=FCA050B&cat=0001000500010005&colours=yes
as the previous owner has replaced the oem ones with those tarty anodised red ones which have now turned a nice shade of pink! ( & im missing a couple)
dont need to be coloured, prefer just plain old stainless steel, as they are for fairings, but i aint paying pro-bolt prices!
my local hardware store is great for normal bolts & stuff but they dont stock these, so can anyone recommend somewhere on-line?
cheers,
GAZ

[DJH]

Screwfix? eBay?

[stirlinggaz]

[Tim..]

Go karts use them alot. I know its not a direct link but its a path to explore.

Tim
____________________
Project builds: My VFR400 nc30 build thread + Honda Britain Rep VFR + What? Another VFR +Project 'cos I want one' + V8 coffee table
www.marshallracing.co.uk
OCD - Helping to bring the standard of my bikes up and make me slowly go mad since 1999

[27cows]

Google countersunk washers - quite a few places sell them at fairly reasonable prices.
____________________
The RXS100: vehicle of choice for Chuck Norris

[stirlinggaz]

countersunk washers are the opposite of domed washers, arent they?
countersunk washers are indented, the go in, domed ones are raised they come outwards/upwards, if that makes any sense,lol
& before anyone says turn them upside down, i have considered that already.
cheers,
GAZ

[27cows]

Fairing washers are countersunk...aren't they? I'm not an expert on fairings, I have to confess
____________________
The RXS100: vehicle of choice for Chuck Norris

[stirlinggaz]

these ones are domed.
as they fill in the indentation on the fairings.
ordinary washers would do, but seeing as i have spent ages spraying it (properly,2k) i dont want to ruin the look of it. (i cant beleive i just said that)
cheers,
GAZ

[alun111]

As said plenty on ebay (Here)

Probolt ones too, just a lot cheaper I suspect.
____________________
Summer: '00 Honda CB600F Hornet
Winter: '93 Suzuki GSF 400 Bandit VP Variable Valve
Past Bikes: Lifan LF100-5 Lifan LF125-A Honda C70

[divuk83]

https://shop.ebay.co.uk/i.html?_nkw=dome+head+bolts&_armrs=1&_from=&_ipg=

Loads of black ones on ebay?

Dave

[stirlinggaz]

im needding M6 silver coloured ones. i already have the bolts. (& the link above is for bolts)
looked through the 196 listed & looks like the only option is pro-bolt.
though there were a couple more to look at,
just emailed one seller, awaiting a reply,
cheers,
GAZ

[swampy]

[finpos]

Drop the ones you have in caustic soda and you'll get silver ones!

f.

[27cows]

I'm sure there's no such thing as a 'domed washer'. The pic in the first post of this thread shows countersunk washers.
____________________
The RXS100: vehicle of choice for Chuck Norris

[stirlinggaz]

yes, there is such a thing as a domed washer, heres a pic of one,
https://www.itwproline.com.au/images/UserUploadedImages/211/POLY%20TEKS%20DOME%20WASHER%20EPDM.jpg
though that one is plastic, & slightly more curved than the ones i need, it gives you an idea of what im talking about, lol
its machined so that if the washer is sitting flat in front of you, the bottom diameter is bigger than the top diameter, ie. like a dome?
& theres no indent (or at least very little) on the top.
the problem i have/had was the set is mainly made up of M6 nuts & bolts but there is also M5 + M7, bolts,nuts,well nuts, countersunk washers & a couple of domed washers.
i will probably just do them all the same, ie different sizes of countersunk washers, all in silver/stainless steel,
thanks for all the help,
cheers,
GAZ