Help & FAQs    Search BCF    Members    Groups    Events Calendar
Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


Very odd low compression issue

 Reply to topic
Bike Chat Forums Index -> The Workshop
View previous topic : View next topic  
Author Message

mr-inteligent
Nitrous Nuisance



Joined: 04 Nov 2008
Karma :
PostPosted: 16:55 - 27 Aug 2010    Post subject: Very odd low compression issue Reply with quote
My bandit 400 was running sweet as a nut and then the starter motor stopped working.

Since changing this small part the bike has run like shit and will not idle. So either its a very odd coincidence that the bike now runs like shit or its something I have done when I replaced the starter motor.

its important to stress the bike literally went from running very well to running like shit in the space of 1 hours time while I put on the new starer motor.

The mechanic has just told me the bike has bad compression on 3 cylinders. He wants to start looking inside the engine for possible causes but before I give the go ahead I want to ask here if there is anything I could of missed?

To replace the SM I removed the carbs and also the cam chain adjustment, could this of caused the issue?
 Back to top
View user's profile Send private message You must be logged in to rate posts
N cee thirty This post is not being displayed because the poster is banned. Unhide this post / all posts.

mr-inteligent
Nitrous Nuisance



Joined: 04 Nov 2008
Karma :
PostPosted: 17:09 - 27 Aug 2010    Post subject: Reply with quote
I agree mate but I have checked and re checked everything.

Why would the bike suddenly lose compression just from me changing the SM?

Should I of put some sort of sealant around the cam chain adjustment part when replacing?
 Back to top
View user's profile Send private message You must be logged in to rate posts

chris-red
Have you considered a TDM?



Joined: 21 Sep 2005
Karma :
PostPosted: 17:09 - 27 Aug 2010    Post subject: Reply with quote
rob yarrr wrote:
maybe the cam chain needs adjusting properly

i wouldn't take it to the mechanics,they will charge you a bomb for just looking at it,never mind fixing it


A poorly adjusted chain chain wouldn't make it run shit it would just be noisy. It may have skipped a tooth but I doubt it, also that wouldn't cause low compression on 3 cylinders. Hows does the mechanic know it has LC on 3 cyclinders?

People pay mechanics because usually they know what they are talking about.
____________________
Well, you know what they say. If you want to save the world, you have to push a few old ladies down the stairs.
Skudd:- Perhaps she just thinks you are a window licker and is being nice just in case she becomes another Jill Dando.
WANTED:- Fujinon (Fuji) M42 (Screw on) lenses, let me know if you have anything.
 Back to top
View user's profile Send private message You must be logged in to rate posts

mr-inteligent
Nitrous Nuisance



Joined: 04 Nov 2008
Karma :
PostPosted: 17:24 - 27 Aug 2010    Post subject: Reply with quote
chris-red wrote:
Hows does the mechanic know it has LC on 3 cyclinders?


He has checked the valves and says they are ok, he has done a compression check and says they are low on 3.

lowest being 75 but this is a 20year old bike.

When I say "running shit" I mean not idling and slowly comeing down from 4k revs making a whirling noise.
 Back to top
View user's profile Send private message You must be logged in to rate posts

loply
World Chat Champion



Joined: 24 Mar 2004
Karma :
PostPosted: 20:08 - 27 Aug 2010    Post subject: Reply with quote
The starter motor isn't somehow staying 'connected' is it?

So the engine is spinning the starter motor over?

Might be completely impossible as I only know how the starter engager works on a Mille, no idea how it is on other bikes.
____________________
Yamaha SZR660 Caution to the wind, the throttle pinned!
 Back to top
View user's profile Send private message You must be logged in to rate posts

mr-inteligent
Nitrous Nuisance



Joined: 04 Nov 2008
Karma :
PostPosted: 20:35 - 27 Aug 2010    Post subject: Reply with quote
loply wrote:
The starter motor isn't somehow staying 'connected' is it?


I havent thought of that.. and its worth checking tomorrow when I get the bike back.. I cant let the mechanic go into the engine as it will cost more than the bike.
 Back to top
View user's profile Send private message You must be logged in to rate posts
Old Thread Alert!

The last post was made 16 years, 53 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> The Workshop All times are GMT + 1 Hour
Page 1 of 1

 
 You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 
Debug Mode: ON - Server: birks (www) - Page Generation Time: 0.18 Sec - Server Load: 0.46 - MySQL Queries: 13 - Page Size: 53.03 Kb