Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


Steering issue.

Reply to topic
Bike Chat Forums Index -> The Workshop
View previous topic : View next topic  
Author Message

chris-red
Have you considered a TDM?



Joined: 21 Sep 2005
Karma :

PostPosted: 15:16 - 15 Feb 2011    Post subject: Steering issue. Reply with quote

On my little RXS I am doing up there is a possible issue with the steering. There is not notchyness or anything to untoward, just that if you are turning the steering kind of falls inwards faster once it gets to a certain point. This happens both on the bike and with the wheel off the ground, once the steering goes past about 1/2 way it falls very quickly to full lock.

1. How to fix it? Is it the head bearings?

2. Is it an MOT failure?
____________________
Well, you know what they say. If you want to save the world, you have to push a few old ladies down the stairs.
Skudd:- Perhaps she just thinks you are a window licker and is being nice just in case she becomes another Jill Dando.
WANTED:- Fujinon (Fuji) M42 (Screw on) lenses, let me know if you have anything.
 Back to top
View user's profile Send private message You must be logged in to rate posts

Bezzer
World Chat Champion



Joined: 14 Apr 2005
Karma :

PostPosted: 15:49 - 15 Feb 2011    Post subject: Reply with quote

If theres no notchiness and no play at all when you rock the forks back and forward on and off the ground then it won't fail an MOT. You could tighten the head bearings up a touch if you want, manual will give you the right method for your particular forks. They will fall a bit quicker as you turn them and go past the balance point.
____________________
I used to be indecisive but now I'm not quite so sure.
 Back to top
View user's profile Send private message You must be logged in to rate posts

DrDonnyBrago
World Chat Champion



Joined: 03 Jan 2010
Karma :

PostPosted: 15:56 - 15 Feb 2011    Post subject: Reply with quote

If you are really heavy the front can go too light and will feel like it steers too quick. Same happened when I went pillion on my bros cb250.
 Back to top
View user's profile Send private message You must be logged in to rate posts

P.
Red Rocket



Joined: 14 Feb 2008
Karma :

PostPosted: 18:48 - 15 Feb 2011    Post subject: Reply with quote

The fact it happens with wheel off the ground would seem normal, all my bikes do so.. But the Daytona had a 16psi front tyre and was "flopping" into corners.
Popped 32psi in there and it was fine... take it your pressures are good?
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

chris-red
Have you considered a TDM?



Joined: 21 Sep 2005
Karma :

PostPosted: 18:56 - 15 Feb 2011    Post subject: Reply with quote

Maybe it's me then, my other bikes do get quicker the more you turn but if you lift the front the sterring will turn one one and with hit full lock with a crash at a fair rate of knots.
____________________
Well, you know what they say. If you want to save the world, you have to push a few old ladies down the stairs.
Skudd:- Perhaps she just thinks you are a window licker and is being nice just in case she becomes another Jill Dando.
WANTED:- Fujinon (Fuji) M42 (Screw on) lenses, let me know if you have anything.
 Back to top
View user's profile Send private message You must be logged in to rate posts

27cows
World Chat Champion



Joined: 01 Nov 2009
Karma :

PostPosted: 19:37 - 15 Feb 2011    Post subject: Reply with quote

Caused by there being less resistance in the cables when turning in one direction, I think. Depends on the routing. Mine does it to the right. More so since I removed the tacho cable when it snapped a while ago.
____________________
The RXS100: vehicle of choice for Chuck Norris
 Back to top
View user's profile Send private message You must be logged in to rate posts
Vincent This post is not being displayed because the poster is banned. Unhide this post / all posts.
Old Thread Alert!

The last post was made 14 years, 167 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> The Workshop All times are GMT
Page 1 of 1

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 

Debug Mode: ON - Server: birks (www) - Page Generation Time: 0.13 Sec - Server Load: 1.04 - MySQL Queries: 13 - Page Size: 51.57 Kb