Need help GSXR K3 600

[deamoon]

Need help GSXR K3 600

Problem is that when im riding it speedo misreads the speed when you actually on 30mph it shows 40+-mph, so the difference is about 10 miles.
Could you tell me where to look or to do to sort it out?
Speedo sensor cleaned. There are some scratching on sensor itself but not to deep, maybe that causes misread?

Thank you for all help

[P.addy]

Different sprockets installed on the bike?

[Budgetboy]

16 tooth front
45 tooth rear

thats standard for your model
____________________
www.Mailorderrepairs.co.uk We service your Carburetor's, Calipers & Suspension for less Also Bike repairs undertaken.

[deamoon]

[deamoon]

[P.addy]

That would cause an issue for you for sure! Check current teeth and you will probably find they are out.

[deamoon]

[deamoon]

right looked at rear sprocket and its a TALON 525 TR377-43
So i think its a 43Tooth sprocket not 45 original

[Casper]

Is it a UK bike? Some cowboy may have changed the clock face from KPH.

[P.addy]

[Casper]

[deamoon]

It is UK bike and yes you can change KPH or MPH and it says MPH

[P.addy]

You can get a speedo healer which will sort that for you.

[deamoon]

[P.addy]

Cheaper to buy the stock rear sprocket and a chain

[deamoon]

[P.addy]

Changing the rear sprocket on one of those is simple.

Loosen the sprocket nuts whilst wheel is still on bike.

Unbolt the rear wheel, think you need a 36mm socket.

Slide spindle out and lay wheel down, undo the bolts, remove sprocket and add new one.

Do the reverse. You'll have enough room on the adjusters to match your chain up to a slightly bigger sprocket

That said, you are in Essex, if you were able to ride to Maidstone in Kent, I'd happily give you guidance on doing it/do it for you for free Pretty sure someone in Essex would be able to do so also

[Rob W]

Your not far from me, I could give you a hand to change the rear sprocket.


____________________
'90 TS50 > '04 Senda 125 > '91 ZXR400 > '90 CB-1 > '04 GSX-R1000 > '96 Bandit 600 > '89 ZXR750 H1 > '96 GSX-R750 SRAD > '98 RR-W Fireblade > '98 T595 Daytona > '03 Hornet 900 > '04 Fireblade > '16 GSX-S1000F (x2) > '23 XSR900

[deamoon]

Thats very nice of you guys. Now what sprocket to look for any company that you use most?
Sorry guys but this is my 1st big bike and 2nd bike in my life so not much of knowledge here

[Rob W]

Whereabouts are you?

You could try John's of Romford, they usually have a fair bit in stock. If not try Soper's in Southend. Failing that eBay it and wait a few days.

Gimme a shout when you get one, and I'll change it for you if you want.


____________________
'90 TS50 > '04 Senda 125 > '91 ZXR400 > '90 CB-1 > '04 GSX-R1000 > '96 Bandit 600 > '89 ZXR750 H1 > '96 GSX-R750 SRAD > '98 RR-W Fireblade > '98 T595 Daytona > '03 Hornet 900 > '04 Fireblade > '16 GSX-S1000F (x2) > '23 XSR900

[Casper]

How is the chain? If its looking almost past it look at spending 120 quid (posted) on a new chain and sprocket kit.

https://www.wemoto.com/bikes/suzuki/gsxr_600_k3_zk3/03/picture/chain_and_sprocket_kit_did/

More for your bike

https://www.wemoto.com/bikes/suzuki/gsxr_600_k3_zk3/03/

[P.addy]

nice one Rob

[Rob W]

Did you get anything sorted?
____________________
'90 TS50 > '04 Senda 125 > '91 ZXR400 > '90 CB-1 > '04 GSX-R1000 > '96 Bandit 600 > '89 ZXR750 H1 > '96 GSX-R750 SRAD > '98 RR-W Fireblade > '98 T595 Daytona > '03 Hornet 900 > '04 Fireblade > '16 GSX-S1000F (x2) > '23 XSR900

[deamoon]

[deamoon]