Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


dropping tyre pressure to aid winter riding

Reply to topic
Bike Chat Forums Index -> General Bike Chat Goto page 1, 2  Next
View previous topic : View next topic  
Author Message

tsmith
Traffic Copper



Joined: 15 Apr 2005
Karma :

PostPosted: 11:26 - 02 Dec 2012    Post subject: dropping tyre pressure to aid winter riding Reply with quote

Just dropped the tyre pressures on my GPZ500 from 32/36 to 28/32 to aid winter riding

Anyone else tried this? Did it help?
 Back to top
View user's profile Send private message You must be logged in to rate posts

Walloper
Super Spammer



Joined: 24 Feb 2005
Karma :

PostPosted: 11:42 - 02 Dec 2012    Post subject: Re: dropping tyre pressure to aid winter riding Reply with quote

tomsmith wrote:
Just dropped the tyre pressures on my GPZ500 from 32/36 to 28/32 to aid winter riding

Anyone else tried this? Did it help?


I don't know if it will help as the tyre will flex more.
I would not go more than 3-4 PSI under recomended though in any case.
Dropping tyre pressure to ultra-low will help if you are balloxed in soft sand, snow or a bowl of cold, thick custard.
It's strange that bikers spend silly money on tyres compared to cars mile for mile but tyre manufacturers have no answer for cold roads.
I think they are pressuring car owners with those 'winter' tyres (with SIPS) purely as marketing and sales gimmick more than for road safety.
In colder countries like Sweden Norway insurance may not pay out on claims for vehicles that had the wrong winter tyre spec fitted.. Shocked
Kind of makes you think it's not long till the fannies that are the EU declare war on us Brits and force us to comply in the interests of 'safety'.
I think better driving standards are all we need in most parts of UK not different tyres.

If you're concerned about it you may try a softer compound for winter to help the tyre conform in cold weather. I won't bother my arse as I have never noticed it as much of a muchness and feel wet salty roads are the problem more than cold frosty roads.
____________________
W-ireless A-rtificial L-ifeform L-imited to O-bservation P-eacekeeping and E-fficient R-epair
 Back to top
View user's profile Send private message You must be logged in to rate posts

Howling TerrorOutOfOffice
Super Spammer



Joined: 05 Dec 2008
Karma :

PostPosted: 11:52 - 02 Dec 2012    Post subject: Reply with quote

Let me guess...Lower pressure = bigger contact patch and heats up quicker?

Stick with the manufacturers figures. If they thought the bike would handle better with lower pressures in winter they'd mention it.

I lowered mine to get my roadbike out of a muddy wood.

Also consider that less psi = lower carrying weight...Oh, and the crappy handling.
____________________
Diabolical homemade music Bandcamp and Soundcloud
Singer songwriter, Artist and allround good bloke Listen to Andrew Susan Johnston here
The Harry Turner Project
 Back to top
View user's profile Send private message Visit poster's website You must be logged in to rate posts
Vincent This post is not being displayed because the poster is banned. Unhide this post / all posts.

Rogerborg
nimbA



Joined: 26 Oct 2010
Karma :

PostPosted: 13:49 - 02 Dec 2012    Post subject: Reply with quote

They will get hotter, as I found out when I had a leaky valve on my 305 and only the hot rubber smell clued me in.

As to handling, I haven't noticed any difference, or at least not an improvement. But then I'm running a combination of Whatever Was On It on the front and Whatever Was Cheapest on the rear. I'd imagine picking the right rubber is going to do you a lot more good than fiddling with the pressure.
____________________
Biking is 1/20th as dangerous as horse riding.
GONE: HN125-8, LF-250B, GPz 305, GPZ 500S, Burgman 400 // RIDING: F650GS (800 twin), Royal Enfield Bullet Electra 500 AVL, Ninja 250R because racebike
 Back to top
View user's profile Send private message You must be logged in to rate posts

Torque Wrench
Nova Slayer



Joined: 17 Dec 2012
Karma :

PostPosted: 03:32 - 21 Dec 2012    Post subject: Reply with quote

Reducing Tyre Pressure = More contact area between tyre and tarmac which in turn will increase friction, heat. The increase in friction and contact area will improve grip.The increase in friction will also result in a higher heat cycle through the tire which in turn will impact on the life of your tyres; fuel consumpsion will also suffer as you will after overcome the increase in friction produced between the two mating pairs (tyre and tarmac). It will impact on handling, making for a more sluggish response, you may notice an increase in effort is required to turn the bars.

Coeff for tyre(Rubber) and tarmac is around 0.9 - 1.0
Coeff for tyre and Ice is around 0.15 - 0.18
 Back to top
View user's profile Send private message You must be logged in to rate posts

Islander
World Chat Champion



Joined: 05 Aug 2012
Karma :

PostPosted: 09:41 - 21 Dec 2012    Post subject: Re: dropping tyre pressure to aid winter riding Reply with quote

Walloper wrote:
tomsmith wrote:
Just dropped the tyre pressures on my GPZ500 from 32/36 to 28/32 to aid winter riding

Anyone else tried this? Did it help?


I don't know if it will help as the tyre will flex more.
I would not go more than 3-4 PSI under recomended though in any case.
Dropping tyre pressure to ultra-low will help if you are balloxed in soft sand, snow or a bowl of cold, thick custard.
It's strange that bikers spend silly money on tyres compared to cars mile for mile but tyre manufacturers have no answer for cold roads.
I think they are pressuring car owners with those 'winter' tyres (with SIPS) purely as marketing and sales gimmick more than for road safety.
In colder countries like Sweden Norway insurance may not pay out on claims for vehicles that had the wrong winter tyre spec fitted.. Shocked
Kind of makes you think it's not long till the fannies that are the EU declare war on us Brits and force us to comply in the interests of 'safety'.
I think better driving standards are all we need in most parts of UK not different tyres.

If you're concerned about it you may try a softer compound for winter to help the tyre conform in cold weather. I won't bother my arse as I have never noticed it as much of a muchness and feel wet salty roads are the problem more than cold frosty roads.


Winter tyres on a car do make a massive amount of difference. They aren't a panacea for poor driving skills but if you know how to drive in snow and ice anyway they really do give you an edge. I have a set that I get fitted every year. Last year I spent hogmanay down in the central glens with deep snow and ice and didn't have a single problem whereas locals with normal tyres were getting stuck.

I'd completely agree with the need for better driving standards though.
 Back to top
View user's profile Send private message You must be logged in to rate posts

chris-red
Have you considered a TDM?



Joined: 21 Sep 2005
Karma :

PostPosted: 10:08 - 21 Dec 2012    Post subject: Re: dropping tyre pressure to aid winter riding Reply with quote

I have found tyre pressures drop all by themselves in winter (colder so denser air?)

I've had to pump mine up. I have never felt to need to lower them.
____________________
Well, you know what they say. If you want to save the world, you have to push a few old ladies down the stairs.
Skudd:- Perhaps she just thinks you are a window licker and is being nice just in case she becomes another Jill Dando.
WANTED:- Fujinon (Fuji) M42 (Screw on) lenses, let me know if you have anything.
 Back to top
View user's profile Send private message You must be logged in to rate posts

Slacker24seve...
World Chat Champion



Joined: 10 May 2010
Karma :

PostPosted: 10:17 - 21 Dec 2012    Post subject: Re: dropping tyre pressure to aid winter riding Reply with quote

Islander wrote:


I'd completely agree with the need for better driving standards though.


My instructor actually took me out in thick snow and got me to deliberately get the car to slide and showed me how to deal with it. Best driving lesson ever!!!
____________________
Triumph Daytona 675 track bike + girlfriend's Honda Hornet 600
Selling a hack/winter bike for less than a grand? PM me.
Banger rallies are ace
 Back to top
View user's profile Send private message You must be logged in to rate posts

Matt B
World Chat Champion



Joined: 01 May 2012
Karma :

PostPosted: 10:24 - 21 Dec 2012    Post subject: Reply with quote

Dunlop say:

"Under-inflated tyres can result in imprecise cornering, higher running temperatures and overheating cracks, irregular tread wear at the edge of the contact patch, fatigue cracking, overstressing and eventual failure of the tyre carcass. Over-inflating tyres does not increase load-carrying capacity, but will result in a hard ride and accelerated tyre wear in the centre of the contact patch."

I wouldn't change for winter riding, I adjust my riding style not the tyre pressure.
____________________
stinkwheel: He had an animated .gif of a cat performing fellatio. It's not socially acceptable. It can have real life adverse effects on other people.
 Back to top
View user's profile Send private message You must be logged in to rate posts

Slacker24seve...
World Chat Champion



Joined: 10 May 2010
Karma :

PostPosted: 11:34 - 21 Dec 2012    Post subject: Reply with quote

Actually by default I run 34/36 rather that 36/42 as it does get more heat in them. Owners forums are full of that sort of information. I remember getting told in a novices trackday briefing that the recommended pressures are for litigation purposes, ie 2-up at max speed, rather than for outright grip.
____________________
Triumph Daytona 675 track bike + girlfriend's Honda Hornet 600
Selling a hack/winter bike for less than a grand? PM me.
Banger rallies are ace
 Back to top
View user's profile Send private message You must be logged in to rate posts

Walloper
Super Spammer



Joined: 24 Feb 2005
Karma :

PostPosted: 13:46 - 21 Dec 2012    Post subject: Reply with quote

Slacker24seven wrote:
Actually by default I run 34/36 rather that 36/42 as it does get more heat in them. Owners forums are full of that sort of information. I remember getting told in a novices trackday briefing that the recommended pressures are for litigation purposes, ie 2-up at max speed, rather than for outright grip.


Wot's that smell?

Very Happy

They told you wrong.

The tyre manufacturer gives tyre pressure based on performance from testing.

For the road the pressures will be correct. It won't affect performance that much in everyday use to be +- 3PSI though.

I round up/down the Bike OEM's figures for arithmetic sake +-1PSI
Or just set to the average between the loaded and unloaded figures. 42 instead of 44 loaded or 40 un-loaded.

I never have any issue concerning grip on the road. Bikes are rarely pushed to the limit of the tyre on the road. Unless you are a nutter. Smile

-1PSI may noticeably affect MPG (over hundreds of miles) and I would imagine setting the tyre to the top limit would provide the least rolling resistance but hee-haw grip.
____________________
W-ireless A-rtificial L-ifeform L-imited to O-bservation P-eacekeeping and E-fficient R-epair
 Back to top
View user's profile Send private message You must be logged in to rate posts

Turkish
Crazy Courier



Joined: 09 May 2012
Karma :

PostPosted: 21:26 - 21 Dec 2012    Post subject: Reply with quote

Torque Wrench wrote:
Reducing Tyre Pressure = More contact area between tyre and tarmac which in turn will increase friction, heat. The increase in friction and contact area will improve grip.The increase in friction will also result in a higher heat cycle through the tire which in turn will impact on the life of your tyres; fuel consumpsion will also suffer as you will after overcome the increase in friction produced between the two mating pairs (tyre and tarmac). It will impact on handling, making for a more sluggish response, you may notice an increase in effort is required to turn the bars.

Coeff for tyre(Rubber) and tarmac is around 0.9 - 1.0
Coeff for tyre and Ice is around 0.15 - 0.18


No. To pretty much everything in your post.

F = uN.

Which part of that equation relates to surface area? Oh that's right; none of it.

Yes, the contact patch will increase, but it means nothing because the normal reaction force and coefficient of friction remain unchanged.

Moreover, the handling of the bike will suffer and would be far more danerous than any peceived benefit from this mod. Do yourself a favour and set it up the way the designers intended.
____________________
ZX-6R G2
CBR125R RW6
 Back to top
View user's profile Send private message You must be logged in to rate posts

oldenuff
Renault 5 Driver



Joined: 01 Nov 2011
Karma :

PostPosted: 21:33 - 21 Dec 2012    Post subject: Elementary mechanics Reply with quote

Friction is independent of surface area. The only thing that a larger surface area does is to provide a bigger pathway to conduct away any heat generated.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

barrkel
World Chat Champion



Joined: 30 Jul 2012
Karma :

PostPosted: 21:47 - 21 Dec 2012    Post subject: Reply with quote

Larger surface area also reduces wear rate (or rather, spreads the wear over a larger area, so you don't e.g. end up with a heavily worn bit right in the middle so soon).

Of course friction is itself just an approximation of stochastic processes at a lower level. If you are torquing the rubber so hard that it is physically coming apart, having more in contact with the road may help.
____________________
Bikes: S1000R, SH350; Exes: Vity 125, PS125, YBR125, ER6f, VFR800, Brutale 920, CB600F, SH300x4
Best road ever ridden: www.youtube.com/watch?v=s2MhNxUEYtQ
 Back to top
View user's profile Send private message You must be logged in to rate posts

Torque Wrench
Nova Slayer



Joined: 17 Dec 2012
Karma :

PostPosted: 21:48 - 21 Dec 2012    Post subject: Reply with quote

@Turkish
I don't need a lesson in Engineering from a kid on CBR125R.
 Back to top
View user's profile Send private message You must be logged in to rate posts

Wafer_Thin_Ham
Super Spammer



Joined: 18 Nov 2005
Karma :

PostPosted: 21:54 - 21 Dec 2012    Post subject: Reply with quote

No point in dropping your pressures in winter in conclusion. It'll just make it more dodgey IMO.

Stick with what the manufacturer recommends. IME that gives you more than enough grip.
____________________
My Flickr
 Back to top
View user's profile Send private message You must be logged in to rate posts

johnsmith222
World Chat Champion



Joined: 26 Dec 2008
Karma :

PostPosted: 22:06 - 21 Dec 2012    Post subject: Reply with quote

barrkel wrote:
Larger surface area also reduces wear rate (or rather, spreads the wear over a larger area, so you don't e.g. end up with a heavily worn bit right in the middle so soon).


Can anyone confirm this?

I remember that some michelin tyres were succeptible to cupping and the advice was to ensure that tyre pressures were checked regularly to ensure that there was enough pressure in the tyre and prevent this from occurring as significantly.

Torque Wrench wrote:
@Turkish
I don't need a lesson in Engineering from a kid on CBR125R.


What does his bike have anything to do with it?


Last edited by johnsmith222 on 22:07 - 21 Dec 2012; edited 1 time in total
 Back to top
View user's profile Send private message You must be logged in to rate posts

covent.gardens
World Clap Champion



Joined: 09 Jun 2012
Karma :

PostPosted: 22:06 - 21 Dec 2012    Post subject: Reply with quote

Torque Wrench wrote:
@Turkish
I don't need a lesson in Engineering from a kid on CBR125R.

I'm not a physicist and can't tell which one of you is right, but seeing as you've resorted to insulting him as your only form of reply, my money is on him. Laughing
 Back to top
View user's profile Send private message You must be logged in to rate posts

Torque Wrench
Nova Slayer



Joined: 17 Dec 2012
Karma :

PostPosted: 22:16 - 21 Dec 2012    Post subject: Reply with quote

@Turkish
So reducing tyre pressure will not result in further drag which in turn increases load on the engine increasing fuel consumpion

Contact patch will increase as will drag which will mean areas of the tyre will see higher heat cycles, resulting in accelerated tyre wear.

This is dynamic remember not static.
 Back to top
View user's profile Send private message You must be logged in to rate posts

Torque Wrench
Nova Slayer



Joined: 17 Dec 2012
Karma :

PostPosted: 22:32 - 21 Dec 2012    Post subject: Reply with quote

The tyre will change shape when the wheel rotates, lower tyre pressure will cause the edges of the tyre to drag.
 Back to top
View user's profile Send private message You must be logged in to rate posts

Walloper
Super Spammer



Joined: 24 Feb 2005
Karma :

PostPosted: 22:39 - 21 Dec 2012    Post subject: Re: dropping tyre pressure to aid winter riding Reply with quote

Islander wrote:
Winter tyres on a car do make a massive amount of difference. They aren't a panacea for poor driving skills but if you know how to drive in snow and ice anyway they really do give you an edge. I have a set that I get fitted every year. Last year I spent hogmanay down in the central glens with deep snow and ice and didn't have a single problem whereas locals with normal tyres were getting stuck.

I'd completely agree with the need for better driving standards though.


Sorry I have watched the evidence and they certainly do help traction. What I am getting at is: For the few days of 'winter' roads we get in the more tropical parts of the UK Winter Tyres are a bit of a luxury. The only 'tests' I have seen are on ice/snow I have not seen any tests on 'cold' roads. And as has been said drive to the conditions and you can easily get around safely.
Perhaps like body armour in bike gear and comfort in cars we would get the 'Gladiator Effect' and think we were driving Gods shod with winter tyres. Smile
____________________
W-ireless A-rtificial L-ifeform L-imited to O-bservation P-eacekeeping and E-fficient R-epair
 Back to top
View user's profile Send private message You must be logged in to rate posts

Turkish
Crazy Courier



Joined: 09 May 2012
Karma :

PostPosted: 11:23 - 22 Dec 2012    Post subject: Reply with quote

Torque Wrench wrote:
@Turkish
So reducing tyre pressure will not result in further drag which in turn increases load on the engine increasing fuel consumpion

Contact patch will increase as will drag which will mean areas of the tyre will see higher heat cycles, resulting in accelerated tyre wear.

This is dynamic remember not static.



Rolling resistance will increase but this wont translate to any useable grip on the surface - as you say the force is deforming the tyre, that is the work it is doing.

The rolling resistance is a vector quantity in the direction of wheel rotation. It wont help lateral grip at all, which is arguably the only mechanism in which you can end up binning a bike.
____________________
ZX-6R G2
CBR125R RW6
 Back to top
View user's profile Send private message You must be logged in to rate posts

lozzypop1
Certified MILF!



Joined: 04 Jan 2006
Karma :

PostPosted: 12:00 - 22 Dec 2012    Post subject: Reply with quote

Turkish wrote:
Torque Wrench wrote:
@Turkish
So reducing tyre pressure will not result in further drag which in turn increases load on the engine increasing fuel consumpion

Contact patch will increase as will drag which will mean areas of the tyre will see higher heat cycles, resulting in accelerated tyre wear.

This is dynamic remember not static.



Rolling resistance will increase but this wont translate to any useable grip on the surface - as you say the force is deforming the tyre, that is the work it is doing.

The rolling resistance is a vector quantity in the direction of wheel rotation. It wont help lateral grip at all, which is arguably the only mechanism in which you can end up binning a bike.


So there you have it kids.. It's all about the sideways-lateral-torsional-force! Thumbs UpTwisted Evil
____________________
Funny, I used to hate being spanked as a child!
Tell me and I'll forget; show me and I may remember; involve me and I'll understand.
 Back to top
View user's profile Send private message You must be logged in to rate posts

wilz1234
Trackday Trickster



Joined: 14 Jul 2010
Karma :

PostPosted: 12:04 - 22 Dec 2012    Post subject: Reply with quote

Why do people think that increasing the size of contact patch will help. Certainly for mud/sand it will, but on ice....no.

Whats gripper on ice/snow, knobbly tires or slicks? The lower the contact patch, the more it presses into the ice
____________________
RS50 - ZXR400 - ZXR 400 - ZX7R - Bandit 600 - NTV 650
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts
Old Thread Alert!

The last post was made 13 years, 333 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> General Bike Chat All times are GMT
Goto page 1, 2  Next
Page 1 of 2

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 

Debug Mode: ON - Server: biskey (www) - Page Generation Time: 0.07 Sec - Server Load: 0.24 - MySQL Queries: 13 - Page Size: 135.69 Kb