Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


Are Iridium sparks pointless?

Reply to topic
Bike Chat Forums Index -> General Bike Chat
View previous topic : View next topic  
Author Message

Mondeo Man
Trackday Trickster



Joined: 21 May 2011
Karma :

PostPosted: 11:58 - 22 Dec 2012    Post subject: Are Iridium sparks pointless? Reply with quote

The sparks on my bike have done next to no miles (although it's been standing for over a year before I picked it up).

I have a set of Iridium sparks which I will either fit or sell. Is it worth fitting them? Will it make any meaningful difference in performance - to me, it's irrelevant if the Iridiums "last longer" - because the standard ones last long enough.

bandit 6 s
 Back to top
View user's profile Send private message You must be logged in to rate posts

0l0dom0l0
World Chat Champion



Joined: 21 Oct 2009
Karma :

PostPosted: 12:39 - 22 Dec 2012    Post subject: Reply with quote

It's up to you really.

You aren't going to notice an increase in power, you aren't going to notice an increase in economy.

But to be honest, if the bikes been sitting for a year un-used and you have them there... I'd swap them out.

Purely on the basis that you might sell them and get £10 for them, but for the hassle and everything else of selling them, posting them etc and the fact that plugs do de-grade over time, especially when not used and the fact we have lots of cold weather coming etc. I'd just change them.
____________________
CBT Passed: 30/08/2009, Theory Passed: 31/08/2010, Mod 1 Passed: 6/9/2010, Mod 2 Passed: 13/09/2010. Restriction ended 13/09/2012.

Bikes: 2007 Derbi GPR 50, 1998 Yamaha Fazer 600 (written off), 2002 Yamaha Fazer 600, 1994 CBR 600F, 2003 Triumph Daytona 600, Kawasaki ZX6R J1.....Current: 2006 Yamaha FZ6, 1998 Suzuki TL1000R and a Honda VFR 400 NC30.
 Back to top
View user's profile Send private message You must be logged in to rate posts

keggyhander
World Chat Champion



Joined: 30 Nov 2008
Karma :

PostPosted: 13:34 - 22 Dec 2012    Post subject: Reply with quote

I've found that the ignition "catches" quicker on cold starts with iridiums.
 Back to top
View user's profile Send private message You must be logged in to rate posts

Fizzer Thou
World Chat Champion



Joined: 06 Aug 2011
Karma :

PostPosted: 13:45 - 22 Dec 2012    Post subject: Reply with quote

If you have them it would be worth fitting them.

I have them on my R1 and my KTM enduro and notice a differance in throttle response,especially when used in conjunction with super-unleaded.

This is my own feeling and I do not expect everyone to agree with my findings.They just happen to work well for me.
____________________
Just talk bikes.What else is there?

Always have a 'Plan B'
 Back to top
View user's profile Send private message You must be logged in to rate posts

s1h
Nova Slayer



Joined: 14 Jan 2010
Karma :

PostPosted: 14:04 - 22 Dec 2012    Post subject: Reply with quote

Definitely better for cold starting the other year when it was -15 or whatever my bike was a pain to start when left outside overnight at work. Put these in and it fired up first time Everytime
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

fatpies
World Chat Champion



Joined: 01 Mar 2011
Karma :

PostPosted: 14:05 - 22 Dec 2012    Post subject: Reply with quote

Placebo?
____________________
"It's easy to attack and destroy an act of creation. It's a lot more difficult to perform one"
 Back to top
View user's profile Send private message You must be logged in to rate posts

AlexW
Spanner Monkey



Joined: 11 Sep 2011
Karma :

PostPosted: 14:11 - 22 Dec 2012    Post subject: Reply with quote

fatpies wrote:
Placebo?


I always wonder about this. I have Iridium spark plugs (I hate them being called "Sparks" :@ ) in my bike, I noticed it helped, but I do wonder how much differance it makes vs new standard plugs.
 Back to top
View user's profile Send private message You must be logged in to rate posts

temeluchus
World Chat Champion



Joined: 01 Oct 2008
Karma :

PostPosted: 15:21 - 22 Dec 2012    Post subject: Reply with quote

fatpies wrote:
Placebo?


No.

They do last longer, which is the main benefit.
____________________
Some shite cruiser. Now with guns and FREEDOM!
 Back to top
View user's profile Send private message Visit poster's website You must be logged in to rate posts

Rogerborg
nimbA



Joined: 26 Oct 2010
Karma :

PostPosted: 16:07 - 22 Dec 2012    Post subject: Reply with quote

Just for larks, I tried a selection of plugs in my 125. Two heat ratings, iridium, and a side gapped plug. It's my subjective belief that the iridium gave the easiest cold starting. That's all that I present it as.
____________________
Biking is 1/20th as dangerous as horse riding.
GONE: HN125-8, LF-250B, GPz 305, GPZ 500S, Burgman 400 // RIDING: F650GS (800 twin), Royal Enfield Bullet Electra 500 AVL, Ninja 250R because racebike
 Back to top
View user's profile Send private message You must be logged in to rate posts

nowhere.elysium
The Pork Lord



Joined: 02 Mar 2009
Karma :

PostPosted: 17:46 - 22 Dec 2012    Post subject: Reply with quote

They're more durable, and have a slightly higher conductivity than regular plugs, which probably explains the improved cold starts that people report. Personally, I'm not that fussed about them - if the shop has them and they're only a little bit more expensive, then I might splash out, but they're not something I'd actively seek out.
____________________
'10 SV650SF, '83 GS650GT (it lives!), Questionable DIY dash project, 3D Printer project, Lasercutter project
 Back to top
View user's profile Send private message You must be logged in to rate posts

Frost
World Chat Champion



Joined: 26 May 2004
Karma :

PostPosted: 18:44 - 22 Dec 2012    Post subject: Reply with quote

They last longer and perform more consistently. But you when you compare the cost of them vs the cost of buying normal plugs to last the same time period there's no real difference.
I stick with normal plugs and change them as soon as they get shitty or oiled up.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Paulington
World Chat Champion



Joined: 11 Mar 2009
Karma :

PostPosted: 18:51 - 22 Dec 2012    Post subject: Reply with quote

I have found no difference having iridium spark plugs in the Pan-European since they were fitted, starts and runs the same.

I think you notice the difference more on higher tuned engines, on the race engines having an iridium spark plug made it run better, easier to start, ran cooler and was just a noticeable improvement.

I fit them to everything as it's what we keep and they last longer, but I don't think you're missing out on much on bog-standard engines.
____________________
"Four wheels move the body, two wheels move the soul."
Current Vehicles: '89 Kawasaki KDX200, '99 Yamaha XV535, '00 Honda ST1100 Pan-European, '08 Suzuki GSX-R1000, '08 Mitsubishi Lancer GS4 2.0 TDCi, '15 BMW 1 Series 116d Sport Turbo.
CBT: 27/08/08. Theory: 04/09/09. Module 1: 16/09/09. Module 2: 01/10/09.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

oldenuff
Renault 5 Driver



Joined: 01 Nov 2011
Karma :

PostPosted: 19:07 - 22 Dec 2012    Post subject: Easier starting in the cold and wet Reply with quote

I get easier starting with the iridium plugs and as the price difference is small if you shop around why not use them?
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

MattEMulsion
World Chat Champion



Joined: 29 Aug 2004
Karma :

PostPosted: 20:39 - 22 Dec 2012    Post subject: Reply with quote

I've never used them in anything, performance bikes or cars. I do however use genuine original equipment plugs when I change them. If its good enough for when it leaves the factory then it'll do for me... Very Happy

Oh and on another note I don't think that unused (or little used) plugs will deteriorate with age, so if the ones in are haven't do many miles it would be false economy to change them. Thumbs Up
____________________
Yamaha YZF-R6
 Back to top
View user's profile Send private message You must be logged in to rate posts

stevo as b4
World Chat Champion



Joined: 17 Jul 2003
Karma :

PostPosted: 12:26 - 23 Dec 2012    Post subject: Reply with quote

here's a theory for the techie people then!

Say you have a tuned high compression engine or a turbocharged engine that is running either higher boost pressure than std or is using a nasp engine's ignition system and coils etc.

Would fitting iridium plugs maybe help to give better running or stronger sparks in an instance where higher than std cylinder pressures are trying to blow out the spark? Or is that normally a load of old bollocks and even tuned engines with forced induction are rarely able to overcome a std ignition system's ability.

My thinking was it might take less voltage at the plug with a thin iridium electrode to create the spark, and thus take some load off a coil that is close to capacity?

It sounds feasible to me, and would also explain why alot of straightline competition vehicles often have fancy expensive coils, and HT leads?
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Acemastr
World Chat Champion



Joined: 01 Oct 2008
Karma :

PostPosted: 12:44 - 23 Dec 2012    Post subject: Reply with quote

Blow out a spark? it's electrical!
____________________
2017 KTM 350 XC-F - 2014 Yamaha R6 - 2005 Yamaha YZ125
2016 Toyota Tacoma Limited
 Back to top
View user's profile Send private message You must be logged in to rate posts

stevo as b4
World Chat Champion



Joined: 17 Jul 2003
Karma :

PostPosted: 13:05 - 23 Dec 2012    Post subject: Reply with quote

I agree it sounds almost rediculous!
But it's aften talked about on alot of forums and tuning websites and by owners of tuned vehicles suffering a high rpm misfire at dyno days etc.

if you think of the pressure inside the cylinder of a petrol engine almost at the top of the compression stroke when ignition is required, then it's much harder to make a spark than it is with the plug outside in the fresh air. I've had it happen with faulty plug leads/spark plug insulators where they will spark ok tested outside in the fresh air, but not inside the engine. A new plug has been fine though.

I don't know the math to work out specific cylinder pressures, but say if a nasp engine is making around 200psi of peak cylinder pressure before ignition, then could a turbocharged engine easily be making 250-300psi at the same point? I just thought that the higher you increase the cylinder pressures above std, the harder you are making it for the spark to occur?
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

temeluchus
World Chat Champion



Joined: 01 Oct 2008
Karma :

PostPosted: 14:12 - 23 Dec 2012    Post subject: Reply with quote

stevo as b4 wrote:
here's a theory for the techie people then!

Say you have a tuned high compression engine or a turbocharged engine that is running either higher boost pressure than std or is using a nasp engine's ignition system and coils etc.


A high compression motor will stuff more air and fuel between the electrodes so will offer more electrical resistance hence needing more POWA to make a spark.


stevo as b4 wrote:
Would fitting iridium plugs maybe help to give better running or stronger sparks in an instance where higher than std cylinder pressures are trying to blow out the spark? Or is that normally a load of old bollocks and even tuned engines with forced induction are rarely able to overcome a std ignition system's ability.


The main thing with them is the longevity-iridium electrodes last longer.

stevo as b4 wrote:
My thinking was it might take less voltage at the plug with a thin iridium electrode to create the spark, and thus take some load off a coil that is close to capacity?

It sounds feasible to me, and would also explain why alot of straightline competition vehicles often have fancy expensive coils, and HT leads?


Yes.

Robbed from wikipedial

Quote:
The central electrode is usually the one designed to eject the electrons (the cathode) because it is the hottest (normally) part of the plug; it is easier to emit electrons from a hot surface, because of the same physical laws that increase emissions of vapor from hot surfaces (see thermionic emission). In addition, electrons are emitted where the electrical field strength is greatest; this is from wherever the radius of curvature of the surface is smallest, from a sharp point or edge rather than a flat surface (see corona discharge). It would be easiest to pull electrons from a pointed electrode but a pointed electrode would erode after only a few seconds. Instead, the electrons emit from the sharp edges of the end of the electrode; as these edges erode, the spark becomes weaker and less reliable.

____________________
Some shite cruiser. Now with guns and FREEDOM!
 Back to top
View user's profile Send private message Visit poster's website You must be logged in to rate posts

temeluchus
World Chat Champion



Joined: 01 Oct 2008
Karma :

PostPosted: 14:16 - 23 Dec 2012    Post subject: Re: Easier starting in the cold and wet Reply with quote

oldenuff wrote:
I get easier starting with the iridium plugs and as the price difference is small if you shop around why not use them?


The do require a slightly lower voltage to spark due to the narrow tip. They would certainly help in marginal situations (starting).

The improvement I suspect would be greater on older machines where the electrics are getting a bit tired, in the cold etc. On a modern machine with more pokey ignitions I guess it would make less difference.

Again the main improvement is longevity.
____________________
Some shite cruiser. Now with guns and FREEDOM!
 Back to top
View user's profile Send private message Visit poster's website You must be logged in to rate posts
Old Thread Alert!

The last post was made 13 years, 332 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> General Bike Chat All times are GMT
Page 1 of 1

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 

Debug Mode: ON - Server: biskey (www) - Page Generation Time: 0.08 Sec - Server Load: 0.44 - MySQL Queries: 13 - Page Size: 105.98 Kb