Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


Sufficient Warm Up Time For CBF500

Reply to topic
Bike Chat Forums Index -> General Bike Chat Goto page 1, 2  Next
View previous topic : View next topic  
Author Message

Scootaloo
Could Be A Chat Bot



Joined: 09 Dec 2011
Karma :

PostPosted: 11:32 - 22 Dec 2012    Post subject: Sufficient Warm Up Time For CBF500 Reply with quote

Hello All

I commute a short 15 minute drive to work.

At the very first segment in my commute (about 2-3 minutes in) I hit a fast dual carriageway which will often see it at about 50-70 mph.

In recent days when it's been really cold, I was wondering is it bad for a machine to be running at %60+ capacity within the first few minutes of driving?

The Engine feels ever-so-slightly restricted in the few minutes running up to the carriageway, but this soon is gone.

What are your thought's on this?
____________________
(CBF125 - 09) (CBF125 - 11) (CB-1 - 89) (CBF500 - 06) (Push Bike) (CB-1 - 90) (XL125 - 01) (VF500 - 83) (GPZ500 - 94) (GPZ500 - 95) (GPZ500 - 87) (XV535 - 94) (XV535 - 94) (GPZ500 - 87)
 Back to top
View user's profile Send private message You must be logged in to rate posts

.....
Quote Me Happy



Joined: 15 Jan 2005
Karma :

PostPosted: 11:34 - 22 Dec 2012    Post subject: Reply with quote

As long as you're not redlining it in every gear it will be fine.
 Back to top
View user's profile Send private message You must be logged in to rate posts

Scootaloo
Could Be A Chat Bot



Joined: 09 Dec 2011
Karma :

PostPosted: 11:51 - 22 Dec 2012    Post subject: Reply with quote

Joe wrote:
As long as you're not redlining it in every gear it will be fine.


Cool, All I needed to hear.

I don't red line it, but I do boot it a bit sometimes upto 8000 RPM (redline: 9500 RPM) so it should be operating well within it's printed design.
____________________
(CBF125 - 09) (CBF125 - 11) (CB-1 - 89) (CBF500 - 06) (Push Bike) (CB-1 - 90) (XL125 - 01) (VF500 - 83) (GPZ500 - 94) (GPZ500 - 95) (GPZ500 - 87) (XV535 - 94) (XV535 - 94) (GPZ500 - 87)
 Back to top
View user's profile Send private message You must be logged in to rate posts

Cheeseybeaner
World Chat Champion



Joined: 15 Jul 2010
Karma :

PostPosted: 11:57 - 22 Dec 2012    Post subject: Reply with quote

Just don't over rev it for a few miles. Personally I always try and get the engine to the dial position it normally reaches when warm on the temp gauge before I'd think about opening it up fully.
____________________
My bikes: 2003 KAWASAKI ZRX1200R, 1996 YAMAHA DIVERSION XJ900S
 Back to top
View user's profile Send private message You must be logged in to rate posts

esullivan
Could Be A Chat Bot



Joined: 06 Mar 2012
Karma :

PostPosted: 12:09 - 22 Dec 2012    Post subject: Reply with quote

I have a routine in the morning (which tend to be dark and cold at 6am):
* I unlock the bike from the ground anchor.
* walk it to the centre of the drive
* start the bike
* check the lights (each indicator and the brake)
* do a quick walkaround (looking for any very obvious broken things)
* put my lid and gloves on and then hop on and go.

The time between the third and sixth steps is plenty of time for a warm up. Probably too much, actually, for a fuel-injected bike, but I can do all this in a couple of minutes.

On the way home, I do a shorter version of this, starting the bike when I'm sitting on it and giving it about 30 seconds before setting off.
____________________
Current: '14 VFR800X Test passed 31/10/12.
Previous: '12 NC700S, '11 CBF 125, '04 SH 125.
 Back to top
View user's profile Send private message You must be logged in to rate posts

0l0dom0l0
World Chat Champion



Joined: 21 Oct 2009
Karma :

PostPosted: 12:48 - 22 Dec 2012    Post subject: Reply with quote

Pulling onto a 70mph dual carriageway in the first few mins of riding, isn't exactly ideal.

I try to keep my bike below 4k rpm until I see two bars on the temperature gauge which means the coolant is at 60 degrees, but as a general rule of thumb it won't see anywhere near the redline (8k and above) until 4-5 miles of riding.

It's partly the revs that kill cold engines, and it's partly the load. So whacking the throttle wide open at 4k revs will do just as much damage as taking it to the redline.

You can't help going on the dual carriageway, so the only thing I would suggest if you aren't already is start the bike up as early as you can, so if you're getting it out a garage, start it when you get it out then put on gear etc just to give it a chance to get a little bit of temperature before you join the dual carriageway.
____________________
CBT Passed: 30/08/2009, Theory Passed: 31/08/2010, Mod 1 Passed: 6/9/2010, Mod 2 Passed: 13/09/2010. Restriction ended 13/09/2012.

Bikes: 2007 Derbi GPR 50, 1998 Yamaha Fazer 600 (written off), 2002 Yamaha Fazer 600, 1994 CBR 600F, 2003 Triumph Daytona 600, Kawasaki ZX6R J1.....Current: 2006 Yamaha FZ6, 1998 Suzuki TL1000R and a Honda VFR 400 NC30.
 Back to top
View user's profile Send private message You must be logged in to rate posts

T0MMY
World Chat Champion



Joined: 08 Jun 2008
Karma :

PostPosted: 13:29 - 22 Dec 2012    Post subject: Reply with quote

I don't see a problem with just starting it, jumping on it and going as long as you don't accelerate hard or rev it much. Just ride gently until it's up to temperature, getting up to 70 can definitely still be gentle.
____________________
ZX6R + CBR600RR
 Back to top
View user's profile Send private message You must be logged in to rate posts

J.M.
World Chat Champion



Joined: 27 Mar 2011
Karma :

PostPosted: 13:38 - 22 Dec 2012    Post subject: Reply with quote

esullivan wrote:
The time between the third and sixth steps is plenty of time for a warm up. Probably too much, actually, for a fuel-injected bike, but I can do all this in a couple of minutes.

On the way home, I do a shorter version of this, starting the bike when I'm sitting on it and giving it about 30 seconds before setting off.


There's no real point giving it a lot of time to warm up idling, all it will do it warm the engine up unevenly.

The best thing that you can do it hop on the bike and ride it gently as soon as you're able until the engine has warmed up a little. The air whilst riding helps to spread the heat through the engine rather than keeping it centralised mainly in one area.
____________________
2004 R1 & 2018 XSR900
 Back to top
View user's profile Send private message You must be logged in to rate posts

AlexW
Spanner Monkey



Joined: 11 Sep 2011
Karma :

PostPosted: 14:03 - 22 Dec 2012    Post subject: Reply with quote

Depends how much you care, I start my bike on the road, drop it into gear and fire off up the road at full throttle.

But then I don't care Very Happy
 Back to top
View user's profile Send private message You must be logged in to rate posts

Scootaloo
Could Be A Chat Bot



Joined: 09 Dec 2011
Karma :

PostPosted: 14:17 - 22 Dec 2012    Post subject: Reply with quote

Not too fussed, Just trying to get as much mileage out of the machine as possible as this is going to be my commuter for the next 2 years.
____________________
(CBF125 - 09) (CBF125 - 11) (CB-1 - 89) (CBF500 - 06) (Push Bike) (CB-1 - 90) (XL125 - 01) (VF500 - 83) (GPZ500 - 94) (GPZ500 - 95) (GPZ500 - 87) (XV535 - 94) (XV535 - 94) (GPZ500 - 87)
 Back to top
View user's profile Send private message You must be logged in to rate posts

AyrshireBiker
Nova Slayer



Joined: 18 Nov 2012
Karma :

PostPosted: 14:27 - 22 Dec 2012    Post subject: Reply with quote

My bike is a Bandit 650 with carbs... I normally start it, let it tick over for a minute while I get my lid and gloves on then do the first 1/2 mile quite gently - which takes me onto the dual carriageway. By then it is pretty much warmed up.

You are as well getting on your way, doing a gentle 1/2 mile or so as you are letting it idle. Just don't start it, hop on and wack the throttle open!
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Vracktal
World Chat Champion



Joined: 04 Oct 2012
Karma :

PostPosted: 15:01 - 22 Dec 2012    Post subject: Reply with quote

I have an old 500 with carbs, generally I start it on half choke and let it run for about a minute or two, then turn off the choke and ride it gently for a half-mile or so, then ride normally.
 Back to top
View user's profile Send private message You must be logged in to rate posts

stevo as b4
World Chat Champion



Joined: 17 Jul 2003
Karma :

PostPosted: 15:06 - 22 Dec 2012    Post subject: Reply with quote

Scootaloo wrote:
Not too fussed, Just trying to get as much mileage out of the machine as possible as this is going to be my commuter for the next 2 years.


Id be more careful with the warming up when the bike is 12years old and has been over half way round the clock, than over the first 2years of it's life.

And Dom is right about really loading up a cold engine with big throttle openings at low revs is as bad if not worse than just letting it rev freely through the gears with less throttle.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Rogerborg
nimbA



Joined: 26 Oct 2010
Karma :

PostPosted: 15:27 - 22 Dec 2012    Post subject: Reply with quote

Anyone got comparative pictures of the internals of engines that have been run in a controlled, consistent fashion from several hundred cold starts, both from new, and when they've already had miles put on them?

Absent that, we're discussing unquantified myth and anecdotes. Everyone knows a guy who knows a guy.

Unless you're planning on keeping it long term, then I'd go ahead and ride it any way you like. Maybe change the oil a bit more regularly to assuage the folk wisdom.
____________________
Biking is 1/20th as dangerous as horse riding.
GONE: HN125-8, LF-250B, GPz 305, GPZ 500S, Burgman 400 // RIDING: F650GS (800 twin), Royal Enfield Bullet Electra 500 AVL, Ninja 250R because racebike
 Back to top
View user's profile Send private message You must be logged in to rate posts

Rogue_Shadow
World Chat Champion



Joined: 10 May 2012
Karma :

PostPosted: 15:41 - 22 Dec 2012    Post subject: Reply with quote

I gently rev my SV till the engine temperature reading comes on. Normally 1-2 minutes which is fine when parked at home, but annoying when I'm leaving a mates ect after the bikes been rested for a good couple hours.
 Back to top
View user's profile Send private message You must be logged in to rate posts

Howling TerrorOutOfOffice
Super Spammer



Joined: 05 Dec 2008
Karma :

PostPosted: 15:51 - 22 Dec 2012    Post subject: Reply with quote

^^^You don't need to.
Get on and ride it without thrashing or labouring the engine.

Choke/Fast Idler is on the handlebars and easily adjusted, unlike the cruddy CG where I rammed my hand into the area of the carburettor and punched it a few times.
____________________
Diabolical homemade music Bandcamp and Soundcloud
Singer songwriter, Artist and allround good bloke Listen to Andrew Susan Johnston here
The Harry Turner Project
 Back to top
View user's profile Send private message Visit poster's website You must be logged in to rate posts

P.addy
Red Rocket



Joined: 14 Feb 2008
Karma :

PostPosted: 16:12 - 22 Dec 2012    Post subject: Reply with quote

My 125 does a motorway journey every day.

I start the bike, it idles while I pop my lid on then I ride away.

It does about 2.5 miles then it gets on the motorway and sit at 70/75 which is full throttle Laughing
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Kickstart
The Oracle



Joined: 04 Feb 2002
Karma :

PostPosted: 22:43 - 22 Dec 2012    Post subject: Reply with quote

Hi

I would avoid more than half max revs until it is up to temp (rule of thumb, same revs as I would use for running in), but avoiding large loads is also a good idea.

That said just starting it and leaving it idling won't do it any good either (probably increase wear).

All the best

Keith
____________________
Traxpics, track day and racing photographs - Bimota Forum - Bike performance / thrust graphs for choosing gearing
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

hornetmike
World Chat Champion



Joined: 06 May 2008
Karma :

PostPosted: 08:33 - 23 Dec 2012    Post subject: Reply with quote

I worry more about getting the tyres warm rather then then the engine.

Chassis generally gives up before the engine on high mile bikes, how many people have killed a modern engine within 60k, whilst ridding normally ?
____________________
87 Honda CG 125 - 97 ER5 - SR 50 -81 Z250- 96 CBR 600 F- 94 GPX600R 88- GPX 400R- 87 GS 125 - 2006 Honda CB600F- 2003 ER5 - Honda CBF 1000 2009 - Honda CBR 600 RR 2011
Current BMW R1200GS 2010
 Back to top
View user's profile Send private message You must be logged in to rate posts

evoboy
World Chat Champion



Joined: 20 Aug 2009
Karma :

PostPosted: 10:27 - 23 Dec 2012    Post subject: Reply with quote

hornetmike wrote:
I worry more about getting the tyres warm rather then then the engine.

Chassis generally gives up before the engine on high mile bikes, how many people have killed a modern engine within 60k, whilst ridding normally ?


Agreed. There are many more factors that kill an engine on a modern bike. Lack of proper maintenance being the first...

I have to get onto a 60mph limit road less than a mile from my house. But then the zx7 is only turning some 4-5k at that speed.
____________________
Suzuki GT250 x7------- Fazer 600------CB250RS------Aprilia Rally 70----- Bandit 600

APT Motorcycles
 Back to top
View user's profile Send private message You must be logged in to rate posts

RhynoCZ
Super Spammer



Joined: 09 Mar 2012
Karma :

PostPosted: 10:51 - 23 Dec 2012    Post subject: Reply with quote

On the clock there is small C next to small square. That C stands for COLD, get it above the square and you're good to do what ever you want Thumbs Up

https://bikebreakers.ie/images/honda-cbf500-clock-set.jpg
____________________
'87 Honda XBR 500, '96 Kawasaki ZX7R P1, '90 Honda CB-1, '88 Kawasaki GPz550, MZ 150 ETZ
'95 Mercedes-Benz w202 C200 CGI, '98 Mercedes-Benz w210 E200 Kompressor
 Back to top
View user's profile Send private message You must be logged in to rate posts

DrSnoosnoo
World Chat Champion



Joined: 28 Mar 2012
Karma :

PostPosted: 22:45 - 23 Dec 2012    Post subject: Reply with quote

With mine, a ZZR 600, I start it with the choke for the amount of time to get my gloves and helmet on.then I ride it down the road to the 40 zone for about a kilometre then in my head she's warm enough
____________________
I'm Sam; Northern, Ginger, Lover
Did have: '95 ZZR600 '83 CG125 '97 ZZR1100 '15 Hypermotard 821 SP Do Have: '10 ZX10R
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

moppy
World Chat Champion



Joined: 25 Apr 2011
Karma :

PostPosted: 22:51 - 23 Dec 2012    Post subject: Reply with quote

Turn the bike on, put helmet + gloves on, wait until bike can idle without choke. Get on bike and ride as normal. Probably not what you should do, but it is what I do do.
 Back to top
View user's profile Send private message You must be logged in to rate posts

Noxious89123
World Chat Champion



Joined: 10 Jun 2007
Karma :

PostPosted: 00:55 - 24 Dec 2012    Post subject: Reply with quote

CBR runs hot as hell, by the time I've put my lid and gloves on and got out onto the main road it's already at 70c+
____________________
'06 Honda CBR125RW-6 ~ '00 Honda CBR600F-Y ~ '07 Honda CBR600RR-7 ~ Bikeless Sad
'53 Ford Ka 1.3 ~ '03 Vauxhall Astra SRi 1.8 ~ '52 Vauxhall Astra SRi 2.2 ~ '53 Vauxhall Astra GSi
 Back to top
View user's profile Send private message You must be logged in to rate posts

Walloper
Super Spammer



Joined: 24 Feb 2005
Karma :

PostPosted: 03:10 - 24 Dec 2012    Post subject: Reply with quote

Hand Are there any Kittens in the neighbourhood?

If it's free of kittens I'm sure it will be OK to do wot u r doo in.
____________________
W-ireless A-rtificial L-ifeform L-imited to O-bservation P-eacekeeping and E-fficient R-epair
 Back to top
View user's profile Send private message You must be logged in to rate posts
Old Thread Alert!

The last post was made 13 years, 331 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> General Bike Chat All times are GMT
Goto page 1, 2  Next
Page 1 of 2

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 

Debug Mode: ON - Server: biskey (www) - Page Generation Time: 0.11 Sec - Server Load: 0.61 - MySQL Queries: 15 - Page Size: 127.17 Kb