outer race of front wheel bearing stuck in hub.

[N cee thirty]

tried everything, dremel slot, chisel/ punch, heat gun, hammering, got a little bit of it off, but by now if it was normal it should have peeled off, so it must be welded to the hub, any ideas to remove it ?
____________________
'00 Aprilia RS50 > '92 Honda CG > '99 Yamaha Fazer > '91 Yamaha RXS > '79 Suzuki X5 > 01' Honda Cg > 07' Honda Cg > 82' Kawasaki Z200 > suzuki gsxr 400 gk73a > honda vfr 400 NC30 Mod 2 Passed 09/06/2011

Jewlio Iglesias wrote: I actually did vote BNP once

[MarJay]

Got a MIG welder?

Run a ring of weld around the inside face of the shell. This will then contract and cool and pull the race inward and hopefully pop out.
____________________
British beauty: Triumph Street Triple R; Loony stroker: KR1S; Track fun: GSXR750 L1; Commuter Missile: GSX-S1000F
Remember kids, bikes aren't like lego. You can't easily take a part from one bike and then fit it to another.

[N cee thirty]

Woll off here is coming to have a look tonight and says he knows someone with a welder to sort it if we can't sort it.

Never had a wheel bearing do this to me
____________________
'00 Aprilia RS50 > '92 Honda CG > '99 Yamaha Fazer > '91 Yamaha RXS > '79 Suzuki X5 > 01' Honda Cg > 07' Honda Cg > 82' Kawasaki Z200 > suzuki gsxr 400 gk73a > honda vfr 400 NC30 Mod 2 Passed 09/06/2011

Jewlio Iglesias wrote: I actually did vote BNP once

[damienbish]

Had this happen to me recently.

Everyone was trying to tell me I wasn't doing it right and there was no way it could be that stuck.
They changed their tune after having a go. As a last resort been as I didn't have access to a welder we cut dremmel slots and tried to use a chisel to get it out. Even after cutting all the way through the race and using a chisel bits just sheared off but as a whole it looked like a piece of the hub!

Ended up ebaying a second hand wheel. Only cost as much as the bearings did in the first place!

[N cee thirty]

lol thanks for that positive outcome there damien

hope the weld trick will work else i am well and truly fucked
____________________
'00 Aprilia RS50 > '92 Honda CG > '99 Yamaha Fazer > '91 Yamaha RXS > '79 Suzuki X5 > 01' Honda Cg > 07' Honda Cg > 82' Kawasaki Z200 > suzuki gsxr 400 gk73a > honda vfr 400 NC30 Mod 2 Passed 09/06/2011

Jewlio Iglesias wrote: I actually did vote BNP once

[lihp]

Hydraulic Press is your friend.
____________________
covent.gardens: lihp is my most favourite member ever

[N cee thirty]

[lihp]

Front or back wheel?
____________________
covent.gardens: lihp is my most favourite member ever

[N cee thirty]

front
____________________
'00 Aprilia RS50 > '92 Honda CG > '99 Yamaha Fazer > '91 Yamaha RXS > '79 Suzuki X5 > 01' Honda Cg > 07' Honda Cg > 82' Kawasaki Z200 > suzuki gsxr 400 gk73a > honda vfr 400 NC30 Mod 2 Passed 09/06/2011

Jewlio Iglesias wrote: I actually did vote BNP once

[lihp]

no problem. Only need the front when you stop

Is there a lip on the inside of the bearing or is it flush against the stop?

If you can get on the lip, I have a bearing puller that would get it out.
____________________
covent.gardens: lihp is my most favourite member ever

[N cee thirty]

[lihp]

Let me know if you get stuck. My puller should work but will require you to remove the opposite disc
____________________
covent.gardens: lihp is my most favourite member ever

[MaybeGuy]

have you taken the circlip out? lol if you haven't.

Anyway, get a socket the same size as the outer race and just wallop it.
____________________
Blue_SV650S wrote: it was a sh1te wheelie, but it proves that he can get it up in 3rd and can do angles. In summery, mattsprattuk is a gobby little sh1tebag, dopehead tw4t, but sadly for all of us, he probably isn't THAT full of sh1te!!
Kickstart wrote: Hi I tend to agree with Matt. All the best Keith

[stocksmenace]

had the same problem didn't have a burner so i had to figure another way to do it...myself and cheap ....no cutting or burning involved and took 10 mins.....here is the video hope it helps



https://www.youtube.com/watch?v=nvZ069bTTME&list=UUmWypgW7miqv35lAo8nH-jA&index=2
____________________
Triumph Sprint 900..Prev-ZZR600-Derbi terra-Mz251-Hyo Aquila

[temeluchus]

[N cee thirty]

Well got Woll round and after ruining a few of his snap on chisels, it finally cracked and managed to get the cunt out, fucking thing

all good now
____________________
'00 Aprilia RS50 > '92 Honda CG > '99 Yamaha Fazer > '91 Yamaha RXS > '79 Suzuki X5 > 01' Honda Cg > 07' Honda Cg > 82' Kawasaki Z200 > suzuki gsxr 400 gk73a > honda vfr 400 NC30 Mod 2 Passed 09/06/2011

Jewlio Iglesias wrote: I actually did vote BNP once

[Chalky.]

Woll is more man than you.

[N cee thirty]

[Chalky.]

[N cee thirty]

https://i825.photobucket.com/albums/zz176/robyarr/317476_10200513167965990_1009208772_n_zps63945f99.jpg

abit fucked likeeee
____________________
'00 Aprilia RS50 > '92 Honda CG > '99 Yamaha Fazer > '91 Yamaha RXS > '79 Suzuki X5 > 01' Honda Cg > 07' Honda Cg > 82' Kawasaki Z200 > suzuki gsxr 400 gk73a > honda vfr 400 NC30 Mod 2 Passed 09/06/2011

Jewlio Iglesias wrote: I actually did vote BNP once

[Islander]

Nah. Jivebunny would consider that a goer.

[SQL]